O2 Binding and Dissociation and Ligand Exchange Reaction of O2 with CO in Polymer Composite Films of Hemoglobin

A polymer composite film of hemoglobin (Hb–polymer film) was prepared by the casting of an Hb–polymer mixed solution (weight ratio of Hb to polymer is 1 to 1). The percentages of O₂ and CO saturation of the Hb–dextran film were 46% and 70%, respectively. In the Hb solution, 100% saturation was observed for both ligands, and a humidified Hb–dextran film also showed 100% saturation. Water molecules would provide flexibility to the matrix polymer and promote a structural change in the Hb from a tense state (T) to a relaxed state (R). Thus the ligand binding to the Hb in the polymer films was strongly affected by the degree of interaction of Hb with the matrix polymers and the physical properties of the polymers. Inositol hexaphosphate (IHP) worked as an allosteric effector even in the solid polymer film and lowered the oxygen affinity of Hb. The O₂ transport through an Hb–polyethyleneimine (PEI) film with IHP showed the facilitated O₂ transport in comparison with the film without IHP because of the high dissociation rate of O₂ from Hb with IHP. © 1997 John Wiley & Sons, Ltd.     

掺锡As2S8薄膜光折变效应及其在条波导制备中的应用研究

实验研究了Sn₁As₂₀S₇₉非晶态半导体薄膜的光折变效应及其膜厚变化的现象,归纳了沉积态样品、退火态样品和光饱和态样品的实验规律,提出和采用紫外光激励的方法试制了Sn₁As₂₀S₇₉条形波导,632.8 nm波长导模激励显示该波导具有良好的导波特性. 关键词： 光波导技术 硫属化合物玻璃 光阻断效应 光折变效应     

Alkanethiols on platinum: multicomponent self-assembled monolayers

We have studied the formation of self-assembled monolayers (SAMs) of n-alkanethiols on platinum thin films using X-ray photoelectron spectroscopy (XPS), reflection-absorption infrared spectroscopy (RAIRS), spectroscopic ellipsometry (SE), and contact angle (CA) measurements. Specifically, SAMs of 1-hexanethiol, 1-dodecanethiol, and 1-octadecanethiol were grown on polycrystalline Pt films, and the effects of Pt surface preparation, deposition conditions, and solvent treatments on the initial quality and stability of the monolayer in air were investigated. The SAMs prepared under ambient conditions on piranha-cleaned and UV/ozone-cleaned substrates were compared to monolayers formed on template-stripped Pt in an inert atmosphere. We found that alkanethiols deposited from 1 mM ethanolic solutions on piranha-cleaned Pt formed densely packed monolayers in which alkyl chains were oriented close to the surface normal. Stored in the laboratory ambient, these monolayers were unchanged over about 1 week but were largely oxidized in about 1 month. No evidence was found of molecules being weakly bound within the monolayer or having undergone C-S bond scission; however, three distinct sulfur states were observed for all samples in the XPS of the S 2p region. The lowest- and highest-binding-energy components are assigned to alkylthiolate and partially oxidized alkylthiolate species, respectively. The remaining S 2p component (approximately one-third of the sulfur layer), intermediate in binding energy between the other two components, is attributed to a chemisorbed species with a S binding configuration distinct from the majority alkylthiolate: for example, S bound to Pt bound to O, S with a different Pt coordination number, or S in an adsorbed disulfide.     

Chemical component mapping of pulverized toner by scanning transmission X-ray microscopy

Toners are micron scale polymer particles constructed of several kinds of resin, pigment, wax, etc. Transmission electron microscopy (TEM) is used for observation of the dispersion of the component materials in toners, but TEM images cannot identify simultaneously all components. Scanning transmission X-ray microscopy (STXM) not only provides simultaneous observation of spatial distributions of wax, resin and carbon black in toners, but it also provides detailed, quantitative, chemical information about the wax and resin environments through chemical component maps derived from multiple energy image sequences. The capabilities of STXM for toner analysis are illustrated by results of a study of a toner for black/white copy/print applications.     

