Bifunctional organocatalysts for enantioselective aza-Morita-Baylis-Hillman reaction

The efficient and novel bifunctional organocatalyst for the enantioselective aza-Morita-Baylis-Hillman (aza-MBH) reaction has been established with (S)-3-(N-isopropyl-N-3-pyridinylaminomethyl)BINOL for the first time. The reaction proved to be deeply influenced by the position of the Lewis base attached to BINOL. The acid-base-mediated functionalities for the activation of the substrate and the fixing of conformation of the organocatalyst are harmoniously performed to promote the reaction with high enantiocontrol.     

Preparation of dry powder inhalation with lactose carrier particles surface-coated using a Wurster fluidized bed

An attempt was made to produce carrier particles for dry powder inhalation with lactose carrier particles surface-coated using a Wurster fluidized bed. The lactose carrier particles were coated with lactose aqueous solution containing hydroxypropyl methyl cellulose (HPMC) as a binder using a Wurster coating apparatus. Drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers under various particle surface conditions. These powder mixtures were aerosolized by a Jethaler((R)), and the in vitro deposition properties of salbutamol sulfate were evaluated by a twin impinger. The in vitro inhalation properties of the powder mixture prepared using the coated lactose carrier differed significantly compared with those of the powder mixture prepared using the uncoated lactose carrier, indicating improvements in in vitro inhalation properties of sulbutamol sulfate. In vitro inhalation properties increased with the surface coating time. This surface coating system would thus be valuable for increasing the in vitro inhalation properties of dry powder inhalation with lactose carrier particles.     

Conformational peculiarities of alcohols incorporated in lyotropic and thermotropic liquid crystals

Conformational characteristics of 1-butanol incorporated not only in hexagonal and lamellar aggregates formed by a lyotropic liquid crystal composed of sodium octanoate, 1-butanol, and water but also in a thermotropic liquid crystal, 4'-methoxybenzylidene-4-n-butylaniline (MBBA), have been investigated from 2H NMR quadrupolar splittings of the perdeuterated and partially deuterated compounds. In the lyotropic phases, 1-butanol shows strong trans preferences and renders itself extended, and octanoate decreases the trans fraction toward the methyl terminal to fill the inner space of the aggregate on behalf of 1-butanol. In MBBA, 1-butanol prefers globular conformations. This tendency was also indicated from the phase behaviors of 1-butanol/MBBA and 1-decanol/MBBA systems. In the nematic field, two successive C-C bonds of 1-butanol mostly adopt g+/-g+/- conformations, which are formed in the vicinity of the headgroup of 1-decanol in the lamella of the sodium octanoate/1-decanol/water system. A large degree ofconformational freedom near the hydroxyl group of alcohols, being shown by ab initio molecular orbital calculations at the Gaussian-2 level, permits them to change conformation for each environment.     

Amplification of chirality from molecules into morphology of crystals through molecular recognition

We have found a novel type of morphological chiral tuning on inorganic helical crystals through stereochemical recognition of organic molecules. Helical forms consisting of twisted twins emerged from triclinic crystals under diffusion-limited conditions. The proportion of the right- and left-handed helices was precisely tuned with the addition of a specified amount of chiral molecules, such as d- and l-glutamic acids. The chiral molecules recognized the enantiomeric surface of the triclinic crystal and then changed the growth behavior of the helical morphology. As a result, the microscopic chiral information, at a molecular level, was amplified into the macroscopic helices consisting of inorganic achiral components.     

Proposed mechanism for the reaction catalyzed by a diterpene cyclase,aphidicolan-16beta-ol synthase: experimental results on biomimetic cyclization and examination of the cyclization pathway by ab initio calculations

To examine the mechanism of the cyclization reaction catalyzed by aphidicolan-16beta-ol synthase (ACS), which is a key enzyme in the biosynthesis of diterpene aphidicolin, a specific inhibitor of DNA polymerase alpha, skeletal rearrangement of 2a and biomimetic cyclization of 4b were employed. The structures of the reaction products, which reflect penultimate cation intermediates, allowed us to propose a detailed reaction pathway for the Lewis acid-catalyzed cyclizations and rearrangements. Isolation of these products in an aphidicolin-producing fungus led us to speculate that the mechanism of the ACS-catalyzed cyclization reaction is the same as that of a nonenzymatic reaction. Ab initio calculations of the acid-catalyzed reaction intermediates and the transition states indicate that the overall reaction catalyzed by ACS is an exothermic process though the reaction proceeds via an energetically disfavored secondary cation-like transition state. In conjunction with the solvent effect in the acid-catalyzed reactions, this indicates that the actual role of ACS is to provide a template which enforces conformations of the intermediate cations leading to the productive cyclization although it has been believed that the cation-pi interaction between cation intermediates and aromatic amino acid residues in the active site is important for the enzymatic catalysis. This study provided important information on the role of various cationic species, especially secondary cation-like structures, in both nonenzymatic and enzymatic reactions.     

