Topographic Measurement Of Internal Surfaces Using a Sequence of Stereo Charge-Coupled DeVice Endoscopic Images: (1) Method

In endoscopic diagnosis, there has been a strong requirement to measure the internal surface topography of the rectum or esophagus. Accurate measurement, however, is very difficult, because the object is usually observed from an inclined view. In this paper, we propose a method to overcome this difficulty utilizing sequential stereo-pair images; the relative shape is roughly measured from sequential images taken by one of the change coupled device (CCD) cameras, and the size is determined by stereo-pair matching using the measured shape. A coarse-to-fine approach is also used to improve the resolution of topographic measurement. Through a basic experiment using a monocular CCD endoscope and a polyp phantom, the proposed method is confirmed to improve measurement accuracy in comparison with conventional methods.     

Mod 7 Cohomology Algebra of Held Simple Group

We calculate the mod7 cohomology algebra of the Held simple group, whose Sylow 7-subgroups are extraspecial of order 7³ and exponent 7. Our method depends on the analysis of the Carlson module of a regular class belonging to a system of parameters.     

Characterization of a glucose sensor prepared by electropolymerization of pyrroles containing a tris-bipyridine osmium complex.

A glucose sensor was developed by electrocopolymerization using pyrroles containing a tris-bipyridine (bpy) osmium complex (Os-py), pyrrole (py), pyrrole propanoic acid (PPA) and glucose oxidase (GOx) to improve the key performance characteristics, such as the sensitivity, selectivity, and long-term stability. Tris-bipyridine osmium pyrrole complexes with four different methylene moieties were utilized to correlate the methylene length with the glucose sensor performance. The electrocatalytic response of glucose was clearly observed at electrodes modified with Os-py, except for the electrode immobilized with the Os-py complex containing the shortest methylene moiety. The current response to glucose increased up to a concentration of 100 mmol dm(-3). The electrocatalytic response to glucose at the [Os(bpy)(2)(py(6)-bpy)](2+/3+)/py/PPA/GOx electrode was stable for more than 100 days. Dissolved oxygen and potential interference compounds (ascorbic acid, uric acid, and acetaminophen) minimally perturbed the current response to glucose at the [Os(DM-bpy)(2)(py(6)-bpy)](2+/3+)/py/PPA/GOx electrode. Based on these results, a longer methylene moiety appears to improve the performance characteristics of a glucose sensor fabricated via the electropolymerization of tris-bipyridine osmium pyrrole complexes.     

Crystallization and structure formation of block copolymers containing a glassy amorphous component

Formation of higher‐order structure in crystallization from microphase‐separated melts was studied for polystyrene–polyethylene (PS–PE) diblock copolymers and PS–PE–PS triblock copolymers with time‐resolved synchrotron small‐angle X‐ray scattering (SR–SAXS) techniques. The PE block was crystallized at temperatures when the PS block was in the glassy state. In both crystallization and melting processes, only the peak intensity in the SR–SAXS curve changed, however, the peak positions including higher‐order peaks did not change. This means that the microphase‐structure in the crystalline state was completely the same as that in the molten state. These behaviors were observed regardless of any melt microphase structure. Also, once a stable microphase structure was formed in the molten state, the structure was not changed even if crystallization and melting were repeated. Behavior of crystallization from such microphase‐separated melts was also studied. Apparent activation energies of crystallization were high for all block copolymers, compared with that for the PE homopolymer. In particular, the triblock copolymers showed higher apparent activation energies than the diblock copolymers. Both degrees of crystallinity and Avrami indices were greatly suppressed in crystallization from the cylindrical domain. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4199–4206, 2004     

Potentiometric determination of bromate using an Fe(III)-Fe(II) potential buffer by circulatory flow-injection analysis.

A method for the potentiometric determination of bromate by circulatory flow injection analysis (CFIA) is described. The procedure involves the use of an Fe(III)-Fe(II) potential buffer solution, which is recycled via a reservoir. The analytical method is based on a linear relationship between the concentration of bromate and a very transient potential change in the electrode potential due to the generation of intermediate bromine during the reaction of bromate with the Fe(III)-Fe(II) potential buffer solution, which also contains NaBr, (NH4)6Mo7O24 and H2SO4. An aliquot (5 microl) of a bromate sample solution was injected into the stream of the potential buffer solution, 100 ml of which was circulated at a flow rate of 1 ml/min; the potential buffer solution stream was then returned to the reservoir after passing through a flow-through redox electrode detector. A potential change due to the reaction of the injected sample with the potential buffer in a reaction coil was measured with the detector in the form of a peak signal. The effects of the bromide, sulfuric acid and Fe(III)-Fe(II) concentrations in the potential buffer, and length of the reaction coil on the peak heights were examined in order to optimize the proposed CFIA method. The analytical sensitivities to bromate were 5.6 mV/microM for 1 x 10(-2) M and 30.9 mV/microM for 1 x 10(-3) M in the concentration of Fe(III)-Fe(II) in a potential buffer solution containing 0.35 M NaBr, 0.2% (NH4)6Mo7O24 and 1 M H2SO4. The detection limit of bromate obtained by a 1 x 10(-3) M Fe(III)-Fe(II) potential buffer solution was 0.02 microM (2.5 ppb). The numbers of repetitive determinations in which the relative sensitivities within 5% were regarded as being tolerated were ca. 4000 and 2000 for the use of only 100 ml of 1 x 10(-2) M and 1 x 10(-3) M Fe(III)-Fe(II) potential buffer solution, respectively.     

Photoinduced electron transfer of 5,10,15,20-tetraphenylporphyrinato zinc(II) at the polarized water/1,2-dichloroethane interface.

