Synthesis,characterisation, luminescence and defect centres in solution combustion synthesised CaZrO3:Tb3+ phosphor

Tb³⁺ doped CaZrO₃ has been prepared by an easy solution combustion synthesis method. The combustion derived powder was investigated by X-ray diffraction, Fourier-transform infrared spectrometry and scanning electron microscopy techniques. A room temperature photoluminescence study showed that the phosphors can be efficiently excited by 251 nm light with a weak emission in the blue and orange region and a strong emission in green light region. CaZrO₃:Tb³⁺ exhibits three thermoluminescence (TL) glow peaks at 126 °C, 200 °C and 480 °C. Electron Spin Resonance (ESR) studies were carried out to study the defect centres induced in the phosphor by gamma irradiation and also to identify the centres responsible for the TL peaks. The room temperature ESR spectrum of irradiated phosphor appears to be a superposition of two distinct centres. One of the centres (centre I) with principal g-value 2.0233 is identified as an O^? ion. Centre II with an axial symmetric g-tensor with principal values g_=1.9986 and g_?=2.0023 is assigned to an F⁺ centre (singly ionised oxygen vacancy). An additional defect centre is observed during thermal annealing experiments and this centre (assigned to F⁺ centre) seems to originate from an F centre (oxygen vacancy with two electrons). The F centre and also the F⁺ centre appear to correlate with the observed high temperature TL peak in CaZrO₃:Tb³⁺ phosphor.     

Effect of temporal resolution on the estimation of left ventricular function by cardiac MR imaging

The aim of this study was to investigate the effect of temporal resolution on the estimation of left ventricular (LV) function by cardiac magnetic resonance (MR) imaging using a steady-state free precession (SSFP) sequence. Left ventricular function was assessed by cine MR imaging using a segmented SSFP sequence in 10 healthy volunteers. Views per segment (VPS) were set at 8 and 20, resulting in high and low true temporal resolution, respectively. Irrespective of VPS, images were reconstructed at 40 cardiac phases, providing high apparent temporal resolution. Data were analyzed using 40, 20 and 10 phases to simulate different apparent temporal resolutions. Increasing the cardiac phases used for analysis slightly decreased mean end-systolic volume (ESV) and slightly increased mean ejection fraction (EF). No substantial difference in estimates of end-diastolic volume (EDV) was found between VPSs of 8 and 20. Imaging with a VPS of 20 yielded a larger ESV and smaller EF than imaging with a VPS of 8 when 40 phases were used. In conclusion, low true temporal resolution causes overestimation of ESV and underestimation of EF. Improvement of apparent temporal resolution mildly reduces but does not eliminate the errors caused by low true temporal resolution.     

Identification of \mathrm{\ensuremath J^{\pi} = 19/2^+} and \mathrm{\ensuremath 23/2^+} isomeric states in 127Sb

The nucleus $\ensuremath {\rm ^{127}Sb}$ , which is on the neutron-rich periphery of the $\ensuremath \beta$ -stability region, has been populated in complex nuclear reactions involving deep-inelastic and fusion-fission processes with $\ensuremath {\rm {}^{136}Xe}$ beams incident on thick targets. The previously known isomer at 2325 keV in $\ensuremath {\rm {}^{127}Sb}$ has been assigned spin and parity $\ensuremath 23/2^+$ , based on the measured $\ensuremath \gamma$ - $\ensuremath \gamma$ angular correlations and total internal conversion coefficients. The half-life has been determined to be 234(12) ns, somewhat longer than the value reported previously. The 2194 keV state has been assigned $\ensuremath J^{\pi} = 19/2^+$ and identified as an isomer with $\ensuremath T_{1/2} = 14(1) {\rm ns}$ , decaying by two $\ensuremath E2$ branches. The observed level energies and transition strengths are compared with the predictions of a shell model calculation. Two $\ensuremath 15/2^+$ states have been identified close in energy, and their properties are discussed in terms of mixing between vibrational and three-quasiparticle configurations.     

Investigation of in-plane orientation characteristics for Bi-2212/MgO thin films fabricated by the MOD method

We investigated the characteristics of in-plane orientation for c-axis-oriented Bi-2212 thin films on MgO substrates, fabricated by the metal–organic decomposition (MOD) method. Bi-2212/MgO films were annealed using a 2-step heat treatment. The dominant rotation angle of the Bi-2212 film was 45° ([1 0 0] of Bi-2212 // [1 1 0] of MgO) for a precursor film fabricated at 500 °C and fired at 840 °C for 0 min or 30 min. However, after firing for 1 h the ?-scanning signal indicating the 45° angle became smaller and the signal representing an angle of about ±12° ([1 0 0] of Bi-2212 // [5 1 0] of MgO) became larger. After firing for 3 h, this ±12° signal became dominant. The extent of the 45° angle’s shift to ±12° increased with increasing firing time. On the other hand, when the precursor film was fabricated at 430 °C, signals indicating angles of 0°, ∼±12°, and 45° were observed after firing for 30 min. The rotation angle depended on the precursor-fabrication temperature when the precursor film was fired at 840 °C for 0 min or 30 min.     

