A new synthetic route to 2-substituted naphtho[2,3-b]furan-4,9-dione2-Substituted Naphtho[2,3-b]furan-4,9-dione

4,9-Dimethoxynaphtho[2,3-b]furan 9 was obtained in 91% yield via the reductive methylation of naphtho[2,3-b]furan-4,9-dione 2 . After treatment of 9 with butyllithium, the mixture was allowed to react with N,N-dimethylacetamide, followed by oxidization with cerium(IV) diammonium nitrate to give 2-acetylnaphtho[2,3-b]furan-4,9-dione 1 . 2-Formylnaphtho[2,3-b]furan-4,9-dione 13 and 2-trimethylsilyl-naphtho[2,3-b]furan-4,9-dione 14 were also obtained from 9 by a similar method. The halodesilylations of 14 easily gave 2-iodonaphtho[2,3-b]furan-4,9-dione 16 , 2-bromonaphtho[2,3-b]furan-4,9-dione 17 , and 2-chloronaphtho[2,3-b]furan-4,9-dione 18 in 82%, and 93% and 83% yield, respectively. Furthermore, the nitrodesilylation of 14 gave 2-nitronaphtho[2,3-b]furan-4,9-dione 3 in 77% yield.     

Efficient construction of the hexacyclic ring core of palau'amine: the pKa concept for proceeding with unfavorable equilibrium reactions

Palau''amine has received a great deal of attention as an attractive synthetic target due to its intriguing molecular architecture and significant immunosuppressive activity, and we achieved its total synthesis in 2015. However, the synthesized palau''amine has not been readily applicable to the mechanistic study of immunosuppressive activity, because it requires 45 longest linear steps from a commercially available compound. Here, we report the short-step construction of the ABCDEF hexacyclic ring core of palau''amine. The construction of the CDE tricyclic ring core in a single step is achieved by our pK_a concept for proceeding with unfavorable equilibrium reactions, and a palau''amine analog without the aminomethyl and chloride groups is synthesized in 20 longest linear steps from the same starting material. The palau''amine analog is confirmed to retain the immunosuppressive activity. The present synthetic approach for a palau''amine analog has the potential for use in the development of palau''amine probes for mechanistic elucidation.

A palau''amine analog (2) was synthesized from 2-cyclopentenone in 20 steps. The construction of the CDE tricyclic ring core in a single step is achieved by our pK_a concept for proceeding with the unfavorable equilibrium reactions.     

Pi-face-selective Diels-Alder reactions of 3,4-di-tert-butylthiophene 1-oxide and 1-imide and formation of 1,2-thiazetidines

3,4-Di-tert-butylthiophene 1-oxide (1a) reacted with a series of electron-deficient alkenic dienophiles at its syn-pi-face relating to the S=O bond to give [4+2] adducts in excellent yields. The 1-oxide 1a also reacted even with angle-strained dienophiles acenaphthylene and norbornene at its syn-pi-face to afford [4+2] adducts; in the latter case, norbornene reacted exclusively at its exo-pi-face. The oxide 1a reacted with dimethyl acetylenedicarboxylate to produce dimethyl 4,5-di-tert-butylphthalate in high yield with spontaneous extrusion of SO from the initial adduct even at room temperature. Similarly, 3,4-di-tert-butylthiophene 1-(p-toluenesulfonyl)imide (3a) reacted with alkenic dienophiles at its syn-pi-face relating to the S=N bond to give [4+2] adducts in good yields. The reaction of 3a with 4-phenyl-1,2,4-triazoline-3,5-dione (PTAD) afforded a 1,2-thiazetidine 12a, the first example of S-unoxidized 1,2-thiazetidine, in good yield, through rearrangement of the initial [4+2] adduct. The molecular structure of 12a is discussed on the basis of the X-ray crystallographic analysis. Comparison of the foregoing reactions leads to the conclusion that the 1-oxide 1a is more reactive as a diene than the 1-imide 3a, which is more reactive than 3,4-di-tert-butylthiophene 1,1-dioxide. The origin of the syn-pi-face selectivities of 1a and 3a in Diels-Alder reactions is discussed in terms of the orbital mixing rule and steric effect and also based on B3LYP/6-31G(d) calculations.     

Strain analysis of Si by FEM and energy-filtering CBED.

