Mediated amperometric biosensor for hypoxanthine based on a hydroxymethylferrocene-modified carbon paste electrode

An amperometric enzyme electrode for the determination of hypoxanthine in fish meat is described. The hypoxanthine sensor was prepared from xanthine oxidase immobilized by covalent binding to cellulose triacetate and a carbon paste electrode containing hydroxymethylferrocene. The xanthine oxidase membrane was retained behind a dialysis membrane at a carbon paste electrode. The sensor showed a current response to hypoxanthine due to the bioelectrocatalytic oxidation of hypoxanthine, in which hydroxymethyiferrocene served as an electron-transfer mediator. The limit of detection is 6 × 10^?7 M, the relative standard deviation is 2.8% (n=28) and the response is linear up to 7 × 10^?4 M. The sensor responded rapidly to a low hypoxanthine concentration (7 × 10^?4 M), the steady-state current response being achieved in less than 1 min, and was stable for more than 30 days at 5 ° C. Results for tuna samples showed good agreement with the value determined by the conventional method.     

Synthesis of potent beta-secretase inhibitors containing a hydroxyethylamine dipeptide isostere and their structure-activity relationship studies

Several beta-secretase inhibitors were designed based on hydroxyethylamine dipeptide isostere (HDI) structures and were synthesized by a methodology using the aza-Payne rearragement and O,N-acyl transfer reactions to study their structure-activity relationships. Among these pseudopeptides, effective compounds were developed as the first beta-secretase inhibitors containing the HDI transition state mimic with potent enzyme inhibitory activity (IC50 < 100 nM).     

Polymer-Supported dicyanoketene acetal as a pi-acid catalyst: monothioacetalization and carbon-carbon bond formation of acetals

Polymeric dicyanoketene acetals (DCKA) were synthesized by copolymerization of styrene and divinylbenzene or ethylene glycol dimethacrylate. These novel polymers could be used successfully as recyclable pi-acid catalysts in monothioacetalization or carbon-carbon bond forming reaction of acetals.     

Photometric determination of micro amounts of thiosulphate by means of its cyanolysis with lanthanum(III) as catalyst

Lanthanum(III) has been found to catalyse the reaction of thiosulphate with cyanide. The effects of pH, reaction time and temperature, amount of cyanide and lanthanum, and order of addition of reagents have been investigated. Temperature has little effect in the range 10–30°, but at both 35° and 40° the rate is noticeably faster. Reaction is complete at room temperature in 1.5 hr at pH 9.3–9.6, and in 3 hr at pH 9.1–9.6. The method can be applied to the determination of 1.0 × 10⁻⁵−6.0 × 10⁻⁴M thiosulphate, with a relative standard deviation of 0.3% for 4 × 10⁻⁴M thiosulphate.     

Evaluation of the radioactivity in concrete from accelerator facilities

For evaluation of radioactivity induced in the concrete samples from accelerator facilities, the residual radioactivity in concrete sample, collected from seven accelerator facilities, was determined by γ-ray spectrometry. The tritium was extracted by the heating method using an IR furnace, and measured with a liquid scintillation counter. It was found that the major radioisotopes activated mainly by neutrons in the concrete samples were ¹⁵²Eu, ⁶⁰Co, ¹³⁴Cs and ³H. The concentrations of radioactivities induced by thermal neutron capture are the highest at a depth of 10 cm in the concrete wall. The correlation between tritium, ⁶⁰Co and ¹⁵²Eu activity was investigated by measuring many concrete samples for seven accelerator facilities. The results indicate that their activities are strongly correlated with each other. So it would also be concluded that the total activity in shielding concrete could be estimated on the basis of the activities of ⁶⁰Co and ¹⁵²Eu.     

Novel ring transformation reactions of xanthine derivatives

The novel ring transformation reactions were found in the reactions of 1,3,7,9-tetra-alkyl-8,9-dihydroxanthines and acetylenic compounds. The reaction of the dihydroxanthine with DMAD gave a propellane type compound and with methyl propiolate afforded the similar type compound and a pyrimido[4,5-b]diazepine derivative. The mechanism of these reactions was also discussed.     

Interaction of pentoxifylline with human erythrocytes. III. Comparison of fluidity change of erythrocyte membrane caused by S-adenosyl-L-methionine with that by pentoxifylline

The change in fluidity by adding pentoxifylline to erythrocyte membranes was compared with that caused by S-adenosyl-L-methionine (SAM) by the method of electron spin resonance (ESR) spectroscopy. When SAM or pentoxifylline was added externally to the erythrocyte suspension (outside), the fluidity of the membrane bilayer was increased after incubation at 37 degrees C. However, the fluidity change in the inner part of the bilayer was relatively small compared to that in its outer part. These fluidity changes were dependent on the incubation time and the temperature. When the erythrocyte suspension was preincubated overnight at 4 degrees C in the presence of drugs (inside), the fluidity of the inner part of the membrane changed significantly. Nevertheless, that of the outer part of the lipid bilayer was not affected. Such an asymmetric fluidity change in the lipid bilayer was not observed by the addition of other xanthine derivatives such as caffeine, theophylline and theobromine. S-Adenosyl-L-homocysteine suppressed and MgCl2 enhanced the increase of the membrane fluidity by SAM or pentoxifylline. Furthermore, the effects of SAM and pentoxifylline on erythrocyte deformability were determined by a filtering technique method. In increasing order the additive effects of SAM and pentoxifylline on the erythrocyte filterability were SAM (outside) less than pentoxifylline (inside) less than pentoxifylline (outside) less than SAM (inside). These results suggest that pentoxifylline also affects the membrane fluidity through the enzymatic methylation of phospholipids.     

Synthesis, characterization and FET properties of novel dithiazolylbenzothiadiazole derivatives

Dithiazolylbenzothiadiazoles easily obtained have high electron affinity and the FET device of a trifluoromethylphenyl derivative exhibited a good n-type performance with high electron mobility.     

Determination of the change of nuclear charge radius of the119Sn Mössbauer transition by internal conversion

Radioactive¹¹⁹Sb was implanted into six host matrices (CaSnO₃, Pt, Y, Au,-Sn, Pb) and internal conversion electrons of the 23.87 keV transition in¹¹⁹Sn were measured with an iron-free magnetic spectrometer as well as Mössbauer spectra. In the analysis of the conversion spectra of outermost electrons, the overlapping K-LM Auger lines were subtracted using the Auger spectrum of tin measured with another source of^117mSn, and the shake-off effect accompanying the conversion process was considered. From the correlation between the Mössbauer isomer shifts and the intensity ratios of O-shell to N₁-shell conversion electrons, the change of the nuclear charge radius of the 23.87 keV transition of¹¹⁹Sn was deduced to be R/R=(0.87 ± 0.25) × 10^–4 for a uniform charge distribution ofR= 1.2 ×A ^1/3 fm or, equivalently, r²>—=(3.6 ± 1.0) ×10^–3 fm².