Shear-thickening flow of nanoparticle suspensions flocculated by polymer bridging

The steady-shear viscosity, dynamic viscoelasticity, and stress relaxation behavior were measured for suspensions of silica nanoparticles dispersed in aqueous solutions of poly(ethylene oxide) (PEO). The suspensions of silica with diameters of 8-25 nm show striking shear-thickening profiles in steady shear and highly elastic responses under large strains in oscillatory shear. Since the silica particles are much smaller than the polymer coils, one molecule can extend through several particles by intrachain bridging. Each polymer coil may remain isolated as a floc unit and the silica particles hardly connect two flocs. Therefore, the flow of suspensions is Newtonian with low viscosity at low shear rates. When the polymer coils containing several nanoparticles are subjected to high shear fields, three-dimensional network is developed over the system. The shear-thickening flow may arise from the elastic forces of extended bridges. But, the polymer chain is easily detached from particle surface by thermal energy because of large curvature of particles. As a result, the network structures are reversibly broken down in a quiescent state and the suspensions behaves as viscoelastic fluids with the zero-shear viscosity.     

Comparative studies on the analysis of glycosylation heterogeneity of sialic acid-containing glycoproteins using capillary electrophoresis

Frontal affinity chromatography is a method for quantitative analysis of biomolecular interactions. We reinforced it by incorporating various merits of a contemporary liquid chromatography system. As a model study, the interaction between an immobilized Caenorhabditis elegans galectin (LEC-6) and fluorescently labeled oligosaccharides (pyridylaminated sugars) was analyzed. LEC-6 was coupled to N-hydroxysuccinimide-activated Sepharose 4 Fast Flow (100 μm diameter), and packed into a miniature column (e.g., 10×4.0 mm, 0.126 ml). Twelve pyridylaminated oligosaccharides were applied to the column through a 2-ml sample loop, and their elution patterns were monitored by fluorescence. The volume of the elution front (V) determined graphically for each sample was compared with that obtained in the presence of an excess amount of hapten saccharide, lactose (V₀); and the dissociation constant, K_d, was calculated according to the literature [K. Kasai, Y. Oda, M. Nishikawa, S. Ishii, J. Chromatogr. 376 (1986) 33]. This system also proved to be useful for an inverse confirmation; that is, application of galectins to an immobilized glycan column (in the present case, asialofetuin was immobilized on Sepharose 4 Fast Flow), and the elution profiles were monitored by fluorescence based on tryptophan. The relative affinity of various galectins for asialofetuin could be easily compared in terms of the extent of retardation. The newly constructed system proved to be extremely versatile. It enabled rapid (analysis time 12 min/cycle) and sensitive (20 nM for pyridylaminated derivatives, and 1 μg/ml for protein) analyses of lectin–carbohydrate interactions. It should become a powerful tool for elucidation of biomolecular interactions, in particular for functional analysis of a large number of proteins that should be the essential issues of post-genome projects.     

Reductive and catalytic monoalkylation of primary amines using nitriles as an alkylating reagent

[reaction: see text] A selective and catalytic mono-N-alkylation method of both aromatic and aliphatic amines using nitriles as an alkylating agent with Pd/C or Rh/C as a catalyst is described. This method is particularly attractive to provide an environmentally benign and applicable alkylation method of amines without using toxic and corrosive alkylating agents such as alkyl halides and carbonyl compounds.     

First principles based mean field model for oxygen reduction reaction

A first principles-based mean field model was developed for the oxygen reduction reaction (ORR) taking account of the coverage- and material-dependent reversible potentials of the elementary steps. This model was applied to the simulation of single crystal surfaces of Pt, Pt alloy and Pt core-shell catalysts under Ar and O(2) atmospheres. The results are consistent with those shown by past experimental and theoretical studies on surface coverages under Ar atmosphere, the shape of the current-voltage curve for the ORR on Pt(111) and the material-dependence of the ORR activity. This model suggests that the oxygen associative pathway including HO(2)(ads) formation is the main pathway on Pt(111), and that the rate determining step (RDS) is the removal step of O(ads) on Pt(111). This RDS is accelerated on several highly active Pt alloys and core-shell surfaces, and this acceleration decreases the reaction intermediate O(ads). The increase in the partial pressure of O(2)(g) increases the surface coverage with O(ads) and OH(ads), and this coverage increase reduces the apparent reaction order with respect to the partial pressure to less than unity. This model shows details on how the reaction pathway, RDS, surface coverages, Tafel slope, reaction order and material-dependent activity are interrelated.     

