Photoinduced Formation of an Azobenzene‐Based CD‐Active Supramolecular Cyclic Dimer

A series of new photo‐responsive amino acid‐derived azobenzenedicarboxylic acid derivatives (S)‐ 1 a – e were synthesized. Compound (S)‐ 1 a in the trans form exhibited no circular dichroism (CD) signal in DMF under ambient conditions, whereas intense Cotton effects were observed upon UV irradiation, indicating the formation of a chiral supramolecular structure in the cis form. The CD signals disappeared when trifluoroacetic acid (TFA) was added to the solution. The ester counterpart [(S)‐ 1 a′ ] showed no CD signal. Hydrogen bonding between the carboxy groups seemed necessary for constructing the supramolecular structure. The kinetic studies of cis to trans isomerization of (S)‐ 1 a demonstrated that the formation of a chiral supramolecule enhances the stability of the cis‐azobenzene structure. The ESI mass spectrum of stilbenedicarboxylic acid (S)‐ 4 , an analogue of (S)‐ 1 b , confirmed the formation of a dimer. A theoretical CD study revealed that (S)‐ 1 a in the cis form should be present as a cyclic chiral dimer.     

Multi-scale theoretical study of support effect on sintering dynamics of Pt

The capability of theoretical durability studies to offer an efficient alternative methodology for predicting the potential performance of catalysts has improved in recent years. In this regard, multi-scale theoretical methods for predicting sintering behavior of Pt on various catalyst supports are being developed. Various types of Pt diffusions depending on support were confirmed by the micro-scale ultra accelerated quantum chemical molecular dynamics (UA-QCMD) method. Moreover, macro-scale sintering behavior of Pt/γ-Al₂O₃, Pt/ZrO₂ and Pt/CeO₂ catalysts were studied using a developed 3D sintering simulator. Experimental results were well reproduced. While Pt on γ-Al₂O₃ sintered significantly, Pt on ZrO₂ sintered slightly and Pt on CeO₂ demonstrated the highest stability against sintering.     

Generation of high-contrast and high-intensity laser pulses using an OPCPA preamplifier in a double CPA, Ti:sapphire laser system

We demonstrate a high-contrast, high-intensity double chirped-pulse amplification (CPA) Ti:sapphire laser system using an optical parametric chirped-pulse (OPCPA) pre- amplifier. By injecting cleaned microjoule seed pulses into the OPCPA, a temporal contrast greater than 10¹⁰ within picosecond times before the main femtosecond pulse is demonstrated with an output pulse energy of 1.7 J and a pulse duration of 30 fs, corresponding to a peak power of 60 TW at a 10 Hz repetition rate. This system uses a cryogenically-cooled Ti:sapphire final amplifier and generates focused peak intensities in excess of 10²⁰ W/cm².     

Polymethylmethacrylate-silica hybrid thin films heavily doped with spiropyran and exhibiting visual photochromism and high mechanical and chemical durability

Perhydropolysilazane (PHPS)—polymethylmethacrylate (PMMA)—spiropyran (SP) films were prepared by spin-coating using a solution of a mass ratio, PHPS:PMMA:SP:xylene = 0.8:0.2:0.25:3.6. The SP-doped PHPS-PMMA films were then exposed to the vapor from aqueous ammonia at room temperature, resulting in the formation of 1.7 μm thick, deep-red colored SP-doped PMMA-silica hybrid films. Due to the high concentration of SP, which could be achieved by the hydrophobic nature of PHPS and xylene, the photochromic color changes were visualized in spite of the small film thickness. The films had pencil hardness higher than 9H, and no SP leaching was observed even when the films were soaked in xylene for 24 h. Thus, thin films that exhibit visual photochromism with high mechanical and chemical durability could be prepared, which can never been achieved by conventional sol–gel methods.     

Quadrature Frequency Conversion Scheme Using CsLiB6O10 Crystals for the Efficient Second-Harmonic Generation of High Power Nd:YAG Laser

The ability of CsLiB_6O10 (CLBO) crystals for high power second-harmonic generation (SHG) of a 1064-nm Nd:YAG laser in a quadrature arrangement was experimentally demonstrated. A 532-nm second harmonic output pulse energy of 2.25 J was obtained with 3.21 J of an input 1064-nm fundamental pulse energy at a repetition rate of 10 Hz, corresponding to a power conversion efficiency in excess of 70%.     

