Methyltriethoxysilane-derived sol-gel coatings doped with silver metal particles

Silica sol-gel films were prepared by dipping, starting from an acid catalyzed solution of methyltriethoxysilane (MTES) and tetraethoxysilane (TEOS). Silver metal nanoparticles were produced in the silica layer by introducing in the sol-gel precursor solution AgNO₃ or AgClO₄·H₂O. The silver ions were thermally reduced in air at 800°C, giving an intense yellow coating film. The silver metal particles were observed by transmission electron microscopy and X-ray diffraction. The diameter of the silver particles was found to be about 10 nm. Absorption measurements in the UV-Vis were used to evaluate the volume fraction of silver colloids embedded in the silica layer.     

Binding of methyl orange and its homologs by polyion complexes consisting of a piperidinium cationic polymer and various polyanions in aqueous solution

A study was made of the formation of polyion complexes between a piperidinium cationic polymer and polyanions and of the binding of azo-dye anions (methyl, ethyl, propyl, and butyl orange) by these complexes. Sodium poly(acrylate), poly(styrenesulfonate), dextran sulfate, and carboxy-methylcellulose were used as polyanions. The resultant polyion complexes (insoluble in aqueous solutions) were compared for their ability to bind the small organic molecules in aqueous solutions, for example, of urea and an inorganic electrolyte (KCI), and exhibited a strong binding affinity toward these small anions. Polyion complexes that consisted of sodium poly(acrylate), dextran sulfate, and carboxymethylcellulose as polyanions cooperated in the binding, whereas the polyion complex of sodium poly(styrenesulfonate) did not. It was suggested that small organic anions interact with the polyion complexes primarily through electrostatic and hydrophobic forces.     

Preparation of novel,high‐modulus,swollen‐ or jungle‐gym‐type polyimide gels end‐crosslinked with 1,3,5‐tris(4‐aminophenyl)benzene

A novel preparation approach for high‐performance polyimide gels that are swollen or have a jungle‐gym‐type structure is proposed. A new rigid and symmetric trifunctional amine, 1,3,5‐tris(4‐aminophenyl)benzene (TAPB), was synthesized as a crosslinker. Three different kinds of amic acid oligomers derived from pyromellitic dianhydride (PMDA), 4,4′‐oxydiphthalic anhydride (ODPA), p‐phenylenediamine (PDA), and 4,4′‐oxydianiline (ODA) were end‐crosslinked with TAPB at a high temperature to make polyimide networks with different structures. Transparent polyimide gels were obtained from the ODPA–ODA/TAPB series with high compression moduli of about 1 MPa at their equilibrium swollen states in N‐methylpyrrolidone. Microscopic phase separation occurred during the gelation–imidization process when polyimide networks were generated from PMDA–PDA/TAPB and PMDA–ODA/TAPB. After these opaque polyimide networks were dried, a jungle‐gym‐like structure was obtained for the PMDA–PDA/TAPB and PMDA–ODA/TAPB series; that is, there was a high void content inside the networks (up to 70%) and little volume shrinkage. These polyimide networks did not expand but absorbed the solvent and showed moduli as high as those of solids. Therefore, using the highly rigid crosslinker TAPB combined with the flexible monomers ODPA and ODA and the rigid monomers PMDA and PDA, we prepared swollen, high‐performance polyimide gels and jungle‐gym‐type polyimide networks, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2501–2512, 2002     

Development of a nanostructured filter for pyrolysis wax purification:Effects of particulate filter aids

Wax obtained from the pyrolysis of polyethylene waste can contain inorganic contaminants and must be purified before application.We evaluated different filter aids(perlite,sand,and rice husk ash)for the filtration of a crude wax and a pyrolysis wax through a filter medium that was coated with nylon 6 nanofibers to improve filtration efficiency.We first examined the performance of the filter aids in improving crude wax filtration,with the filtration time,temperature,and pressure held constant at 1 h,170℃,and 2.5 bar,respectively.Oily wax was then produced by pyrolysis of high-density polyethylene(HDPE)waste in the temperature range 425-475℃.The best filter aid was perlite,which had a filtrate production rate of 5.47×10^-5m³/h.The highest oily wax yield(87.8%)was achieved at a pyrolysis temperature of 425℃.The assembly comprising the filter medium coated with nylon 6 nanofibers plus perlite as a filter aid was most suitable for removing impurities from the oily wax generated by the HDPE pyrolysis as it achieved a purification efficiency of 99.9%.     

