Wavelength-agile mid-infrared (5-10 microm) generation using a galvano-controlled KTiOPO4 optical parametric oscillator

A wavelength-agile mid-infrared (IR) ZnGeP2 (ZGP) optical parametric oscillator (OPO) using a galvano-controlled double-crystal KTiOPO4 (KTP) OPO was demonstrated. The mid-IR wavelength was tuned by varying the KTP OPO pump wavelength while the ZGP crystal angle remained fixed. Rapid tuning of the KTP OPO was achieved by changing the crystal angle by using the galvano scanner. Our mid-IR source can jump to a different wavelength without scanning through the intermediate wavelengths while also permitting continuous-wavelength scanning. The mid-IR source can be tuned from approximately 5to10 microm at a phase-matching angle of 51 degrees , while the pump wavelength is controlled in the 1.95-2.2 microm range.     

Use of amino acid composition to predict ligand-binding sites

A novel method for predicting the binding sites for druglike compounds on the surface of proteins was developed on the basis of the specific amino acid composition observed at the ligand-binding sites of ligand-protein complexes determined by X-ray analysis. A profile representing the preference of each of the 20 standard amino acids at the binding sites of druglike molecules was obtained for a small set of high-quality complex structures. An index termed propensity for ligand binding (PLB) was created from these profiles. The PLB index was used to predict the propensity of binding for 804 ligands at all potential binding sites on the proteins whose structures were determined by X-ray analysis. If the sites with the first two highest PLB indices are taken into consideration, the successfully predicted sites reached a high percentage of 86. The PLB prediction is relatively simple, but the validation study showed that it is both fast and accurate to detect ligand-binding sites, especially the binding sites of druglike molecules. Therefore, the PLB index can be used to predict the ligand-binding sites of uncharacterized protein structures and also to identify novel drug-binding sites of known drug targets.     

Anti-stokes emission in an additively colored KCl caused by excitation with a Nd: YAG laser

Abstract

We have observed the quadratic laser power dependence of two anti-Stokes emission bands at 15100cm^?1 and 14000cm^?1 in an additively colored KCl when excited with a Nd:YAG laser. The cross section of two photon absorption to cause the 14000cm^?1 band is estimated to be 4×10^?40cm⁴sec. We have observed that emission intensities are dependent on temperature in the range between 4. 2K and 130K. They are enhanced by means of optical bleaching and also with the increase of the F concentration. From a qualitative analysis of these observations, we propose that these emissions are correlated to the loose aggregation of the F centers.     

Growth and characterization of pyrene crystals on carbon nanofibers

Pyrene crystals were grown on carbon nanofibers (CNFs) by dispersing pyrene polycrystals and CNFs in water during ultrasonic irradiation, and they were characterized by scanning electron microscopy, X-ray diffractometry (XRD) and spectroscopy. The XRD measurements indicated that the orientation and size of the pyrene crystals on the CNF aggregates were different from that of the added pyrene polycrystals. Based on the spectroscopic properties of the pyrene crystals on the CNFs, the pyrene crystals on the CNF aggregates and on the individual CNFs were determined to be polycrystals and single crystals, respectively. These results indicate that pyrene crystals are produced on the CNFs by recrystallization of the added pyrene polycrystals and their crystal states depend on the aggregation state of the CNFs.     

An ultrasensitive and highly selective determination method for quinones by high-performance liquid chromatography with photochemically initiated luminol chemiluminescence

Quinones are a class of compounds of substantial toxicological and pharmacological interest. An ultrasensitive and highly selective chemiluminescence (CL) method was newly developed for the determination of quinones based on the utility of photochemically initiated luminol CL. The method involved ultraviolet (UV) irradiation of quinones to generate reactive oxygen species (ROS) through the unique photosensitization reaction accompanied with the photolytical generation of 3,6-dihydroxyphthalic acid (DHPA) from quinones. The photoproducts were detected by luminol CL reaction. Interestingly, it was noticed that DHPA had enhancement effect for the luminol CL. The generation of the enhancer (DHPA) in association with the oxidant (ROS) in the photochemical reaction greatly increases the sensitivity and selectivity of the proposed luminol CL method. In order to elucidate the type of ROS produced by the photosensitizaion reaction in relation to the proposed CL reaction, we investigated the quenching effect of selective ROS scavengers in the luminol CL. Although several ROS were generated, superoxide anion was the most effective ROS for the generated CL. Moreover, the enhancement mechanism of DHPA for luminol CL was confirmed. The enhancement was found to be through the formation of stabilized semiquinone anion radical that provided long-lived CL. The generation of the semiquinone radical was confirmed by electron spin resonance technique. Furthermore, we developed an HPLC method with on-line photochemical reaction followed by the proposed CL detection for the determination of four quinones. A luminol analogue, L-012, was used for its high sensitivity. The detection limits for quinones obtained with the proposed method (S/N = 3) were in the range 1.5–24 fmol that were 10–1000 times more sensitive compared with the previous methods. Finally, the developed HPLC-CL system was successfully applied for the determination of quinones in airborne particulate samples collected at Nagasaki city.     

