Preparation of co‐polymethyl(alkoxy)siloxanes by acid‐catalyzed controlled hydrolytic copolycondensation of methyl(trialkoxy)silane and tetraalkoxysilane

Polymethyl(alkoxy)siloxane copolymers, poly(MTES‐co‐TEOS), and poly(MTMS‐co‐TMOS), are prepared by acid‐catalyzed controlled hydrolytic co‐polycondensation of methyl(trialkoxy)silane MeSi(OR)₃ (R = Et (MTES) and Me (MTMS)) and tetra‐alkoxysilane Si(OR)₄ (R = Et (TEOS) and Me (TMOS)), respectively. The products are purified by fractional precipitation to provide polymethyl(alkoxy)siloxane copolymers with molecular weight 1000–10,000 (poly(MTES‐co‐TEOS)) or 1700–100,000 (poly(MTMS‐co‐TMOS)) that are stable to self‐condensation. These polymers are soluble in common organic solvents except for hexane, and form flexible and transparent free‐standing films with a tensile strength of 4.0–10.0 MPa. The structure of the polymethyl(alkoxy)siloxane copolymers is thought to be a random or a block co‐polymer. They are found to provide coating films with an adhesive strength up to 10, a refractive index of 1.36–1.40, and a dielectric constant of 3.5–3.6. The products also show better weathering stability than polyethoxysiloxane due to the hydrolytic polycondensation of TEOS. Field emission‐scanning electron micrography analysis reveals that coating films are composed of a micro‐phase separated structure. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4732–4741     

Dependency of ligand free energy landscapes on charge parameters and solvent models

We performed replica-exchange molecular dynamics (REMD) simulations of six ligands to examine the dependency of their free energy landscapes on charge parameters and solvent models. Six different charge parameter sets for each ligand were first generated by RESP and AM1-BCC methods using three different conformations independently. RESP charges showed some conformational dependency. On the other hand, AM1-BCC charges did not show conformational dependency and well reproduced the overall trend of RESP charges. The free energy landscapes obtained from the REMD simulations of ligands in vacuum, Generalized-Born (GB), and TIP3P solutions were then analyzed. We found that even small charge differences can produce qualitatively different landscapes in vacuum condition, but the differences tend to be much smaller under GB and TIP3P conditions. The simulations in the GB model well reproduced the landscapes in the TIP3P model using only a fraction of the computational cost. The protein-bound ligand conformations were rarely the global minimum states, but similar conformations were found to exist in aqueous solution without proteins in regions close to the global minimum, local minimum or intermediate states.     

Non-extractable photoinitiators based on thiol-functionalized benzophenones and thioxanthones

Non-extractable photoinitiators could be advantageous for use in biological, electronic, and food packaging applications. Therefore, thioxanthone and benzophenone derivatives were synthesized from 1,6-hexane dithiol and chlorinated benzophenone or thioxanthone. The efficiency of thiol-functionalized photoinitiators in combination with amine co-initiators was compared to benzophenone and isopropylthioxanthone with amine co-initiators, and the cleavage of photoinitiator 2,2-dimethoxy-1,2-diphenylethan-1-one in acrylic resins. The reaction kinetics were analyzed using photo-differential scanning calorimetry and real-time FTIR. Coating physical properties were evaluated by pendulum and pencil hardness, steel-wool scratch and mandrel bend tests. The non-extractable photoinitiators had higher absorbance than their benzophenone or isopropylthioxanthone counterparts due to the sulfide substitution on the phenyl ring, and the free thiol groups reacted with the acrylate by either an amine catalyzed Michael addition or a free-radical chain process. The combination of thiol-functionalized photoinitiators with secondary amines provides an efficient photoinitiator system that is locked into the photopolymerized network and cannot be extracted with typical solvents.     

Small-span bending test for determination of elastic-plastic properties of ultrathin Pt wires

A mechanical testing methodology for determination of elastic-plastic properties of very thin metallic wires using small-span bending under lateral load is described. Sufficient strain is locally developed in the tested section of wire by unsymmetrical bending with two opposite probes where one end of the wire is fixed on a substrate with rigid joint by Joule heat welding. From the load-displacement relationships obtained experimentally, Young’s modulus is determined by analytical formulation. Moreover, yield stress and hardening modulus of the wire are identified using an optimization strategy with finite-element analyses. The thin Pt wires with a nominal diameter of about 625 nm are examined by the testing scheme and the wires are found to have higher yield stress compared to bulk Pt.     

