Electrochemical properties of Li symmetric solid-state cell with NASICON-type solid electrolyte and electrodes

All-solid-state phosphate symmetric cells using Li₃V₂(PO₄)₃ for both the positive and negative electrodes with the phosphate Li_1.5Al_0.5Ge_1.5(PO₄)₃ as the solid electrolyte were proposed. Amorphous Li_1.5Al_0.5Ge_1.5(PO₄)₃ was added into the electrode to increase the interface area between the active materials and the electrolyte. Any other phases were not formed at the electrode/electrolyte interface even after hot pressing at 600 °C. The discharge capacity was 92 mAh g^? 1 at 22 µA cm^? 2 at 80 °C, and 38 mAh g^? 1 at 25 °C, respectively. Symmetric cell configuration leads to simplify the fabrication process for all-solid-state batteries and will reduce manufacturing costs.     

Perturbation theory analysis for electronic response of DNA base pairs

The electronic responses of duplex B-DNA sequences are investigated using perturbation theory analyses. The electronic polarizability and effective mass are computed for base pair doublets and triplets and the electronic structures are calculated according to density functional theory. High polarizability and a light effective mass are obtained in a sequence such as 5′-GGG-3′. The results indicate that the concentration of GC base pairs causes a high response of the electronic states, and molecular orbitals that are very responsive to the electric field tend to be reactive with other orbitals or conducting hole carriers. Furthermore, the interaction between the electronic states and a positively charged wavepacket is discussed, assuming hole injection in the DNA sequences. The sequence of 5′-GGG-3′ responds sensitively to the external hole approach, which is presumably injected to a guanine site.     

Synthesis and magnetic properties of ALnO2 (A=Cu or Ag; Ln=rare earths) with the delafossite structure

Synthesis, structures, and magnetic properties of ternary rare earth oxides ALnO₂ (A=Cu or Ag; Ln=rare earths) have been investigated. CuLnO₂ (Ln=La, Pr, Nd, Sm, Eu) were synthesized by the direct solid state reaction of Cu₂O and Ln₂O₃, and AgLnO₂ (Ln=Tm, Yb, Lu) were obtained by the cation-exchange reaction of NaLnO₂ and AgNO₃ in a KNO₃ flux. These compounds crystallized in the delafossite-type structure with the rhombohedral 3R type (space group: R-3m). Magnetic susceptibility measurements showed that these compounds are paramagnetic down to 1.8 K. Specific heat measurements down to 0.4 K indicated that CuNdO₂ ordered antiferromagnetically at 0.8 K.     

Layered silicate‐polyamide‐6 nanocomposites: Influence of silicate species on morphology and properties

The effect of two different species of layered silicates on the morphology, mechanical properties, and methanol vapor barrier properties of polyamide‐6 (PA6) nanocomposites was examined using identical experimental conditions for both species. The layered silicate species used were natural montmorillonite (MMT) and synthetic expandable fluoro‐mica (FM), the chemical compositions of which were Na_0.43(Al_1.56Mg_0.31Fe²⁺ _0.09)(Si_3.95Al_0.05)O₁₀(OH)₂ and Na_0.66Mg_2.68(Si_3.98Al_0.02)O₁₀F₂, respectively. The layered silicates were modified with a dodecylammonium salt (DDA) using an ion‐exchange method. The resulting organically modified layered silicates were melt‐kneaded with PA6 in a twin‐screw kneader at 260 °C. By quantitative analysis of the silicate layers dispersed in the PA6, the number‐average aspect ratio was estimated to be 76 for DDAMMT‐PA6 and 85 for DDAFM‐PA6. This confirmed that the primary particle size of the initial silicate did affect the aspect ratio. The rigidity and gas barrier properties of the nanocomposites appeared to depend upon the morphology of the nanocomposite. On the other hand, the elongation at break of the nanocomposites decreased as the amount of silicate increased. This reduction in ductility was ascribed to the difference in morphology of the nanocomposites, that is, distribution of silicate nanolayers in the polymer matrix. The homogeneity of the particle fraction of exfoliated nanolayers was clearly an important factor affecting the properties of the nanocomposites. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 583–595, 2009     

Structure and morphology of the aliphatic polyester poly(δ‐valerolactone) in solution‐grown,chain‐folded lamellar crystals

Poly(δ‐valerolactone) (PVL) crystals in the form of chain‐folded lamellae were prepared by isothermal crystallization from a 2‐methylbutane‐2‐ol solution. Wide‐angle and small‐angle X‐ray diffraction data, obtained from PVL lamellae sedimented to form oriented mats, were supplemented with morphological and structural data from electron microscopy, both imaging and diffraction. The diffraction signals index on an orthorhombic unit cell with the parameters a = 0.747 ± 0.002 nm, b = 0.502 ± 0.002 nm, and c (chain axis) = 0.742 ± 0.002 nm. Similar unit cell parameters were obtained from crystals grown from 1‐octanol and also from drawn melt‐pressed films. The evidence supports a model containing two antiparallel chain segments in the unit cell. The c value of 0.742 nm is appropriate for an all‐trans or onefold helical backbone conformation for the straight stems. Possible slight perturbations at the ester units from the all‐trans backbone conformation are discussed. Computerized modeling was used to optimize the adjacent‐reentry folded structure. The setting angles, with respect to the a axis, are ±58° for the corner and center chains. The lamellae are 7.26 ± 0.05 nm thick, and the chains run orthogonal to the lamellar surface. The chains fold in the diagonal (110) and (11¯0) planes in an alternating fashion. The X‐ray diffraction data suggest that a proportion of adjacent paired antiparallel entities, or hairpin units, are c‐axis‐sheared, and a relationship to the results obtained from drawn films is discussed. A brief comparison is also made with related polymer structures. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2622–2634, 2001     

Laser Trimming for Adjustment of Grating Offset in Phase-Shifted Fiber Grating Coupler for All-Optical Switching Application

We theoretically investigated laser trimming to adjust grating offset in phase-shifted fiber grating coupler (FGC) for all-optical switching application. It was clarified that the trimming made the extinction ratio higher in all-optical FGC switch.