Sonochemically enhanced adsorption and degradation of methyl orange with activated aluminas

Removal of Methyl orange (MO), as a model contaminants, in aqueous solution by the simultaneous application of ultrasound with the addition of porous adsorbent powders is reported. Activated alumina powders in acidic form were used as an adsorbent. Results showed that MO could be degraded by ultrasonic irradiation at 130 kHz with the first order rate constant of 8x10(-4) and 5x10(-4) sec(-1), in acidic and basic conditions, respectively, without adsorbents. Adsorption rates of MO by activated alumina mainly depended on the acidity of alumina, the pH of solution and the stirring speed. At pH=4.2 with mechanical stirring without ultrasonic radiation, acidic activated alumina (0.1 g/100 ml) removed MO at about two times more rapidly than ultrasonic irradiation. In the case of simultaneous application of ultrasound irradiation and activated alumina, MO was almost removed from the solution within 10 min, which corresponded to as a rate constant of 5x10(-3) sec(-1). This kind of synergistic enhancement of removal rate with ultrasound and adsorbents should be practically useful for the elimination of contaminants in the water treatment processes. In addition, the effects of pH and coexisting chemicals in the solution were examined for the processes. Although the adsorption process was effective in some selected conditions, ultrasonic degradation was more robust in wider range of pH and coexisting chemicals. Simultaneous application of the two processes can perform complementary.     

Macrocyclic Metal Complexes Bearing Rigid Polyaromatic Ligands: Synthesis and Catalytic Activity

We synthesised palladium and platinum complexes possessing cyclic and acyclic pincer‐type polyaromatic ligands and investigated their structural effect on the catalysis. The pincer‐type bis(6‐arylpyridin‐2‐yl)benzene skeleton was constructed via Kröhnke pyridine synthesis under transition metal‐free conditions on gram‐scale quantity. Ligand structure significantly influenced catalytic activity toward the platinum‐catalysed hydrosilylation of diphenyl acetylenes, despite the ligand‐independence of the conformations and electronic properties of these complexes.     

Photoluminescence properties of trace amounts of Pr and Tb in yttria-stabilized zirconia

We have investigated the photoluminescence (PL) properties of trace amounts of Pr and Tb in single-crystal samples of yttria-stabilized zironia (YSZ), and found that Pr of the order of 10⁻⁶ mass% and Tb of the order of 10⁻⁵ mass% in YSZ can be detected by the PL spectroscopy. The PL spectra of the YSZ samples for the 280 nm excitation were comprised of several peaks and a broad emission. The peaks were attributed to transitions of Pr³⁺ and Tb³⁺ in the YSZ samples, whereas the broad emission seemed to be attributed to the yttria-associated oxygen vacancies. The peak intensities corresponded to the amounts of Pr and Tb in the YSZ samples, the amounts of which were analyzed by glow discharge mass spectrometry. In the PL excitation spectra, but not in the photoabsorption spectra, small peaks at 376 and 381 nm were observed, and were attributed to the transitions of Tb³⁺ in the YSZ samples. The results of the PL excitation spectra corresponding to the Pr³⁺ line emissions suggest that the charge transfer occurs between the YSZ and Pr ion in it. The trace amounts of these lanthanoids in YSZ would disturb the decay process of the photoinduced electrons to the yttria-associated oxygen vacancies.     

Peripheral Modifications of meso-Hydroxyporphyrins: Formation of π-Electronic Anions and Ion-Pairing Assemblies

Phenyl groups were introduced at the β-positions proximal to the meso-hydroxy moiety in hydroxyporphyrin Ni^II complexes by oxidized BINAP Pd^II complexes. Ion-pairing assemblies of deprotonated π-electronic anions, anionic site of which was stabilized by the introduced phenyl moieties with a bulky cation, were formed. They showed charge-by-charge assemblies, assembly modes of which were modulated by the anionic building units.