Measurement technique for depth profiling in time-domain low-coherence interferometer

A measurement technique for depth profiling in a time-domain low-coherence interferometer has been proposed. The spatial variation of the optical path caused by a diffraction grating in the Littrow configuration produces a white-light interferogram. A one-dimensional charge-coupled device (1D-CCD) detector is used to measure the undersampled white-light interferogram. The position of the reflective boundary is calculated from the rate of phase change with spatial frequency, which is based on the sub-Nyquist sampling of the white-light interferogram in the frequency domain.     

Ketonization of Secondary Hydroxy Groups of Alcohols and Diols with Hydrogen Peroxide Under the Influence of Tricetylpyridinium-12-Tungstophosphate

Molydbenum and tungsten-catalyzed oxidations of alcohols with dilute hydrogen peroxide under phase-transfer conditions have been focused in recent years 1–3. In a previous paper, we have reported that tricetylpyridinium-12-molybdophosphate(CMP), [π - C₅H₅N+(CH_{2 15}CH₃]₃ (PMO₁₂O₄₀)³-, prepared from 12-molybdophosphoric acid (MPA) and cetylpyridinium chloride (CPC), catalyzed the oxidation of secondary alcohols to carbonyl compounds with tert-butylhydroperoxide(t-BuOOH)⁴. When hydrogen peroxide in place of t-BuOOH was employed as the oxidant for the above oxidation, however, alcohols were oxidized with difficulty to give carbonyl compounds in poor yields. In continuation of this study, we wish to report here the selective oxidation of secondary hydroxy group of alcohols and diols and diols with H₂O₂ under the influence to tricetylpyridinium-12 tungstophosphate (CWP), [π-C₅H₅N+ (CH₂) 15 CH₃]₃(PW₁₂O₄₀)³-, derived from 12-tungstophosporic acid (WPA) and CPC.     

Thermal oxidative degradation of additive-free polypropylene pellets investigated by multichannel Fourier-transform chemiluminescence spectroscopy

Thermal oxidative degradation of additive-free polypropylene pellets heated isothermally in dry air at 150 and 180 °C (below and above the melting point of 163 °C) was investigated by multichannel Fourier-transform chemiluminescence spectroscopy. The initial peak wavelength of chemiluminescence emission at 490 nm remained constant during the early stages of thermal degradation, but new emissions developed with time in the red spectral region over an extended oxidation period. The time-dependent luminescence spectra were deconvoluted into three emission bands by least-squares fitting using Gaussian curves. We concluded that at least three groups of luminescent species (luminophores), having different conjugation lengths, were generated by thermal oxidation over extended periods and show luminescence around 490, 660, and 740 nm.     

Enhancing the Cellulose-Degrading Activity of Cellulolytic Bacteria CTL-6 (Clostridium thermocellum) by Co-Culture with Non-cellulolytic Bacteria W2-10 (Geobacillus sp.)

The effect of a non-cellulolytic bacterium W2-10 (Geobacillus sp.) on the cellulose-degrading activity of a cellulolytic bacterium CTL-6 (Clostridium thermocellum) was determined using cellulose materials (paper and straw) in peptone cellulose solution (PCS) medium under aerobic conditions. The results indicated that in the co-culture, addition of W2-10 resulted in a balanced medium pH, and may provide the required anaerobic environment for CTL-6. Overall, addition of W2-10 was beneficial to CTL-6 growth in the adverse environment of the PCS medium. In co-culture with W2-10, the CTL-6 cellulose degradation efficiency of filter paper and alkaline-treated wheat straw significantly increased up to 72.45 and 37.79 %, respectively. The CMCase activity and biomass of CTL-6 also increased from 0.23 U ml^?1 and 45.1 μg ml^?1 (DNA content) up to 0.47 U ml^?1 and 112.2 μg ml^?1, respectively. In addition, co-culture resulted in accumulation of acetate and propionate up to 4.26 and 2.76 mg ml^?1. This was a respective increase of 2.58 and 4.45 times, in comparison to the monoculture with CTL-6.     