Influence of Cu electroplating solutions on boron carbon nitride (BCN) film

Cu electroplating is required for the fabrication of Cu/low-k interconnections. The permeation of a plating solution into low-k films during Cu electroplating is a serious challenge for 45-nm nodes and more complex devices. We investigated the influence of Cu electroplating solutions on boron carbon nitride (BCN) as a low-k film. After dipping it into a Cu electroplating solution that contained additives, the BCN film's hydrophilic surface changed to a hydrophobic surface, and the incorporation of water into the BCN film was suppressed by surfactant adsorption. Sulfuric residue was detected on the BCN sample by thermal desorption spectroscopy after treatment in the Cu electroplating solution with additives; however, it was found through electrical measurements that this solution did not affect the leakage current or the dielectric constant of the BCN film. We successfully fabricated an electroplating Cu layer on a BCN film with good adhesion, and we believe that this BCN film is a sufficiently useful material for Cu/BCN integration in LSI.     

Infrared luminescence, thermoluminescence and defect centres in Er and Yb co-doped ZnAl2O4 phosphor

Er and Yb co-doped ZnAl₂O₄ phosphors were prepared by solution combustion synthesis and the identification of Er and Yb were done by energy-dispersive X-ray analysis (EDX) studies. A luminescence at 1.5 μm, due to the ⁴I_13/2 →⁴I_15/2 transition, has been studied in the NIR region in Er and Yb co-doped ZnAl₂O₄ phosphors upon 980 nm CW pumping. Er-doped ZnAl₂O₄ exhibits two thermally stimulated luminescence (TSL) peaks around 174°C and 483°C, while Yb co-doped ZnAl₂O₄ exhibits TSL peaks around 170°C and 423°C. Electron spin resonance (ESR) studies were carried out to identify defect centres responsible for TSL peaks observed in the phosphors. Room temperature ESR spectrum appears to be a superposition of two distinct centres. These centres are assigned to an O⁻ ion and F⁺ centre. O⁻ ion appears to correlate with the 174°C TSL peak and F⁺ centre appears to relate with the high temperature TSL peak at 483°C in ZnAl₂O₄:Er phosphor.     

Infrared emission and defect centres in Er and Yb codoped Y3Al5O12 phosphors

YAG phosphor powders doped/codoped with Er³⁺/(Er³⁺ + Yb³⁺) have been synthesised by using the solution combustion method. The effect of direct pumping into the ⁴I_11/2 level under 980 nm excitation of doped/codoped Er³⁺/Yb³⁺−Er³⁺ in Y₃Al₅O₁₂ (YAG) phosphor responsible for an infrared (IR) emission peaking at ∼1.53 μm corresponding to the ⁴I_13/2→⁴I_15/2 transition has been studied. YAG exhibits three thermally-stimulated luminescence (TSL) peaks at around 140°C, 210°C and 445°C. Electron spin resonance (ESR) studies were carried out to identify the centres responsible for the TSL peaks. The room temperature ESR spectrum of irradiated phosphor appears to be a superposition of two distinct centres. One of the centres (centre I) with principal g-value 2.0176 is identified as O⁻ ion, while centre II with an isotropic g-factor 2.0020 is assigned to an F⁺ centre (singly ionised oxygen vacancy). An additional defect centre is observed during thermal-annealing experiments and this centre (assigned to F⁺ centre) seems to originate from an F-centre (oxygen vacancy with two electrons) and these two centres appear to correlate with the observed high-temperature TSL peak in YAG phosphor.     

STM/STS study of electronic states in highly underdoped Bi2212

Local density of states (LDOS) and the lattice structure of highly underdoped Bi₂Sr₂CaCu₂O_8+δ with T_c = 22 K and 30 K were investigated by a low temperature scanning tunneling microscope. The modulation structure of the Bi–O surface was strongly depressed in the highly underdoped samples. The depression was observed only in the samples subject to the strong reduction annealing process, suggesting that the strong reduction in excess oxygen could destroy the modulation structure. At a time, patch-like inhomogeneity in the gap map sometimes disappeared, indicating that the existence of excess oxygen has an important role in the patch formation. Analysis on the LDOS with various doping levels showed that there was no crossover energy, which separates a pseudogap and a superconducting gap and is proportional to T_c.     

Topological structure of the inter-band phase difference soliton in two-band superconductivity

Two-component superconductivity based on the two-band superconductor has a functional topology such as an inter-band phase difference soliton (i-soliton) to realize topological electronics (topolonics). Many gauge field theories are applied to investigate the topology of two-band superconductivity. To ease experimental and electronics applications, these theories should be refined. Weinberg–Salam theory and SU(2) (two-dimensional special unitary symmetry) gauge field theory are proper starting points. An effective extra force field because of the crystal structure and inter-band Josephson interaction, rather than spontaneous symmetry breaking, simplifies the conventional gauge field theory.