Surface cleaning of germanium nanodot ionization substrate for surface‐assisted laser desorption/ionization mass spectrometry

In surface‐assisted laser desorption/ionization mass spectrometry (SALDI‐MS), a chemical background signal, arising from organic contaminants such as plasticizers, is frequently observed mainly under m/z ca. 600, which impairs the advantages of the matrix‐free approach. Silver salts, which are used for the cationization of aromatic compounds, are also difficult to remove completely after the measurements. In this study, surface cleaning techniques used in semiconductor processing were used to clean our developed silicon‐based SALDI substrate on which self‐assembled germanium nanodots (GeNDs) had been deposited (termed a GeND chip). An immersion cleaning method using acetone with sonication, and a sulfuric‐peroxide mixture (SPM) cleaning method using a mixture of H₂SO₄/H₂O₂/deionized water, were examined for their effectiveness in removing organic compounds and residual silver salts. Removal of both types of contaminants was successfully performed by SPM cleaning. The limit of detection for glutathione was improved from ca. 5 pmol without cleaning to ca. 50 fmol after the SPM cleaning. Since GeND chips can tolerate acidic cleaning and sonication due to their chemical inertness and rigid nanodot structures, they appear to be an ideal reusable SALDI substrate. Copyright © 2009 John Wiley & Sons, Ltd.     

Optically transparent superhydrophobic TEOS-derived silica films by surface silylation method

Optically transparent silica films were prepared at room temperature (~27°C) by keeping the molar ratio of TEOS:MeOH:H₂O (0.001 M NH₄F) constant at 1:19.29:6.20, respectively. A surface chemical modification of the films was done with alkylchlorosilanes at different concentrations from 0 to 1 vol. % and aging times varied from half to 2 h. The DMCS and TMCS surface modified silica films showed the static water contact angle of 146° and 162°, respectively. When the DMCS and TMCS modified films were cured at temperatures higher than 240 and 275°C, respectively, the films became superhydrophilic. Further, the humidity study was carried out at a relative humidity of 90% at 30°C temperature over 60 days. We characterized the water repellent silica films by Fourier transform infrared spectroscopy, scanning electron microscopy, atomic force microscopy, % of optical transmission, humidity tests and contact angle measurements.     

Intensely Fluorescent Azobenzenes: Synthesis,Crystal Structures,Effects of Substituents,and Application to Fluorescent Vital Stain

2‐[Bis(pentafluorophenyl)boryl]azobenzenes bearing hydrogen, methoxy, dimethylamino, trifluoromethyl, fluoro, n‐butyl, and tert‐butyldimethylsiloxy groups at the 4′‐position or methoxy and bromo groups at the 4‐position have been synthesized. The 4‐bromo group of the 2‐boryl‐4‐bromoazobenzene derivative was converted to phenyl and diphenylamino groups by palladium‐catalyzed reactions. The absorption and fluorescence properties have been investigated using UV/Vis and fluorescence spectroscopy. The 2‐borylazobenzenes emitted an intense green, yellow, and orange fluorescence, in marked contrast to the usual azobenzene fluorescence. The 4′‐siloxy derivative showed the highest fluorescence quantum yield (0.90) among those reported for azobenzenes to date. The correlation between the substituent and the fluorescence properties was elucidated by studying the effect of the substituent on the relaxation process and from DFT and TD‐DFT calculations. An electron‐donating group at the 4′‐position was found to be important for an intense emission. Application of fluorescent azobenzenes as a fluorescent vital stain for the visualization of living tissues was also investigated by microinjection into Xenopus embryos, suggesting these compounds are nontoxic towards embryos.     

Analytical investigations of the behavior of silole-core dendrimers with peripheral globotriaose in water and acetone/water mixed solvent

A new compound having a 2,3,4,5-tetraphenylsilole derivative on the center silicon of Dumbbell(1)6Gb3; Silole-Dumbbell(1)6Gb3 (1) was previously reported. It was found that 1 exhibited strongly increased fluorescence both in water and in a 96% acetone/water mixed solvent. The physical behavior of 1 in water and in the 96% acetone/water mixed solvent was investigated, and analyses including fluorescence quantum yields, dynamic-light-scattering (DLS), atomic-force-microscopy (AFM), and fluorescence microscopy were carried out. It was clarified that 1 dynamically formed different types of aggregates in water and in higher acetone concentrations to yield high aggregation-induced emission (AIE) effects due to the formation of micelle-like particles in water and inversion-type micelles in the acetone/water mixed solvent, respectively.     

