Chemiluminescence change of polyphenol dendrimers with different core molecules

Second generation polyphenol dendrimers (PDs) with different core molecules were synthesized, and their chemiluminescence (CL) was measured by reacting the PDs with H2O2 under alkaline conditions. All of the PDs showed a strong CL, more than 120-fold greater than that of gallic acid. Various CL intensities of the PDs were obtained using different core molecules in the PDs. The distance between each dendron in the PD structure is crucial in the PD CL intensity.     

Enantioselective C--C bond formation to sulfonylimines through use of the 2-pyridinesulfonyl group as a novel stereocontroller

Enantioselective C--C bond formation to 2-pyridinesulfonylimines afforded products with good enantioselectivity. Dynamic induction of chirality on the sulfur by coordination of a chiral Lewis acid to the pyridine nitrogen and one of the prochiral sulfonyl oxygens induces enantioselectivity. Since the 2-pyridinesulfonyl group can easily be removed after the reaction, it acts not only as an activating group but also as an efficient stereocontroller.     

Ca(1)(-)(x)Na(2)(x)Al(2)B(2)O(7): a structure with tunable density of Na(+) vacancies

A series of samples with the composition Ca(1)(-)(x)Na(2)(x)Al(2)B(2)O(7) (0 < x < or = 1) was investigated and a hexagonal structure with unusually large range of homogeneity (at least from x = 0.01 to 0.95) was revealed. The hexagonal phase consists of [Al(2)B(2)O(7)](infinity)(2)(-) lamellae stacked along the c axis, as in CaAl(2)B(2)O(7) and Na(2)Al(2)B(2)O(7). Nevertheless, the configuration and stacking sequence of the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae are different in these three structures. In the hexagonal structure of Ca(1)(-)(x)()Na(2)(x)()Al(2)B(2)O(7), Ca and half Na cations (Na1) statistically occupy the same crystallographic site which is located between the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae, the other half Na cations (Na2) distribute in the planes bisecting the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae. Depending on the composition, the site occupation factor of Na2 site can vary in the same range as x, leading to a tunable density of Na(+) vacancies in the structure. The AlO(4) tetrahedra and BO(3) triangles in the structure tilt in appropriate ways to improve the bond valence sum of Na2 cations which are not sufficiently bonded to the anions.     

Selective determination of 2,4-xylenol by gas chromatography/supersonic jet/resonance-enhanced multiphoton ionization/time-of-flight mass spectrometry

Gas chromatography/supersonic jet/resonance-enhanced multiphoton ionization/time-of-flight mass spectrometry (GC/SSJ/REMPI/TOF-MS) was employed for isomer-selective determination of 2,4-xylenol in river and seawater samples. The sample containing 2,4-xylenol was measured using argon, rather than helium, as the GC carrier gas to cool the analyte molecule sufficiently. The instrumental detection limit (IDL) achieved at a flow rate of 1 mLmin(-1) was 14 pg. Although this value was comparable to the value (ca. 10 pg) obtained by gas chromatography/electron impact/quadrupole mass spectrometry (GC/EI/QMS). When the flow rate was increased to 8 mLmin(-1), interference from the 2,5-xylenol isomer was completely suppressed. The IDL was degraded to 83 or 160 pg at a flow rate of 5 or 8 mLmin(-1), respectively. The recovery of 2,4-xylenol from the river and the seawater samples was 85 and 93%, respectively. The time for analysis was only 10 min per one sample in GC/SSJ/REMPI/TOF-MS. These results suggest that GC/SSJ/REMPI/TOF-MS is useful for the selective measurement of 2,4-xylenol, which has been designated a Class I chemical substance in the Pollutant Release and Transfer Register (PRTR).     