The photocurrent at the polarized water/1,2-dichloroethane (DCE) interface was successfully observed in the presence of a lipophilic sensitizer, 5,10,15,20-tetraphenylporphyrinato zinc (ZnTPP), in the organic phase. The photocurrent transient responses were apparently affected by the employed organic supporting electrolyte: tetrapenthylammonium tetraphenylborate (TPnATPB) or tris(tetraoctylammonium)tungstophosphate ((TOcA)3PW12O40). The photocurrent measured in the TPnATPB system exhibited rather slow responses associated with the ion transfer of photoproducts. On the other hand, the photoinduced heterogeneous electron transfer could be observed in the use of (TOcA)3PW12O40. The photocurrent intensity in the (TOcA)3PW12O40 system exhibited an apparent pH dependence and the photoreduction of hydrogen ions probably took place at the water/DCE interface. By analyzing the real and imaginary components of the photocurrent depending on the photoexcitation frequency, we roughly estimated the phenomenological rate constants of the product separation (k(ps)) and recombination (k(rec)) processes as log(k(ps)/s(-1)) = 1.5 +/- 0.2 and log(k(rec)/s(-1)) = 1.8 +/- 0.1, respectively.     

Lens Design: An Attempt to Use ‘Escape Function’ as a Tool in Global Optimization

In designing lenses with the damped least squares method, the solution obtained by optimization routine is a local minimum of the merit function. To get out of this and seek a different solution, we propose to use an ‘escape function’ as an additional operand of the lens system, to be controlled. Experiments were made on simple models of merit function and the advantage of this technique was ascertained. We also planted this algorithm into OSLO SIX (lens design software by Sinclair Optics) by means of CCL (C-compatible language) and applied it to actual lens design. Experiments convinced us that the method would be an effective tool for global optimization.     

Vertical Distribution of Particulate Mercury as Measured on a Meteorological Observation Tower (213m)

Abstract

The concentration of mercury in airborne particles was determined in samples collected at heights of 1m and at 175m up the Meteorological Observation Tower (213m) at the Meteorological Research Institute, Tsukuba between August 1985 and April 1986. The concentrations of particulate mercury at the two heights were compared with gaseous mercury levels at a height of 10m and with other chemical components in the particles. The concentrations of particulate mercury at both heights showed no positive correlation with those of gaseous mercury, total suspended particles, sulfate, chloride, sodium or calcium. However, there was some positive correlation between particulate mercury and nitrate concentrations especially at 175m; the concentrations of these components were found to be high when the wind direction was southwesterly. These results suggest that these components were transported from the Tokyo Metropolitan area.     

Synthesis and Self‐Assembly of NCN‐Pincer Pd‐Complex‐Bound Norvalines

The NCN‐pincer Pd‐complex‐bound norvalines Boc‐D /L ‐[PdCl(dpb)]Nva‐OMe ( 1 ) were synthesized in multigram quantities. The molecular structure and absolute configuration of 1 were unequivocally determined by single‐crystal X‐ray structure analysis. The robustness of 1 under acidic/basic conditions provides a wide range of N‐/C‐terminus convertibility based on the related synthetic transformations. Installation of a variety of functional groups into the N‐/C‐terminus of 1 was readily carried out through N‐Boc‐ or C‐methyl ester deprotection and subsequent condensations with carboxylic acids, R¹COOH, or amines, R²NH₂, to give the corresponding N‐/C‐functionalized norvalines R¹‐D /L ‐[PdCl(dpb)]Nva‐R² 2 – 9 . The dipeptide bearing two Pd units 10 was successfully synthesized through the condensation of C‐free 1 with N‐free 1 . The robustness of these Pd‐bound norvalines was adequately demonstrated by the preservation of the optical purity and Pd unit during the synthetic transformations. The lipophilic Pd‐bound norvalines L ‐ 2 , Boc‐L ‐[PdCl(dpb)]Nva‐NH‐n‐C₁₁H₂₃, and L ‐ 4 , n‐C₄H₉CO‐L ‐[PdCl(dpb)]Nva‐NH‐n‐C₁₁H₂₃, self‐assembled in aromatic solvents to afford supramolecular gels. The assembled structures in a thermodynamically stable single crystal of L ‐ 2 and kinetically stable supramolecular aggregates of L ‐ 2 were precisely elucidated by cryo‐TEM, WAX, SAXS, UV/Vis, IR analyses, and single‐crystal X‐ray crystallography. An antiparallel β‐sheet‐type aggregate consisting of an infinite one‐dimensional hydrogen‐bonding network of amide groups and π‐stacking of PdCl(dpb) moieties was observed in the supramolecular gel fiber of L ‐ 2 , even though discrete dimers are assembled through hydrogen bonding in the thermodynamically stable single crystal of L ‐ 2 . The disparate DSC profiles of the single crystal and xerogel of L ‐ 2 indicate different thermodynamics of the molecular assembly process.     

两例具有大磁滞的氰根桥联{Fe2ⅢNiⅡ}单链磁体

我们利用具有不同对称性的同分异构体,通过改变分子间氢键网络,操控单链磁体行为,成功合成了2 例化合物：[Ni^Ⅱ(L1)][Fe^Ⅲ(Tp)(CN)₃]₂·3.5H₂O (1)和[Ni^Ⅱ(L2)][Fe^Ⅲ(Tp)(CN)₃]₂·3H₂O (2),其中Tp=hydrotris(pyrazolyl)borate,L1=3,4-bis(1H-imid-azol-1-yl)thiophen,L2=1,2-bis(1H-imidazol-1-yl)thiophen)。磁性研究表明,1和2表现为具有不同矫顽场的单链磁体行为。1的矫顽场为8.41 kOe,而2的矫顽场为3.84 kOe。