The first total synthesis of lactonamycin, a hexacyclic antitumor antibiotic

The total synthesis of lactonamycin has been achieved. The synthesis includes sequential intramolecular conjugate addition of alcohols to the acetylenic ester, stereoselective glycosylation of the tertiary alcohol, and Michael-Dieckmann type cyclization with the thioester, by which the highly convergent route has been established.     

Immunoassay based on a polyclonal antibody for sex steroid hormones produced by a heterogeneous hapten-conjugated immunogen: Estimation of its potentiality and antibody characteristics

A method in which antibodies are produced by using an immunogen heterogeneously conjugated with two or more kinds of haptens having unlike chemical structures against a same carrier protein was offered as an efficient approach for development of antibody to low molecular compounds. To appreciate the potentiality of the approach, 17β-estradiol (E2) and testosterone were selected as model compounds. The I₅₀ values of antiserum developed were 6 and 8 μg L⁻¹ with the detection limits of 0.02 and 0.15 μg L⁻¹ for E2 and testosterone, respectively. Antiserum owned an interesting characteristic that it was possible to independently analyze E2 and testosterone without mutual interference by making proper use of coating antigens. When using β-estradiol 17-hemisuccuinate (EH) conjugated with bovine serum albumin (BSA) as a coating antigen, the enzyme-linked immunosorbent assay (ELISA) was very selective to E2 and some estrogen analogues. Therefore, if testosterone coexisted in the ELISA for E2 detection, it showed no interference with it. From these findings, it was suggested that the verified method was an efficient and rational approach in development of polyclonal antibody to low molecular compounds.     

Impact of cell-voltage on energy and power performance of supercapacitors with single-walled carbon nanotube electrodes

We report the energy and power voltage-dependencies of supercapacitors using single-walled carbon nanotube electrodes. The energy density was dependent on the cell-voltage cubed (up to 4 V: E = 1.43 × V³). The cubic relationship was attributed to the linear increase of the capacitance as a function of voltage, enabled by electrochemical doping. Furthermore, while up to 3.5 V, the maximum power rating of the nanotube electrodes increased as a function of the cell-voltage squared, beyond 3.5 V, a decline in power was observed as a result of depletion of the electrolyte's ions.     

Rapid method for the determination of capsaicin and dihydrocapsaicin in Gochujang using ultra-high-performance liquid chromatography

A sensitive and specific heating block method coupled with ultra-HPLC (u-HPLC) was developed for the analysis of capsaicin in Gochujang and validated by comparing with a conventional HPLC (AOAC Method 995.03). The method validation parameters yielded good results, including linearity, precision, accuracy, and recovery. The u-HPLC separation was performed on a reversed C18 column (50 x 2 mm id, particle size 2 microm), followed by fluorescence detection (excitation 280 nm, emission 325 nm). Methanol was used as the extracting solvent, and the amount of sample taken was approximately 0.2 g; the optimum amount of extraction solvent and extraction time were 15 mL and 1 h, respectively. The recovery of capsaicin in Gochujang was more than 93%, and the LOD and LOQ of the u-HPLC analysis were 0.05 and 0.16 microg/g for capsaicin and 0.05 and 0.16 microg/g for dihydrocapsaicin. The calibration graphs for capsaicin and dihydrocapsaicin were linear from 0.2 to 10.0 microg/mL for u-HPLC. The interday and intraday precisions (RSD values) were < 6.27%.     

Highly durable Pd metal catalysts for the oxygen reduction reaction in fuel cells; coverage of Pd metal with silica

Pd cathode catalysts for polymer electrolyte fuel cells have been covered with silica layers a few nanometres thick. The silica-coated Pd catalysts showed high activity and excellent durability for the oxygen reduction under the severe cathode conditions of PEFCs, while Pd catalysts without silica-coating were seriously deactivated under the same conditions. The coverage of Pd metal with silica prevents the diffusion of Pd species out of the silica layers.