Preparation of various Janus composite particles with two components differently combined

Janus composite particles with a combination of organic and inorganic substances were synthesized by soap-free emulsion polymerization in which an amphoteric initiator of 2,2′-azobis[N-(2-carboxyethyl)-2-2-methylpropionamidine] (VA-057) was employed to introduce a polystyrene (PSt) lobe onto silica cores surface-modified with 3-methacryloxypropyltrimethoxy silane (MPTMS). Thermogravimetric analysis and X-ray photoelectron spectroscopy were used to characterize the surface-modified silica particles and showed that a small amount of MPTMS introduced onto the surface of silica particles could successfully prepare SiO₂–PSt Janus particles. The oxide part of SiO₂–PSt Janus particles obtained with the polymerization was further surface-modified with 3-aminopropyltriethoxysilane (APS) to introduce positively charged amino groups on the silica surface. The silica surface modified with APS was covered with gold by electroless deposition in which a gold precursor of auric chloride was reduced with ascorbic acid in the presence of polyvinylpyrrolidone. The electroless deposition of gold successfully produced Janus particles with a combination of gold and PSt surfaces. Furthermore, dissolution of the polymer component of the Au–PSt Janus particles in tetrahydrofuran led to another Janus type of particles with an inorganic combination of Au and SiO₂.     

Development of a fluoride-responsive amide bond cleavage device that is potentially applicable to a traceable linker

A fluoride-responsive (FR) amino acid that induces amide bond cleavage upon the addition of a fluoride was developed, and it was applied to an FR traceable linker. By the use of an alkyne-containing peptide as a model of an alkynylated target protein of a bioactive compound, introduction of the FR traceable linker onto the peptide was achieved. Subsequent fluoride-induced cleavage of the linker followed by labeling of the released peptide derivative was also conducted to examine the potential applicability of the FR traceable linker to the enrichment and labeling of alkynylated target molecules.     

Synthesis of N-labeled 4-oxo-2,2,6,6-tetraethylpiperidine nitroxide for EPR brain imaging

A scalable synthetic route for ¹⁵N-labeled 4-oxo-2,2,6,6-tetraethylpiperidine nitroxide (¹⁵N-TEEPONE) is described. This ¹⁵N-labeled nitroxide is suitable for electron paramagnetic resonance imaging of brain, and its higher sensitivity compared with that of its ¹⁴N-counterpart is an important advantage of the labeled derivative.     

Electrochemical Fluorination of Dithiocarbonates Using a Triarylamine Mediator

Electrochemical oxidation of O-(4-chlorobenzyl) S-methyl dithiocarbonate using tris(2,4-dibromophenyl)amine as a redox mediator was studied by cyclic voltammetric measurements. The triarylamine mediated anodic fluorodesulfurization of O-(4-chlorobenzyl) and O-(4-bromobenzyl) S-methyl dithiocarbonates provided 4-chloro- and 4-bromobenzyl fluorides, respectively in moderate yields. On the other hand, similar anodic fluorination of O-(2-phenethyl) S-octyl dithiocarbonate and O-(4-bromophenyl) S-methyl dithiocarbonate afforded 2-phenethyl trifluoromethyl ether and difluoro(methylthio)methyl 4-bromophenyl ether, respectively. Mechanistic aspects are also discussed.     

Selective ablation of atherosclerotic lesions with less thermal damage by controlling the pulse structure of a quantum cascade laser in the 5.7-µm wavelength range

Cholesteryl esters are the main components of atherosclerotic plaques, and they have an absorption peak at the wavelength of 5.75 µm. To realize less-invasive ablation of the atherosclerotic plaques using a quasi-continuous wave (quasi-CW) quantum cascade laser (QCL), the thermal effects on normal vessels must be reduced. In this study, we attempted to reduce the thermal effects by controlling the pulse structure. The irradiation effects on rabbit atherosclerotic aortas using macro pulse irradiation (irradiation of pulses at intervals) and conventional quasi-CW irradiation were compared. The macro pulse width and the macro pulse interval were determined based on the thermal relaxation time of atherosclerotic and normal aortas in the oscillation wavelength of the QCL. The ablation depth increased and the coagulation width decreased using macro pulse irradiation. Moreover, difference in ablation depth between the atherosclerotic and normal rabbit aortas using macro pulse irradiation was confirmed. Therefore, the QCL in the 5.7-µm wavelength range with controlling the pulse structure was effective for less-invasive laser angioplasty.