Thawing of frozen vegetables observed by a small dedicated MRI for food research

The thawing process for boiled and frozen edible vegetables was traced by a dedicated MRI for food research. The MRI system is small, with a 1.0-T static magnetic field, and can be placed in an ordinary research room with a light air conditioner. Images of green soybeans, broad beans, okra, asparagus and taro were measured by the spin-echo method (echo time=7 ms) with 0.1 or 0.2 s and 1 s repetition times. The images appeared along with the thawing time, and signals uniformly covered the sliced plane of the samples in the thawed condition. Information about the thawing process and tissue structures of the materials was obtained during transit thawing conditions. The thawing kinetics were examined with increased signal intensity, which were divided into two types. The signal increased linearly and saturated for okra and asparagus but exhibited convex curves for soybeans, broad beans and taro. The small MRI was stable, its handling was simple, and the internal structures of food materials could be accurately identified, although the grey-scale of the images was insufficient for determining precise textural fluctuations of tissue organization. We conclude that the devised MRI is useful for examining the quality of frozen foods and for developmental research into frozen foods.     

Hybrid Mesoporous-Silica Materials Functionalized by Pt(II) Complexes: Correlation between the Spatial Distribution of the Active Center, Photoluminescence Emission, and Photocatalytic Activity

[Pt(tpy)Cl]Cl (tpy: terpyridine) was successfully anchored to a series of mesoporous-silica materials that were modified with (3-aminopropyl)triethoxysilane with the aim of developing new inorganic-organic hybrid photocatalysts. Herein, the relationship between the luminescence characteristics and photocatalytic activities of these materials is examined as a function of Pt loading to define the spatial distribution of the Pt complex in the mesoporous channel. At low Pt loading, the Pt complex is located as an isolated species and exhibits strong photoluminescence emission at room temperature owing to metal-to-ligand charge-transfer ((3) MLCT) transitions (at about 530?nm). Energy- and/or electron-transfer from (3) MLCT to O(2) generate potentially active oxygen species, which are capable of promoting the selective photooxidation of styrene derivatives. On the other hand, short Pt???Pt interactions are prominent at high loading and the metal-metal-to-ligand charge-transfer ((3) MMLCT) transition is at about 620?nm. Such Pt complexes, which are situated close to each other, efficiently catalyze H(2) -evolution reactions in aqueous media in the presence of a sacrificial electron donor (EDTA) under visible-light irradiation. This study also investigates the effect of nanoconfinement on anchored guest complexes by considering the differences between the pore dimensions and structures of mesoporous-silica materials.     

Extended Fluorochromism of Anthracene Trimers with a meta‐Substituted Triphenylamine or Triphenylphosphine Core

Combining meta‐triphenylamine or triphenylphosphine with three anthracene fluorophores gives rise to fluorescent non‐planar triskelions 1 and 2 . The emissive properties of 1 are highly solvatochromic, yielding blue to pale green and even pale yellow fluorescence, whereas the blue emission of 2 is solvent‐insensitive. Anthracene trimers 1 and 2 are both emissive in the solid state, displaying yellow and pale green fluorescence, respectively, with moderate quantum yields.     

Preparation of molecularly imprinted polymers for organophosphates and their application to the recognition of organophosphorus compounds and phosphopeptides

Monodisperse molecularly imprinted polymers (MIPs) for diphenyl phosphate (DPP) and 1-naphthyl phosphate (1-NapP) have been prepared by a multi-step swelling and polymerization method using 4-vinylpyridine as a functional monomer, glycerol dimethacrylate as a crosslinker and cyclohexanol or 1-hexanol as a porogen. The retention and molecular-recognition properties of these MIPs for organophosphorus compounds were evaluated by HPLC using a mixture of phosphate buffer and acetonitrile as an eluent. In addition to shape recognition, hydrogen bonding and hydrophobic interactions could play an important role in the retention and molecular recognition of DPP and 1-NapP. Furthermore, the MIPs were applied to the separation of adenosine and adenosine phosphates (AMP, ADP and ATP). These phosphates were retained on the MIPs according to the number of phosphate groups in the molecule and were well separated from one another. Hydrogen bonding and hydrophobic interactions seemed to affect the retention and recognition of adenosine phosphates in low acetonitrile content, while hydrophilic interactions affected these properties in high acetonitrile content. Finally, the MIPs were applied to the trapping of phosphopeptides. The MIPs non-selectively trapped phosphopeptides, which have phosphorylated tyrosine, serine or threonine in the sequences, and successfully trapped four phosphopeptides in tryptic digests of bovine α-casein.