Molybdenum-catalyzed transformation of molecular dinitrogen into silylamine: experimental and DFT study on the remarkable role of ferrocenyldiphosphine ligands

A molybdenum-dinitrogen complex bearing two ancillary ferrocenyldiphosphine ligands, trans-[Mo(N(2))(2)(depf)(2)] (depf = 1,1'-bis(diethylphosphino)ferrocene), catalyzes the conversion of molecular dinitrogen (N(2)) into silylamine (N(SiMe(3))(3)), which can be readily converted into NH(3) by acid treatment. The conversion has been achieved in the presence of Me(3)SiCl and Na at room temperature with a turnover number (TON) of 226 for the N(SiMe(3))(3) generation for 200 h. This TON is significantly improved relative to those ever reported by Hidai's group for mononuclear molybdenum complexes having monophosphine coligands [J. Am. Chem. Soc.1989, 111, 1939]. Density functional theory (DFT) calculations have been performed to figure out the mechanism of the catalytic N(2) conversion. On the basis of some pieces of experimental information, SiMe(3) radical is assumed to serve as an active species in the catalytic cycle. Calculated results also support that SiMe(3) radical is capable of working as an active species. The formation of five-coordinate intermediates, in which one of the N(2) ligands or one of the Mo-P bonds is dissociated, is essential in an early stage of the N(2) conversion. The SiMe(3) addition to a "hydrazido(2-)" intermediate having the NN(SiMe(3))(2) group will give a "hydrazido(1-)" intermediate having the (Me(3)Si)NN(SiMe(3))(2) group rather than a pair of a nitrido (≡N) intermediate and N(SiMe(3))(3). The N(SiMe(3))(3) generation would not occur at the Mo center but proceed after the (Me(3)Si)NN(SiMe(3))(2) group is released from the Mo center. The flexibility of the Mo-P bond between Mo and depf would play a vital role in the high catalysis of the Mo-Fe complex.     

Asymmetric addition of arylboronic acids to glyoxylate catalyzed by a ruthenium/Me-BIPAM complex

The enantioselective synthesis of α-hydroxy esters by ruthenium-catalyzed 1,2-addition of arylboronic acids to tert-butyl glyoxylate is described. The use of RuCl(2)(PPh(3))(3) with (R,R)-Me-BIPAM gave optically active mandelic acids of up to 99% ee. Addition of a fluoride salt such as potassium fluoride (KF) or caesium fluoride (CsF) was effective for achieving high enantioselectivities.     

Four new epoxy taxanes from needles of Taxus cuspidata (Taxaceae)

Four new epoxy taxoids were isolated from the needles of Taxus cuspidata. Their structures were established as 2a,9a-diacetoxy-5a-cinnamoyloxy-11,12-epoxy-10ss-hydroxytax-4(20)-en-13-one (1), 2a,10ss-diacetoxy-5a-cinnamoyloxy-11,12-epoxy-9a-hydroxytax-4(20)-en-13-one (2), 2a,9a-diacetoxy-11,12-epoxy-10ss,20-dihydroxytax-4-en-13-one (3) and 2a,10ss-diacetoxy-11,12-epoxy-9a,20-dihydroxytax-4-en-13-one (4) on the basis of spectral analysis including 1H-NMR, 13C-NMR, 1H-1H-COSY, HSQC, HMBC and HRFABMS. Compounds 3 and 4 are the first example of 11,12-epoxy taxoids with C-4 double bond found in T. cuspidata.     

Effects of thermal treatments on the recovery of adsorbed water and photocatalytic activities of TiO2 photocatalytic systems

The effects of thermal treatments on the rehydration process and photocatalytic activity were investigated by 1H NMR spectroscopy for six anatase abundant TiO2 photocatalysts with different properties. Acetic acid and benzoic acid were employed for photodecomposition in aqueous suspension. After the calcinations at 973 K, physisorbed water layers recovered relatively fast for P25, F4, and AMT-600 (shorter than 24 h) with no significant enhancement of the photocatalytic decomposition. On the other hand, for ST-01, UV-100, and AMT-100, the recovery was very slow (longer than 1 week) and only partially reversible, and the photocatalytic decomposition was considerably enhanced but retarded with rehydration. In the presence of adsorbed water, the binding of a carboxyl group of the molecules with adsorbed water is considered to compete with the direct adsorption on the surface, which reduces the amount of the direct adsorption and results in the reduction in the photocatalytic efficiency. In addition, the photocatalytic decomposition of benzoic acid with an aromatic ring was much faster in all of the TiO2 aqueous suspensions and more enhanced for the fully dehydroxylated TiO2 than that of acetic acid. These results suggest that the most efficient photocatalytic sites should be the hydrophobic sites on the TiO2 surface. The difference among the rehydration rates of different TiO2 is discussed in terms of thermally induced changes of surface morphology.