Highly sensitive simultaneous quantification of indoxyl sulfate and 3-carboxy-4-methyl-5-propyl-2-furanpropanoic acid in human plasma using ultra-high-performance liquid chromatography coupled with tandem mass spectrometry

Indoxyl sulfate and 3-carboxy-4-methyl-5-propyl-2-furanpropanoic acid are uremic toxins that accumulate in renal failure and have been reported to decrease the activities of the drug-metabolizing enzyme cytochrome P450 3A and the drug transporter organic anion transporting polypeptides 1B, respectively. In this study, we established and validated an assay for simultaneous quantification of indoxyl sulfate and 3-carboxy-4-methyl-5-propyl-2-furanpropanoic acid in human plasma. The samples were pretreated by solid-phase extraction, and measured by ultra-high-performance liquid chromatography–tandem mass spectrometry. The validation results for this assay were within the acceptable limits recommended by the US Food and Drug Administration, with a lower limit of quantitation of 0.05 μg/mL for both indoxyl sulfate and 3-carboxy-4-methyl-5-propyl-2-furanpropanoic acid. Recovery rates of indoxyl sulfate and 3-carboxy-4-methyl-5-propyl-2-furanpropanoic acid corrected by internal standard were 100.7–101.9 and 100.2–101.3%, respectively. Matrix effects of indoxyl sulfate and 3-carboxy-4-methyl-5-propyl-2-furanpropanoic acid corrected by internal standard were 101.1–105.5 and 97.0–103.8%, respectively. The validated assay was used to analyze indoxyl sulfate and 3-carboxy-4-methyl-5-propyl-2-furanpropanoic acid concentrations in the plasma samples of healthy volunteers and patients with chronic kidney disease. All the measured plasma indoxyl sulfate and 3-carboxy-4-methyl-5-propyl-2-furanpropanoic acid concentrations were within the calibration ranges. This novel method may contribute to predicting the activities of drug-metabolizing enzymes and drug transporters in individual patients.     

Bulk crystal growth of congruent MgO-doped LiNbO3 crystal with stoichiometric structure and its second-harmonic-generation properties

A new LiNbO₃ bulk crystal has been grown by doping with MgO (cs-MgO:LN; Li₂O:Nb₂O₅:MgO=45.30:50.00:4.70, (Li_0.906Mg_0.047V^Li_0.047)NbO₃), which successfully has the congruent point coinciding with the stoichiometric point. Its second-harmonic-generation (SHG) properties were evaluated. It was found that cs-MgO:LN has a much more homogeneous composition leading to uniform in-plane distribution of the non-critical phase-matching wavelength than the conventional LiNbO₃ crystals such as congruent LiNbO₃ (c-LN), stoichiometric LiNbO₃ (s-LN), and MgO-doped congruent LiNbO₃ (5MgO:LN). This homogeneity arose from the observation that none of the solute components including ionic species were segregated at the interface during growth. The SHG conversion efficiency of cs-MgO:LN is comparable to those of s-LN and 5MgO:LN.     

H/D isotope effect of 1H MAS NMR spectra and 79Br NQR frequencies of piperidinium p-bromobenzoate and pyrrolidinium p-bromobenzoate

H/D isotope effects onto ⁷⁹Br NQR frequencies of piperidinium p-bromobenzoate were studied by deuterium substitution of hydrogen atoms which form two kinds of N–H?O type hydrogen bonds, and the isotope shift of ca. 100 kHz were detected for a whole observed temperature range. In addition, ¹H MAS NMR spectra measurements of piperidinium and pyrrolidinium p-bromobenzoate were carried out and little isotope changes of NMR line shape were detected. In order to reveal effects of molecular arrangements into the obtained isotope shift of NQR frequencies, single-crystal X-ray measurement of piperidinium p-bromobenzoate-d2 and density-functional-theory calculation were carried out. Our estimation showed the dihedral-angle change between piperidine and benzene ring contributes to isotope shift rather than those of N–H lengths by deuterium substitution.     

Highly efficient frequency doubling of high-energy Nd:YAG laser using a CsB3O5 crystal

We have demonstrated efficient frequency doubling of high-energy fundamental Nd:YAG laser pulse energy of the multi-joule (J) level at a high repetition rate using high optical-quality top-seeded solution growth CsB₃O₅(TSSG-CBO) crystal for the first time. Second-harmonic (532 nm) generation (SHG) output energy of 1.2 J at 10 Hz is obtained with a conversion efficiency of 60%. This result has been obtained at the multi-J level by the growth of high optical-quality TSSG-CBO crystal with the large effective nonlinear coefficient and high damage threshold. These results indicate that TSSG-CBO is a good candidate material for high-energy SHG of Nd-doped lasers at the several J level or more with high repetition rate.     

CH...anion interaction in BF2 complexes of C3-bridged oligopyrroles

Alkyl-substituted derivatives of 1,3-dipyrrolyl-1,3-propanedione BF2 complexes, the efficient receptors for halide and oxoanions with use of bridging CH as well as pyrrole NH, are reported. BF2 complexes with only one pyrrole NH interaction site (2d,e), which exhibit smaller affinities than the basic structure (2b), bind anions tightly, which is inferred by UV/vis absorption spectral changes, compared to the derivatives with an alkyl group at the bridging carbon (2f) or two pyrrole nitrogen sites (2c). With use of 1H NMR and theoretical studies for anion complexes of 2d and 2e, bridging CH (and one beta-CH in 2d) as well as pyrrole NH is found to interact with anions.