Pre-fibrillation of pulps to manufacture cellulose nanofiber-reinforced high-density polyethylene using the dry pulp direct kneading method

The dry pulp direct kneading method is an industrially viable, low-energy process for manufacturing cellulose nanofiber (CNF)-reinforced polymer composites, where the chemically modified pulps are nanofibrillated and uniformly dispersed in the polymer matrix during melt compounding. In the present study, cellulose fibers of various sizes ranging from surface-fibrillated pulps (20 μm in width) to fine CNFs (20 nm in width) were prepared from softwood bleached kraft pulps using a refiner and a high-pressure homogenizer. These cellulose fibers were modified with alkenyl succinic anhydride and dried. The dried fibers were used as a feed material for melt compounding in the dry pulp direct kneading method to fabricate CNF-reinforced high-density polyethylene (HDPE). When surface-fibrillated pulps were employed as a feed material, the pulps were nanofibrillated and dispersed uniformly in the HDPE matrix during melt compounding. The resulting composites had much better properties—i.e., much higher tensile modulus and strength values, and much lower coefficient of thermal expansion values—than the composites produced using pulps without pre-fibrillation. However, when CNFs were used as a feed material, they were shortened and agglomerated during melt compounding, and the properties of the composites consequently deteriorated. The study concludes that surface-fibrillated pulp, which can be produced cost-effectively using a refiner on an industrial scale, is more suitable as a feed material than CNFs for melt compounding in the dry pulp direct kneading method. This finding enables the elimination of a preliminary step in the preparation of CNFs from pulps, which is a time-consuming and energy-intensive process.

Graphical abstract

     

Aromatic Radical Anions with Parallel or Crossed Triple Bonds

Proton hyperfine data are reported for the radical anions of 1,8-di (propyn-1-yl)-naphthalene (I), 7,8,12,13-tetradehydro-10,11-dihydro-9H-cyclodeca[d,e]naphthalene (II) and 2,2′-di(propyn-1-yl)-biphenyl (III), as well as of 5,6,11,12-tetradehydro-7,8,9,10-tetrahydro-dibenzo[a,c]cyclodecene (IV) and its 8,8,9,9-tetradeuterio-derivative (IV-d₄). The triple bonds in I and II can be regarded as roughly parallel, while those in IV (and IV-d₄) may be considered as crossed. The π-spin distributions in I? to IV? are discussed in terms of simple MO models which suggest a weekly bonding interaction between the acetylenic fragments in IV?, in contrast to III? where such an effect appears to be negligible. The importance of an analogous interaction in I? and II? is difficult to deduce, since its inclusion into a MO model does not substantially affect the π-spin distribution in these radical anions.     

Polymerization of cyclic derivatives of uracil and thymine

Cyclic derivatives of uracil and thymine were synthesized from their corresponding 1-(2′-chloroethyl) derivatives by dehydrochlorination. These compounds were found to undergo a variety of reactions, giving many valuable derivatives of uracil and thymine. The cyclic derivatives, as monomers, were polymerized with a cationic initiator by a unique ring-opening process. The polymerization proceeded by ring opening with isomerization of the pyrimidine ring to give a polymer in which pyrimidine rings were connected with ethylene between N-1 and N-3 or O-4 in the pyrimidine ring. The structure of these polymers was determined by nuclear magnetic resonance (NMR), ultraviolet (UV), infrared (IR), and mass spectra. The structure was affected by polymerization temperature.     

Voltammetry at partially covered electrodes: Part III. Faradaic impedance measurements at model electrodes

Faradaic, impedances at model electrodes partially covered with a photoresist layer have been studied theoretically and experimentally. Equations for the faradaic impedance are derived based on the theoretical model and approach described in Part I of this series of papers. Experimental data for the hexacyanoferrate system at various model electrodes give excellent agreement, with theoretical predictions for the diffusion impedance behavior, and the applicability of the derived equations to the estimation of the degree of coverage and the size of the active regions is confirmed. Furthermore, the application of such model electrodes to the kinetic study of electrode reactions with high heterogeneous charge transfer rates is suggested.     

Electronic and ionic transports for negative charge carriers in smectic liquid crystalline photoconductor

We have investigated negative charge carrier transport in the smectic mesophases of the 2-phenylnaphthalene derivative, 6-(4'-octylphenyl)-2-dodecyloxynaphthalene (8-PNP-O12), using the time-of-flight (TOF) method. We revealed that the negative charge carrier transport in its smectic mesophases had two different mechanisms, i.e., electronic and ionic conductions: we observed two transits of the carriers in both the smectic A (SmA) and smectic B (SmB) phases and demonstrated their origins by dilution experiments with a hydrocarbon (n-dodecane); the fast transit was attributed to the electronic transport of electrons and the slow one to the ionic transport of negative ions. Furthermore, it was clarified that the ionic transport was caused by small amounts of chemical impurities ionized by trapping photogenerated electrons in 8-PNP-O12 in addition to photoinduced autoionization of the impurities. Furthermore, we determined the trapping lifetimes for electrons to be 140 and 24 mus for the SmA and SmB phases, respectively. The experimental results suggest the coexistence of two distinctive transport channels for these charge carriers in the smectic mesophases.