Hybrid molecular material exhibiting single-molecule magnet behavior and molecular conductivity

Two unique materials based on Mn4 single-molecule magnet (SMM) clusters (ST=9) and integer or non-integer average valent platinum maleonitriledithiolate (mnt2-) complexes, [{MnII2MnIII2(hmp)6(MeCN)2}{Pt(mnt)2}2][Pt(mnt)2]2.2MeCN (1) and [{MnII2MnIII2(hmp)6(MeCN)2}{Pt(mnt)2}4][Pt(mnt)2]2 (2), were synthesized by the material diffusion method and electrochemical oxidation, respectively (hmp-=2-hydroxymethylpyridinate). 1 and 2 are comprised of four and six [Pt(mnt)2]n- units, respectively, in addition to a common MnII2MnIII2 double-cuboidal unit, [MnII2MnIII2(hmp)6(MeCN)2]4+ (hereinafter [Mn4]4+). Among the [Pt(mnt)2]n- units, two units in 1 and four units in 2 are coordinated with the [Mn4]4+ unit, forming a 1D chain of {-[Mn4]-[Pt(mnt)2]2-} for 1 and a discrete subunit of {[Pt(mnt)2]2-[Mn4]-[Pt(mnt)2]2} for 2. The other two [Pt(mnt)2]n- units, occupying void space of the packing, form a stacking column with the coordinating [Pt(mnt)2]n- units, finally constructing hybrid frames of aggregates consisting of [Mn4]4+ units and [Pt(mnt)2]n- units. Electronic conductivity measurements revealed that 1 is an insulator and 2 is a semiconductor with sigma=0.22 S.cm(-1) at room temperature and an activation energy of 136 meV. Detailed magnetic measurements proved that the [Mn4]4+ units in 1 and 2 behave as SMMs with an ST=9 ground state at low temperatures. There is no significant interaction between [Mn4]4+ units and [Pt(mnt)2]n- units, but interactions between localized spins of [Pt(mnt)2]n- were detected even in 2 at low temperatures where the conductivity is electronically insulated. 2 is the first example of a hybridized material exhibiting SMM behavior and electronic conductivity.     

Aerobic oxidation of benzyl- and allylic alcohols under visible light irradiation of a fluorescent lamp in the presence of catalytic iodine

Benzyl alcohols and allylic alcohols were found to be oxidized to the corresponding aldehydes in the presence of a catalytic amount of iodine under irradiation of a fluorescent lamp.     

Separation of isomeric 2-aminopyridine derivatized N-glycans and N-glycopeptides of human serum immunoglobulin G by using a zwitterionic type of hydrophilic-interaction chromatography

Isomeric oligosaccharides and isomeric glycopeptides are sometimes difficult to separate on normal-phase (NP) and reversed-phase (RP) columns. A zwitterionic type of hydrophilic-interaction chromatography column with sulfobetaine groups (called ZIC-HILIC column) was first applied to the separation of 2-aminopyridine derivatized (PA) N-glycans and tryptic peptides of human serum immunoglobulin G (IgG). It is shown that the ZIC-HILIC column has high capability for structural recognition of isomeric N-glycans as well as high selectivity for glycopeptides. The former feature (i.e., structural recognition) was proven by sufficient separation of neutral PA N-glycan isomers, which are usually difficult to separate on NP and RP columns. In addition, it is noteworthy that IgG glycopeptides consisting of isomeric N-glycans and the same peptide sequences can be sufficiently separated on a ZIC-HILIC column. The latter feature (i.e., selectivity) was also demonstrated by easily separating two peptide groups with/without N-glycans. Thus, we note that the ZIC-HILIC column is highly promising for a simple analysis of N-glycans and N-glycopeptide samples.     

The first samarium(II)-mediated aryl radical cyclisation onto an aromatic ring

Intramolecular arylation of aryl radicals was mediated by SmI(2)/HMPA in the presence of i-PrOH to give spirocycles and/or reduced cine-cyclised products, while the reaction in the absence of i-PrOH gave the rearomatised fused rings.     

On simulation of tempered stable random variates

Various simulation methods for tempered stable random variates with stability index greater than one are investigated with a view towards practical implementation, in particular cases of very small scale parameter, which correspond to increments of a tempered stable Lévy process with a very short stepsize. Methods under consideration are based on acceptance-rejection sampling, a Gaussian approximation of a small jump component, and infinite shot noise series representations. Numerical results are presented to discuss advantages, limitations and trade-off issues between approximation error and required computing effort. With a given computing budget, an approximative acceptance-rejection sampling technique Baeumer and Meerschaert (2009) [11] is both most efficient and handiest in the case of very small scale parameter and moreover, any desired level of accuracy may be attained with a small amount of additional computing effort.