Public policy structuring incorporating reciprocal expectation analysis

This paper proposes a method of structuring public policy by incorporating reciprocal expectation analysis. The proposed method is characterized by three components: identification of the problem structure perceived by stakeholders using cognitive maps, policy structuring analysis with a value–driver matrix and a reciprocal expectation matrix, and feasibility analysis of agreements among the stakeholders. The three types of relationship among stakeholders are derived from the feasibility analysis, which are “Dosho-imu”, “Isho-imu”, and “Domu”. Three tests of feasibility to reach the agreement are then proposed: “information-sharing test”, “bargaining test”, and “reframing test”. A case study is presented, applying the method to strategic transportation planning in the Kanto region of Japan. Finally, the potential functions of the proposed method in practice are discussed.     

Oxygen‐sensing properties of 5,10,15,20‐tetraphenylporphinato platinum(II) and palladium(II) covalently bound on poly(isobutyl‐co‐2,2,2‐trifluoroethyl methacrylate)

A novel methacrylate monomer bearing 5,10,15,20‐tetraphenylporphyrinato palladium(II) (PdTPP) (monomer 1a ) was synthesized and copolymerized with isobutyl methacrylate (IBM) and 2,2,2‐trifluoroethyl methacrylate (TFEM) to give poly (IBM‐co‐TFEM) bearing PdTPP (copolymer 2a ) as a dye‐conjugated oxygen‐permeable polymer for pressure‐sensitive paint applications. The introduction of PdTPP into copolymer 2a was confirmed by UV–vis spectroscopy and extended X‐ray absorption fine structure analysis. The Stern–Volmer plots of the copolymer 2a and a mixture of PdTPP and poly(IBM‐co‐TFEM) both showed downward curvature, unlike that of the platinum complex analogue (copolymer 2b ) previously reported. The plots were successfully fitted with a two‐site model to give two distinct Stern–Volmer constants (K_SV1 and K_SV2) and the partition ratio f₁. Interestingly, the f₁ values for the copolymer 2a were almost constant at about 0.98, whereas those of the mixture of PdTPP and poly(IBM‐co‐TFEM) increased from 0.889 to 0.967 as the temperature was increased. This finding suggests that there are two distinct microheterogeneities, one temperature‐dependent and the other temperature‐independent, in the mixture of PdTPP and poly(IBM‐co‐TFEM). The dye‐conjugation approach effectively eliminates the temperature‐dependent, but not the temperature‐independent microheterogeneity. The luminescence decays of copolymers 2a and 2b and the corresponding mixtures in the absence of oxygen indicated that the temperature‐dependent microheterogeneity involves an oxygen diffusion process, whereas the temperature‐independent one appears to be inherent nature in PdTPP. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 663–670, 2010     

Total synthesis of (±)-erythravine based on ring closing dienyne metathesis

The first total synthesis of (±)-erythravine was achieved in thirteen steps from 3,4-dimethoxyphenethylamine using ring closing dienyne metathesis as the key step.     

First-principles energy band calculation for undoped and N-doped InTaO4 with layered wolframite-type structure

The electronic structures of undoped and N-doped InTaO₄ with optimized structures are calculated within the framework of the density functional theory. Calculated lattice constants are in excellent agreement with experimental values, within a difference of 2%. The valence band maximum (VBM) is located near the middle point on the ZD line and the conduction band minimum (CBM) near the middle point on the DX line. This means that InTaO₄ is an indirect-gap material and a minimum theoretical gap between VBM and CBM is ca. 3.7 eV. The valence band in the range from −6.0 to 0 eV mainly consists of O 2p orbitals, where In 4d5s5p and Ta 5d orbitals are slightly hybridized with O 2p orbitals. On the other hand, the conduction band below 5.5 eV is mainly composed of the Ta 5d orbitals and the contributions of In and O orbitals are small. The band gap of N-doped InTaO₄ decreases by 0.3 eV than that of undoped InTaO₄, because new gap states originating from N 2p orbitals appear near the top of the valence band. This result indicates that doping of N atoms into metal oxides is a useful method to develop photocatalysts sensitive to visible light.     

The effect of UV irradiation on the reduction of Au(III) ions adsorbed on manganese dioxide.

The effect of UV (ultraviolet) irradiation on the adsorption of Au(III) ions on manganese dioxide and their reduction to Au(0) (gold with 0 valence state) was investigated using XPS (X-ray photoelectron spectroscopy) and 197Au M?ssbauer spectroscopy. The UV irradiation accelerated the adsorption and the reduction. From the fact that the proportion of Au(0) estimated from Au 4f XPS spectra for surface analysis was significantly smaller than that from 197Au M?ssbauer spectra for bulk analysis, we deduced that Au(0) was interpenetrated to the inside of manganese dioxide (into deeper places than about 30 A) where XPS is impossible to detect. The content of surface hydroxyl groups on manganese dioxide also increased due to the UV irradiation. The relationship between the charge in the content of hydroxyl groups and the interpenetration of Au(0) is discussed.