A molecular-beam study of the collision dynamics of methane and ethane upon a graphitic monolayer on Pt(111)

Utilizing a supersonic molecular-beam scattering technique, the angular intensity distributions of alkane molecules (CH4 and C2H6) have been measured, which are scattered from a chemically inert and highly oriented monolayer graphite (MG) on Pt(111). A MG which covers the Pt(111) surface with a full monolayer is found to induce a large energy loss of alkanes during collision with the surface by phonon creation due to the large mass ratio of an alkane molecule with respect to MG. Based on the classical cube model, only applicable to the molecules without internal mode excitation, the effective masses of MG of 76 (six atoms of carbon) and Pt(111) of 585 (three atoms of platinum) are determined from rare-gas atom scattering data. Despite the difference in the degree of freedom between CH4 and rare-gas atoms, CH4 scattering is found to be well described by the simple hard-cube model as a result of the high symmetry of the CH4 structure. With the recently developed ellipsoid-washboard model, an extension of the hard-cube model to include some internal mode excitation of impinging molecules in addition to the surface corrugation, it is found that unlike CH4 the cartwheel rotation mode of C2H6 is significantly excited during collision, while the helicopter mode excitation is negligible on a flat MG surface.     

Pyrolysis reaction of carpronium chloride and its structurally related compounds. 2—a mass spectrometric study of the lactonization mechanism

The mechanism of the pyrolysis reaction of carpronium chloride [(CH₃)₃N⁺? (CH₂)₃? COOCH₃CI^?] leading to γ-butyrolactone and tetramethylammonium chloride was investigated by means of thermal analysis, pyrolysis gas chromatography mass spectrometry and field desorption mass spectrometry, using deuterium labelling. The results indicated that carpronium chloride pyrolysed to yield equimolar amounts of γ-butyrolactone and tetramethylammonium chloride, methyl transfer occurred between N and O during the pyrolysis process. The mechanism is discussed on the basis of the experimental results, and with the aid of the theoretical results calculated by the CNDO/2 method. The mechanism presented is as follows. γ-Butyrolactone is formed by the intramolecular migration of the π-orbital of C?O to the carbon adjacent to [(CH₃)₃N]⁺ via a 5-membered ring transition state, accompanied by a bimolecular reaction between [(CH₃)₃N]⁺ and the CH₃ of O? CH₃, resulting in the formation of tetramethylammonium chloride in an amount equimolar with γ-butyrolactone.     

Catalytic specificity exhibited by p-sulfonatocalix[n]arenes in the methanolysis of N-acetyl-l-amino acids

Specific acid catalysis of p-sulfonatocalix[n]arenes (n = 4, Calix-S4; n = 6, Calix-S6; n = 8, Calix-S8) was observed in the alcoholysis of N-acetyl-l-amino acids in methanol. The methanolysis rates of basic amino acid substrates (His, Lys, and Arg) were markedly enhanced in the presence of Calix-Sn, as compared with rates observed with p-hydroxybenzenesulfonic acid (pHBS), which is a noncyclic analogue of Calix-Sn. This catalytic effect of Calix-Sn was not observed for the methanolysis of Phe, Tyr, and Trp substrates. On the other hand, (1)H NMR experiments following the effect of Calix-Sn on N-acetyl-l-amino acid substrates in CD(3)OD showed that the spectrum of a mixture of the His substrate with Calix-Sn was significantly different from the combined spectra of the respective compounds. These changes in spectra support the formation of an inclusion complex of Calix-Sn with basic amino acids. Furthermore, it was obvious that methanolysis of the His substrate catalyzed by Calix-S4 and Calix-S6 obeyed Michaelis-Menten kinetics. These results indicate that the catalytic activity of Calix-Sn originates from its forming a complex with specific substrates (basic amino acids), similar to enzymatic reactions.     

KINETICS AND MECHANISM OF PHOTOCYCLOADDITION OF DEOXYURIDINES TO 2,3-DIMETHYL-2-BUTENE

The mechanism of photocycloaddition of 2′-deoxyuridine (1a) and thymidine (1b) to 2,3-dimethyl-2-butene (Bu) in acetonitrile by UV irradiation has been studied. The reciprocal quantum yield for the cycloaddition increased linearly with reciprocal concentrations of Bu in acetonitrile to give limiting quantum yields at infinite concentration of Bu as 0.030 and 0.0096 for 1a and 1b , respectively. This shows that the cycloaddition proceeds in a two-step mechanism between the triplet state of 1 and Bu through biradical intermediates. Addition of cis-1,3-pentadiene quenched the reaction obeying the Stern–Volmer equation. The above quenching experiments and laser transient spectroscopy revealed that the triplet state of 1a reacts with Bu with much larger rate constant (1.3–1.6 × 10⁹ M^?1 s^?1) than that of 1b (4–5 × 10⁷ M^?1 s^?1) reflecting larger steric hindrance exerted in the reaction of 1b than that of 1a .     