Liquid crystal gels cross-linked with 1,3,5-tris-(ω-methacryloyloxyalkyloxy)benzenes

A mixture of ω-(4-cyanobiphenyl-4′-yloxy)alkyl methacrylate and 1,3,5-tris-(ω-methacryloyloxyalkyloxy)benzene was heated to 200 °C at 5–10 °C/min. A large, broad exothermic transition peak was observed by differential scanning calorimetry during the first heating process. The transition indicated the formation of a networked polymer, which was then immersed for 24 h in various nematic liquid crystals, such as 4-cyano-4′-pentylbiphenyl, to give liquid crystal gels. The networked polymers and their corresponding liquid crystal gels exhibited different liquid crystal-isotropic transitions. The swelling behaviors of the liquid crystal gels were compared with those of gels cross-linked with 1,6-hexanediol dimethacrylate, trimethylpropane trimethacrylate, and pentaerythritol tetraacetate. The characteristics of liquid crystal gels cross-linked with 1,3,5-tris-(ω-methacryloyloxyalkyloxy)benzenes were studied.     

Proton-promoted oxygen atom transfer vs proton-coupled electron transfer of a non-heme iron(IV)-oxo complex

Sulfoxidation of thioanisoles by a non-heme iron(IV)-oxo complex, [(N4Py)Fe(IV)(O)](2+) (N4Py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine), was remarkably enhanced by perchloric acid (70% HClO(4)). The observed second-order rate constant (k(obs)) of sulfoxidation of thioaniosoles by [(N4Py)Fe(IV)(O)](2+) increases linearly with increasing concentration of HClO(4) (70%) in acetonitrile (MeCN)at 298 K. In contrast to sulfoxidation of thioanisoles by [(N4Py)Fe(IV)(O)](2+), the observed second-order rate constant (k(et)) of electron transfer from one-electron reductants such as [Fe(II)(Me(2)bpy)(3)](2+) (Me(2)bpy = 4,4-dimehtyl-2,2'-bipyridine) to [(N4Py)Fe(IV)(O)](2+) increases with increasing concentration of HClO(4), exhibiting second-order dependence on HClO(4) concentration. This indicates that the proton-coupled electron transfer (PCET) involves two protons associated with electron transfer from [Fe(II)(Me(2)bpy)(3)](2+) to [(N4Py)Fe(IV)(O)](2+) to yield [Fe(III)(Me(2)bpy)(3)](3+) and [(N4Py)Fe(III)(OH(2))](3+). The one-electron reduction potential (E(red)) of [(N4Py)Fe(IV)(O)](2+) in the presence of 10 mM HClO(4) (70%) in MeCN is determined to be 1.43 V vs SCE. A plot of E(red) vs log[HClO(4)] also indicates involvement of two protons in the PCET reduction of [(N4Py)Fe(IV)(O)](2+). The PCET driving force dependence of log k(et) is fitted in light of the Marcus theory of outer-sphere electron transfer to afford the reorganization of PCET (λ = 2.74 eV). The comparison of the k(obs) values of acid-promoted sulfoxidation of thioanisoles by [(N4Py)Fe(IV)(O)](2+) with the k(et) values of PCET from one-electron reductants to [(N4Py)Fe(IV)(O)](2+) at the same PCET driving force reveals that the acid-promoted sulfoxidation proceeds by one-step oxygen atom transfer from [(N4Py)Fe(IV)(O)](2+) to thioanisoles rather than outer-sphere PCET.     

First principles study of sulfuric acid anion adsorption on a Pt(111) electrode

A first principles theory combined with a continuum electrolyte theory is applied to adsorption of sulfuric acid anions on Pt(111) in 0.1 M H(2)SO(4) solution. The theoretical free energy diagram indicates that sulfuric acid anions adsorb as bisulfate in the potential range of 0.41 < U ≤ 0.48 V (RHE) and as sulfate in 0.48 V (RHE) < U. This diagram also indicates that sulfate inhibits formations of surface oxide and hydroxide. Charge analysis shows that the total charge transferred for the formation of the full coverage sulfate adlayer is 90 μC cm(-2), and that the electrosorption valency value is -0.45 to -0.95 in 0.41 < U ≤ 0.48 V (RHE) and -1.75 to -1.85 in U > 0.48 V (RHE) in good agreement with experiments reported in the literature. Vibration analysis indicates that the vibration frequencies observed experimentally at 1250 and 950 cm(-1) can be assigned, respectively, to the S-O (uncoordinated) and symmetric S-O stretching modes for sulfate, and that the higher frequency mode has a larger potential-dependence (58 cm(-1) V(-1)) than the lower one.