Lattice strains around a platelet oxygen precipitate in Si wafer is studied by energy filtering convergent-beam electron diffraction (CBED) and calculations based on the finite element method (FEM). Local lattice strains are measured from CBD patterns obtained with a probe size less than 2 nm in a specimen thicker than 450 nm. Strains measured are compressive along a direction normal to a plate of the precipitation and tensile along a direction parallel to the plate. Two-dimensional stress fields near the precipitate are obtained with FEM computer analyses by fitting the measured strains. It appears that shear stresses are concentrated at the end of the precipitate edge and the maximum shear stress at an interface between the precipitate and the Si-matrix is 1.9 GPa. It is demonstrated that a combination of the energy filtering CBED and FEM is very useful for the study of local strains near interfaces in semiconductor devices, in particular for the study of stress fields that are too steep for application of the conventional CBED technique.     

A novel and efficient oxidative biaryl coupling reaction of phenol ether derivatives using a combination of hypervalent iodine(III) reagent and heteropoly acid

A novel and efficient oxidative biaryl coupling reaction of phenol ether derivatives using a combination of hypervalent iodine(III) reagent, phenyliodine(III) bis(trifluoroacetate) (PIFA), and heteropoly acid has been developed.     

One-pot synthesis of tropinone by tandem (domino) ene-type reactions of acetone silyl enol ethers

A synthetic approach for tropane alkaloids on the basis of tandem (domino) ene-type reactions of acetone silyl enol ethers with iminium ions is shown to be triggered by intermolecular ene-type reactions followed by 6-(2,5) silatropic ene-type cyclizations.     

Semiempirical calculation of electronic spectra of organic compounds by using the improved method of new-γ electron repulsion integral. Part 2. Polycyclic aromatic hydrocarbons (PAHs)

Excitation energies of 123 polycyclic aromatic hydrocarbons were calculated by incorporating the improved method of new-γ for the two-center electron repulsion integral into two semiempirical molecular orbital methods (CNDO/S and INDO/S). This variable method well reproduced experimental excitation energies of them. The average error of the improvement is about 0.162 (CNDO/S) or 0.237 eV (INDO/S) though the average error without the improvement is about 0.541 (CNDO/S) or 0.536 eV (INDO/S). The improvement was useful for the calculations of other organic compounds including hetero atoms, such as organic dye.     

Structures and cytotoxic activity relationship of casearins, new clerodane diterpenes from Casearia sylvestris Sw

Casearins G-R, new cytotoxic clerodane diterpenes have been isolated from the leaves of Casearia sylvestris Sw. (Flacourtiaceae). Their structures have been elucidated by spectroscopic methods and chemical conversions, and their structure-activity relationships have been discussed.     

A new synthetic method for β-trimethylsilyl-α,β-unsaturated carbonyl compounds employing 1-methoxy-3-phenylthio-3-trimethylsilyl-1-propene

A new synthetic method for functionally substituted β-trimethylsilyl-α,β-unsaturated carbonyl compounds from 1-methoxy-3-phenylthio-3-trimethylsilyl-1-propene is described.     

Crystal structures and topochemical polymerizations of 7,7,8,8-tetrakis(alkoxycarbonyl)quinodimethanes

Highly conjugated monomers, 7,7,8,8-tetrakis(alkoxycarbonyl)quinodimethanes (methoxy (1a), ethoxy (1b), isopropoxy (1c), benzyloxy (1d), chloroethoxy (1e), and bromoethoxy (1f)), were synthesized. Recrystallizations of 1a, 1c, 1e, and 1f yielded two crystal forms (prisms (1a-A) and needles (1a-B), needles (1c-A) and plates (1c-B), prisms (1e-A) and plates (1e-B), and prisms (1f-A) and needles (1f-B)), which have different molecular packing modes by X-ray crystal structure analysis, indicating that the crystals are polymorphic. In the photopolymerizations of these monomer crystals in the solid state, 1a-A, 1e-A, and 1f-A polymerized topochemically to give crystalline polymers. For their thermal polymerizations in the solid state, in addition to 1a-A, 1e-A, and 1f-A, 1e-B and 1f-B polymerized, but polymers formed from the 1e-B and 1f-B were amorphous. The packing of quinodimethane molecules in the crystals was defined by four kinds of parameters, stacking distance (d(s)), the distance between the reacting exomethylene carbon atoms (d(cc)), the angles formed between the stacking axis and longer axis of the monomer molecule (theta(1)), and the shorter axis of the monomer molecule (theta(2)), and then the polymerization reactivity of these quinodimethanes in the solid state was discussed on the basis of these parameters.