Sol-Gel Preparation of Coating Films Containing Noble Metal Colloids

Coating films containing Au, Ag, Pt and Pd metal colloids have been prepared by sol-gel processing. It is shown that for oxide films the temperature where the metal particles are precipitated by heating in air depends on metal species: 200°C for Au, 600°C for Ag, 800°C for Pt and 1000°C for Pd. The use of reducing atmosphere lowers the temperature for formation of noble metal colloids. This procedure can be used for direct formation of metal colloids from metal ions in the film as well as reduction of oxide particles to metal particles in the film. For an organic-inorganic matrix, noble metal colloids are precipitated by thermal reduction or photo-reduction. Thermal reduction occurs as a result of reduction by decomposing organic matter. Photo-reduction occurs as a result of UV irradiation.     

Crack-Free,Thick Ceramic Coating Films via Non-Repetitive Dip-Coating Using Polyvinylpyrrolidone as Stress-Relaxing Agent

BaTiO₃ and PZT films were prepared from alkoxide-acetate solutions containing polyvinylpyrrolidone (PVP) by non-repetitive dip-coating. It was demonstrated that PVP incorporated in gel films suppresses crack formation during heating and increases the critical thickness, the maximum thickness achievable without crack formation via single-step deposition. Using PVP crack-free BaTiO₃ and PZT films 1.2 and 0.5 m in thickness could be prepared, respectively, via single-step dip-coating. The films were fairly transparent and dense in microstructure. The tensile stress in heat-treated BaTiO₃ films was also demonstrated to decrease significantly by incorporating PVP in gel films.     

Anion modules: building blocks of supramolecular assemblies by combination with π-conjugated anion receptors

Dipyrrolyldiketone boron complexes, as π-conjugated acyclic anion receptors, act as building subunits of various assemblies through noncovalent interactions in the form of receptor-anion complexes. Instead of, or in addition to, the modification of receptor structures, the introduction of anion modules as building blocks for the assemblies was found to be useful in forming various soft materials. Gallic carboxylate derivatives 3-n (n = 16, 18, 20), as tetrabutylammonium (TBA) salts, form receptor-anion-module complexes that can be used to fabricate supramolecular assemblies. Combinations of aliphatic anion modules 3-n and receptors 1a,b along with a TBA cation afforded products with mesophases, which were indicated by differential scanning calorimetry and polarized optical microscopy. X-ray diffraction measurements of the solid states and mesophases of 1a·3-n·TBA and 1b·3-n·TBA revealed highly ordered structures including lamellar structures, which could be modulated by the lengths of the alkyl chains of the modules. Functional materials exhibiting electrical conductivity were fabricated by using combinations of anionic building blocks that form assemblies by themselves and π-conjugated acyclic receptors.     

Control of shell thickness in silica-coating of Au nanoparticles and their X-ray imaging properties

This paper describes a performance of precise control of shell thickness in silica-coating of Au nanoparticles based on a sol-gel process, and an investigation into X-ray imaging properties for the silica-coated Au (Au/SiO(2)) particles. The Au nanoparticles with a size of 16.9±1.2 nm prepared through a conventional citrate reduction method were used as core particles. The Au nanoparticles were silica-coated with a sol-gel reaction using tetraethylorthosilicate (TEOS) as a silica source, sodium hydroxide (NaOH) as a catalyst, and (3-aminopropyl) trimethoxysilane (APMS) as a silane coupling agent. An increase in TEOS concentration resulted in an increase in shell thickness. Under certain concentrations of Au, H(2)O, NaOH, and APMS, the Au/SiO(2) particles with silica shell thickness of 6.0-61.0 nm were produced with varying TEOS concentration. Absorption peak wavelength of surface plasmon resonance of the Au/SiO(2) colloid solution depended on silica shell thickness, which agreed approximately with the predictions by Mie theory. The as-prepared colloid solution could be concentrated up to an Au concentration of 0.19 M with salting-out and centrifugation. The concentrated colloid solution showed an X-ray image with high contrast, and a computed tomography value for the colloid solution with an Au concentration of 0.129 M was achieved 1329.7±52.7 HU.     

Structural Analysis and Inclusion Mechanism of Native and Permethylated α‐Cyclodextrin‐Based Rotaxanes Containing Alkylene Axles

Native α‐cyclodextrin‐ (α‐CD) and permethylated α‐CD (PMeCD)‐based rotaxanes with various short alkylene chains as axles can be synthesized through a urea end‐capping method. Native α‐CD tends to form [3]‐ or [5]pseudorotaxanes and not [2]‐ or [4]pseudorotaxanes, which indicates that the coupled CDs act as a single fragment. End‐capping reactions of the pseudorotaxanes with C18 and C24 axle lengths do not occur because the axle termini are covered by the densely stacked CDs. The number of PMeCDs on the pseudorotaxane is flexible and mainly depends on the axle length. Peracetylated α‐CD (PAcCD)‐based rotaxanes are synthesized through O‐acetylation of the α‐CD‐based rotaxanes without any decomposition of the rotaxanated structures. The structures of PMeCD‐based [3]‐ and [4]rotaxanes, and the molecular dynamics calculations on [3]pseudorotaxanes, indicate that the tail face of PMeCDs is regularly directed toward the axle termini. On the basis of the results obtained, it can be concluded that the directions and numbers of CDs in rotaxanes containing short alkylene chains depend on 1) the interactions between CDs, 2) the length of the alkylene axle, and 3) the interactions between the axle end and tail face of the CD.     

π‐Electron Systems That Form Planar and Interlocked Anion Complexes and Their Ion‐Pairing Assemblies

Interactions between designed charged species are important for the ordered arrangements of π‐electron systems in assembled structures. As precursors of π‐electron anion units, new arylethynyl‐substituted dipyrrolyldiketone boron complexes, which showed anion‐responsive behavior, were synthesized. They formed a variety of receptor–anion complexes ([1+1] and [2+1] types) in solution, and the stabilities of these complexes were discussed in terms of their thermodynamic parameters. Solid‐state ion‐pairing assemblies of [1+1]‐ and [2+1]‐type complexes with countercations were also revealed by single‐crystal X‐ray analysis. In particular, a totally charge‐segregated assembly was constructed based on negatively and positively charged layers fabricated from [2+1]‐type receptor–anion complexes and tetrabutylammonium cations, respectively. Furthermore, the [1+1]‐type anion complex of the receptor possessing long alkyl chains exhibited mesophases based on columnar assembled structures with contributions from charge‐by‐charge and charge‐segregated arrangements, which exhibited charge‐carrier transporting properties.