Porphyrin acids

The structural change from the porphyrin free base to monoacid and diacid by successive protonation has been studied by the IR, visible and NMR spectroscopy. The results have indicated that the cation and anion of the porphyrin diacid are strongly associated through H-bonding. The far IR spectra show especially marked differences in the free base, monoacid, and diacid due to the changes of the inner core of the porphyrin ring.     

Effect of polycondensation methods on molecular weight distribution of nylon 610

Polycondensation methods greatly influence the molecular weight distribution of poly(hexamethylene sebacamide) (nylon 610) as determined by gel permeation chromatography (GPC). The ratio of weight average molecular weight to number average molecular weight (M_w/M_n) was used as a measure for estimating the molecular weight distribution. The M_w/M_n ratios of nylon 610 obtained from melt, solid phase, and high temperature polycondensation methods were 2 to 3.5, which were expected values for the most probable distribution. However, those for polymers obtained from the direct polycondensation in the presence of triphenylphosphine, interfacial polycondensation and low temperature polycondensation using an acid chloride varied over a wide range from 3.5 to 8.5. The effect of the kind of organic solvents in the interfacial method on the M_w/M_n ratios was especially large, and the molecular weight distribution could be controlled to some extent by selecting an appropriate solvent.     

Efficient routes to optically active azido-, amino-, di-azido- and di-amino-cyclitols with chiro- and allo-configuration from myo-inositol

Efficient routes to hitherto unknown 1d-2,5-di-azido-di-deoxy-allo-inositol, 1d-2,5-di-amino-di-deoxy-allo-inositol, 1l-1-azido-1-deoxy-chiro-inositol and 1l-1-amino-1-deoxy-chiro-inositol were developed by using cheaply available myo-inositol as the starting material. Preliminary investigations on the enzyme inhibitory properties were done. The methodology reported is amenable to gram scale synthesis and thus can find application in natural product synthesis.     

Simultaneous determination of hypoxanthine,inosine, inosine-5′-phosphate and adenosine-5′-phosphate with a multielectrode enzyme sensor

A multielectrode enzyme sensor for the simultaneous determination of adenosine-5′-phosphate (AMP), inosine-5′-phosphate (IMP), inosine (HXR) and hypoxanthine (HX)in fish meat was developed by assembling four enzyme sensors for AMP, IMP, HXR and HX in a flow cell. These compounds were determined from oxygen consumption according to the following reactions: AMP $\text{AD}$ IMP $\text{NT}$ HXR $\text{NP, PO}{}^{\mathrm{3?}}{}_4$ HX $\text{XO, O}{}_2$ Uric acid where AD is AMP deaminase, NT is 5′-nucleotidase, NP is nucleoside phosphorylase and XO is xanthine oxidase. Enzymes were covalently bound to a membrane prepared from cellulose triacetate, 1,8-diamino-4-aminomethyloctane and glutaraldehyde. Sensors for HX, HXR, IMP and AMP were prepared by attaching membranes of XO, XONP, XO NPNT, and of XONPNT and AD, respectively, to four oxygen electrodes. Samples extracted from sea bass, bream, flounder, abalone and arkshell were analyzed within 5 min, from the simultaneous response curves of the four electrodes. Results obtained by the multisensor system were in good agreement with those determined by each single electrode.     

Measurement of regional cerebral blood flow by 133Xe inhalation method in patients with ruptured aneurysm

Regional cerebral blood flow (rCBF) was measured in 20 patients with ruptured aneurysm. rCBF images are obtained by 133Xe inhalation method using a ring type gamma camera (SET-020, Shimazu Co.) with high sensitivity collimator. Examinations are performed at acute stage (1-7 days after onset) and at subacute stage (8-14 days after onset). In acute stage, rCBF in the affected cerebral hemisphere has tendency to be low in 12 patients with angiospasm after the aneurysmal rupture comparing to those in patients without angiospasm. Low rCBF areas in cerebral hemisphere at acute stage were apt to become normal in subacute stage. rCBF measurement by 133Xe inhalation method seemed to be an useful method to evaluate rCBF in patients with ruptured aneurysm.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Asymmetric total syntheses of (+)-mycoepoxydiene and related natural product (-)-1893A: application of one-pot ring-opening/cross/ring-closing metathesis to construct their 9-oxabicyclo[4.2.1]nona-2,4-diene skeleton

The total syntheses of (+)-mycoepoxydiene and (-)-1893A have been completed. The present synthetic strategy features the use of one-pot ring-opening/cross metathesis (ROM/CM) followed by a ring-closing metathesis (RCM) reaction, allowing for the concise construction of the 9-oxabicyclo[4.2.1]nona-2,4-diene framework from a 7-oxabicyclo[2.2.1]hept-2-ene derivative and 1,3-butadiene. The sequential metathesis product was converted into (+)-mycoepoxydiene through the oxidative rearrangement of a furfuryl alcohol to a pyranone, thereby establishing its absolute stereochemistry. From the common intermediate, a structurally related natural product (-)-1893A was also synthesized via the vinylogous aldol reaction.     

Structure-specificity relationship of cardiac glycosides as a substrate for glucohydrolase II

Cardenolide glucohydrolase II (CGH II) is a cardenolide-specific glucohydrolase obtained from Digitalis lanata leaves. We investigated the structure-specificity relationship of several cardenolide disaccharides as a substrate for CGH II. Conformation analysis of the substrates was performed using molecular mechanics calculations. The sugar chain conformation of two inert glycosides was significantly different from that of the other glycosides. The other two glycosides, which were weak substrates of CGH II, were suggested to have an intramolecular hydrogen bond between the sugar groups. It was deduced that this hydrogen bond restricts the conformational change of the sugar chain and prevents the glycosides from enzymatic recognition.     

Thermal decomposition of vinylacetylene in shock waves

The thermal decomposition of vinylacetylene (C₄H₄) was studied behind reflected shock waves using both a single-pulse method (reaction time between 0.8 and 3.3 ms) and a time-resolved UV-absorption method (230 nm). The studies were done over the temperature range of 1170–1690 K at the total pressure range of 1.3–2.3 atm. The mechanism was used to interpret both the early and late stages of vinylacetylene decomposition at the high temperatures. It was confirmed that C₄H₄ dissociation proceeded through the following three channels. The rate constant expression of reaction (1) was determined as k₁ = 6.3 × 10¹³ exp(?87.1 kcal/RT) s^?1. The rate constants of the succeeding reactions (chain reaction, C₄H₄ + H → i-C₄H₃ + H₂ and C₄H₄ + H → C₂H₂ + C₂H₃ and decomposition reactions of free radicals, i-C₄H₃ + M → C₄H₂ + H + M) were confirmed or estimated. © John Wiley & Sons, Inc.     

Ab initio MO Calculations of benzene + TCNE and naphthalene + TCNE complexes with STO-3G π-split basis set

Ab initio SCF MO calculations have been carried out on benzene + TCNE (tetracyanoethylene) and naphthalene + TCNE complexes with the STO -3G, STO -3G π-split (STO -3G for π orbitals and a split basis for π orbitals), and 4–31G basis sets. The interaction energy, gross charges, dipole moment, and the electron density in the middle plane of the complexes have also been evaluated. The STO -3G π-split basis set is appropriate for the calculation of large π–π stacking complexes from two points of view, production of reliable results and ease of computations. The approximation scheme based on the semiorthogonalized orgitals is revealed to be very efficient to save CPU time and storage in such calculations. The stable conformation and the charge-transfer interaction of the two complexes are discussed on the basis of the calculated quantities.