Novel Biodegradable Copolymers with a Periodic Sequence Structure Derived from Succinate Butan‐1,4‐diol,and Butan‐1,4‐diamine

Summary: Novel biodegradable copolymers derived from succinate, butan‐1,4‐diol, and butan‐1,4‐diamine were synthesized by two‐step polycondensation reactions. The obtained copolymers had a periodical‐sequence structure consisting of ester and amide units, and the melting temperatures of the periodic copolymers increased with an increase in amide content. The crystalline structure of the periodic copolymers differs from that of butylene succinate homopolymer (PBS), and these results suggest that the periodically introduced amide units are included in the crystalline phase forming a novel crystalline structure.

Periodic copolyester‐amides derived from succinate, butane‐1,4‐diol, and butan‐1,4‐diamine     

Development of Submillimeter Wave Catheter Transmitting a Gyrotron Output for Irradiation on Living Bodies

The development of a millimeter and submillimeter wave catheter for irradiation on living bodies using a gyrotron as the radiation power source is described. The GYROTRON FU-IV, optimized for such applications was used in the development. It was operated in both CW and pulsed regime at TE₀₃ and TE₃₂ modes with frequencies 302 GHz and 238 GHz respectively. Irradiation tests were made on thermal papers, beefs and liver of living rats.     

Evident solvent effect on propagation reactions during radical copolymerization of maleimide and alkene

The radical copolymerization of N-(2,6-dimethylphenyl)maleimide (DMPhMI) and 2,4,4-trimethylpentene (TP) was investigated in several solvents at 60°C. The copolymerization rate and the molecular weight of the resulting copolymers were dependent on the kind of solvent used. It was also revealed that the monomer reactivity ratios depended on the solvent; r₁ = 0.086 and r₂ = 0 in chloroform and r₁ = 0.25 and r₂ = 0 in benzene, where DMPhMI and TP are M₁ and M₂, respectively. The propagation rate constants were determined for the homopolymerization and copolymerization in chloroform and benzene using electron spin resonance spectroscopy. The homo- and crosspropagation rate constants (k₁₁ and k₁₂, respectively) were revealed to depend on the solvent: k₁₁ is 20 and 37 L/mol·s and k₁₂ is 230 and 150 L/mol·s in chloroform and in benzene, respectively. The interaction between the maleimide moiety and the solvent molecules was discussed based on the acceptivity of the solvents. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1515–1525, 1997     

OCTA (Open Computational Tool for Advanced material technology)

OCTA (Open Computational Tool for Advanced material technology) is an integrated simulation system for polymeric materials developed by a joint project of industry and academia supported by Japanese government. It aims at exploring the utility of mesoscale modelings developed in polymer science. OCTA consists of four simulation engines (molecular dynamics engine, rheology engine, interface engine, multi-phase engine) and a simulation platform. The system is designed to be open and extendable: all programs and source codes can be downloaded at http://octa.jp.     

Anionic Sublattices in Halide Solid Electrolytes: A Case Study with the High-Pressure Phase of Li3ScCl6

The Li₃MX₆ compounds (M=Sc, Y, In; X=Cl, Br) are known as promising ionic conductors due to their compatibility with typical metal oxide cathode materials. In this study, we have successfully synthesized γ-Li₃ScCl₆ using high pressure for the first time in this family. Structural analysis revealed that the high-pressure polymorph crystallizes in the polar and chiral space group P6₃mc with hexagonal close-packing (hcp) of anions, unlike the ambient-pressure α-Li₃ScCl₆ and its spinel analog with cubic closed packing (ccp) of anions. Investigation of the known Li₃MX₆ family further revealed that the cation/anion radius ratio, r_M/r_X, is the factor that determines which anion sublattice is formed and that in γ-Li₃ScCl₆, the difference in compressibility between Sc and Cl exceeds the ccp r_M/r_X threshold under pressure, enabling the ccp-to-hcp conversion. Electrochemical tests of γ-Li₃ScCl₆ demonstrate improved electrochemical reduction stability. These findings open up new avenues and design principles for lithium solid electrolytes, enabling routes for materials exploration and tuning electrochemical stability without compositional changes or the use of coatings.     