Studies on the mechanism of 1,2-dihydropyrazin-2-one ring formation from dipeptidyl chloromethyl ketone and its chemical properties: immediate deamination during catalytic hydrogenation

1,2-Dihydropyrazin-2-one derivatives, which have two aminoalkyl groups at the positions 3 and 6, were found to be efficient tools for the construction of potent, selective and long-acting opioid mimetics. During the course of preparation, we found that the catalytic hydrogenation of 3,6-bis(benzyloxycarbonylaminomethyl)-5-methyl-1,2-dihydropyrazin-2-one to remove the benzyloxycarbonyl groups resulted in a side reaction. By MS and NMR studies and by preparation of additional 1,2-dihydropyrazin-2-one derivatives, the structure of the by-product was identified as 3-aminomethyl-5,6-dimethyl-1,2-dihydropyrazin-2-one. Preparation of additional compounds substituted with deuterium provided us with sufficient information to confirm the structure of the product and to support a cyclization mechanism in its formation.     

Editorial for Special Issue on Analysis of Asymmetric Relationships

Advances in Data Analysis and Classification -     

Mössbauer study of new vanadate glass with large charge-discharge capacity

Charge-discharge capacity and cyclicity of lithium ion battery (LIB) was evaluated in which 15Li₂O·10Fe₂O₃·xSnO₂·5P₂O₅·(70–x)V₂O₅ glass (x?=?0 and 20 in mol%, abbreviated as xLFSPV) was used as a cathode. A local structure of xLFSPV glass before and after charging was investigated by ⁵⁷Fe- and ¹¹⁹Sn-Mössbauer spectroscopies. ⁵⁷Fe-Mössbauer spectrum of xLFSPV glass with ‘x’ of 20 was composed of a doublet with isomer shift (δ) of 0.35_±0.02 mm s^???1 and quadrupole splitting (Δ) of 0.88_±0.03 mm s^???1 due to distorted Fe^IIIO₄ tetrahedra. ¹¹⁹Sn-Mössbauer spectrum of this glass consisted of a doublet with δ of 0.08_±0.01 and Δ of 0.52_±0.01 mms^???1 due to distorted Sn^VIO₆ octahedra. After discharging the battery from 4.5 to 1.0 V, larger δ of 0.40_±0.03 mm s^???1 and Δ of 0.94_±0.04 mm s^???1 were obtained, indicating that both iconicity of Fe-O bonds and local distortion of Fe^IIIO₄ tetrahedra were increased. On the contrary, identical δ of 0.09_±0.01 mm s^???1 and Δ of 0.50_±0.01 mm s^???1 were observed in the ¹¹⁹Sn-Mössbauer spectrum of 20LFSPV glass after the discharge, indicating that chemical environment of Sn^IVO₆ octahedra was not affected after the discharge. Charge-discharge curve of LIB containing 20LFSPV glass as a cathode active material recorded under the current density of 8.3 mA g^???1 (0.011 mA cm^???2) between 1.0 and 4.5 V showed a large initial charge capacity of 431.1 mAh g^???1 and discharge capacity of 382.3 mAh g^???1, respectively. These results indicate that 20LFSPV glass could be a new cathode active material for LIB.     

Design and synthesis of spiro bis(1,2,3-triazolium) salts as chiral ionic liquids

Room temperature chiral spiro ionic liquids 1 and 2 based on 1,2,3-triazolium salts, were synthesized via an intramolecular double Huisgen reaction. The preparation of the enantiomerically pure spiro triazolium salts was achieved by resolution by HPLC using a chiral stationary phase column and subsequent N-dialkylations of spiro triazoles 6 and 10.     

Reversible electro-optical switching of a memory type PDLC using two-frequency-addressing liquid crystals

Abstract

A memory type PDLC has been prepared by sandwiching a mixture of two-frequency-addressing liquid crystals and acrylate monomers with a hydoroxy group between two glass substrates with ITO electrodes followed by UV irradiation. This PDLC can be electrically switched between a transparent state and a light scattering state, which are maintained over several months without electric fields.