Coherence effect on decryption characteristics in message modulation type chaos secure communication systems using fiber-optic ring resonators

We numerically investigated the dependence of the decryption characteristics in a message modulation type chaos secure communication system using optical fiber ring resonators (OFRRs) on the coherence condition of carrier light. Since the output dynamics of OFRRs were formed on the basis of interference phenomenon among the circulated components in OFRRs, the coherence condition of input light affected inherently the OFRR output dynamics, resulting in the decryption characteristics. It was found that the decryption characteristics degraded as coherence length increased, i.e., as the spectral width of the input light decreased. The decryption characteristics also grew worse as the parameter differences between the transmitter and the receiver became larger.     

Stereoselective one-pot three-component coupling approach towards the synthesis of the AC ring system of taxanes

The stereoselective one-pot three-component coupling reaction was accomplished by 1,4-addition of the protected cyanohydrin ether 9f to cyclohexenone 10g and subsequent addition of the resulting enolate to formaldehyde in high yield for the formation of the AC ring system of taxanes. We found that the bulky substituents at the 10-position in the A ring prevent the desired 1,4-addition. Similarly, the bulky trialkylsiloxy groups at the 4-position in the C ring prevent the 1,4-addition and electron-donating alkoxy groups at the same position induce the undesired retro-Michael reaction.     

H NMR aided elucidation of products derived from photodegradation of ethyl 3-azido-4,6-difluorobenzoate in 2,2,2-trifluoroethanol

The major products formed upon photolysis of ethyl 3-azido-4,6-difluorobenzoate in 2,2,2-trifluoroethanol-d₃ has been elucidated by ¹H NMR analysis of the product mixture. Among the products formed and structurally elucidated was a hitherto unreported product formed during photolysis of aryl azides, namely azoxybenzene 19. The structural assignments of the major components of the reaction mixture were aided by comparison with ¹H NMR data from synthetic reference materials and compound isolation. MS, MS/MS, and HPLC analysis as well as UV spectroscopy was also employed in order to confirm and aid the structural analysis.     

Potential-modulated fluorescence spectroscopy of the membrane potential-sensitive dye di-4-ANEPPS at the 1,2-dichloroethane/water interface

The spectrofluorometric behavior of a membrane potential-sensitive dye, 1-(3-sulfonatopropyl)-4-[β-{2-(di-N-butylamino)-6-naphthyl}vinyl]pyridinium betaine (di-4-ANEPPS), at the polarized 1,2-dichloroethane/water interface was studied by means of potential-modulated fluorescence (PMF) spectroscopy. The results, combined with those from cyclic and alternating current voltammetry, clearly suggested that the dye adsorbed at the interface underwent a reorientation with increasing the interfacial potential, giving a well-developed PMF response as well as a voltammetric response. In addition to the PMF response, another PMF response was observed by addition of dilauroyl phosphatidylcholine (DLPC). This additional response was well explained in terms of a reorientation of di-4-ANEPPS at the interface, which would be induced by the potential-dependent desorption of DLPC from the interface. Thus, the present study supported the reorientation/solvatochromic mechanism for the membrane potential-sensitive dye rather than the electrochromic mechanism.     

Molecular weight characterization of poly[(R)-3-hydroxybutyrate] synthesized by genetically engineered strains of Escherichia coli

This study investigated the relationship of growth conditions, host strains and molecular weights of poly[(R)-3-hydroxybutyrate] [P(3HB)] synthesized by genetically engineered Escherichia coli. Various PHA synthases belonging to types I-IV enzymes were expressed in E. coli JM109 under the same experimental conditions, and the molecular weights of the polymers were characterized by gel permeation chromatography. The results demonstrate that P(3HB) polymers have varied molecular weights and polydispersities dependent on the characteristics of the individual PHA synthase employed. P(3HB) with high number-average molecular weights (M_n) [(1.5-4.0) × 10⁶] and narrow polydispersities (1.6-1.8) were synthesized by PHA synthases from Ralstonia eutropha (type I), Delftia acidovorans (type I) and Allochromatium vinosum (type III). Contrary to these, P(3HB) with relatively low M_n [(0.17-0.79) × 10⁶] and broad polydispersities (2.2-9.0) were synthesized by PHA synthases from Aeromonas caviae (type I), Pseudomonas sp. 61-3 (type II) and Bacillus sp. INT005 (type IV). Furthermore, the molecular weights of P(3HB) synthesized under various culture conditions, in various hosts of E. coli and by mutants of PHA synthase were characterized. It was found that, in addition to culture pH [Kusaka et al. Appl Microbiol Biotechnol 1997;47:140], other variances such as culture temperature, host strain and use of mutants are effective in changing polymer molecular weight.