Dioxopyrrolines. LXII. Diels-Alder reaction of 1-Aryl-4- and 5-methoxycarbonyl-1H-pyrrole-2,3-diones with various 1,3-dienes

Two new dioxopyrrolines (1-aryl-4-methoxycarbonyl-1H-pyrrole-2,3-dione 6 and the 5-methoxycarbonyl isomer 8) behaved as good dienophiles to some kind of 1,3-dienes examined. In most cases, the products were explained by the reaction where the largest lobe of HOMO of dienes reacted to the larger LUMO of dienophiles in an expected cis-endo manner. However, in the reactions of 8 with alkylbutadienes, piperylene and isoprene, abnormality in the reaction was observed, which was well explained by taking account of steric factors.     

Thermally-induced radical rearrangement of 2-(2-thienylmethoxy)-and 2-(2-benzo[b]thienylmethoxy)tropones

Upon heating at ca. 160°, 2-(2-thienylmethoxy)tropone afforded 3- and 5(2-thienylmethyl)tropolones. Formation of 3,5-bis(2-thienylmethyl)tropolone and unsubstituted tropolone indicated a radical chain mechanism for the thermolysis.     

Highly efficient methods for metacyclophane synthesis

Highly efficient methods for synthesizing metacyclophanes such as 2,6-bridged pyrones and pyridines are described. 4-Hydroxy-2-pyrone derivative 3 bridged at the 3 and 6-positions is readily available. This compound was transformed into 2,6-bridged 4-pyrone 4 on heating in ethanol or in hydrochloric acid. Heating 4 with ammonia or methylamine afforded the corresponding 2,6-bridged 4-pyrone 7 or 8. These pyridones were synthesized directly from 3 by treatment with ammonia or methylamine. These methods have a wide applicability to the bridge length of metacyclophane; compounds with a short bridge (n=8) as well as long bridge (n=18) are synthesized in satisfactory yields.     

Bifunctional organocatalysts for enantioselective aza-Morita-Baylis-Hillman reaction

The efficient and novel bifunctional organocatalyst for the enantioselective aza-Morita-Baylis-Hillman (aza-MBH) reaction has been established with (S)-3-(N-isopropyl-N-3-pyridinylaminomethyl)BINOL for the first time. The reaction proved to be deeply influenced by the position of the Lewis base attached to BINOL. The acid-base-mediated functionalities for the activation of the substrate and the fixing of conformation of the organocatalyst are harmoniously performed to promote the reaction with high enantiocontrol.     

Metallic copper for the standardization of edta solution

The standardization of EDTA solution against metallic copper as primary standard is studied. Six indicators were examined; titration with PAN as indicator at pH 6 is recommended.     

Preparation of dry powder inhalation with lactose carrier particles surface-coated using a Wurster fluidized bed

An attempt was made to produce carrier particles for dry powder inhalation with lactose carrier particles surface-coated using a Wurster fluidized bed. The lactose carrier particles were coated with lactose aqueous solution containing hydroxypropyl methyl cellulose (HPMC) as a binder using a Wurster coating apparatus. Drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers under various particle surface conditions. These powder mixtures were aerosolized by a Jethaler((R)), and the in vitro deposition properties of salbutamol sulfate were evaluated by a twin impinger. The in vitro inhalation properties of the powder mixture prepared using the coated lactose carrier differed significantly compared with those of the powder mixture prepared using the uncoated lactose carrier, indicating improvements in in vitro inhalation properties of sulbutamol sulfate. In vitro inhalation properties increased with the surface coating time. This surface coating system would thus be valuable for increasing the in vitro inhalation properties of dry powder inhalation with lactose carrier particles.     

Conformational peculiarities of alcohols incorporated in lyotropic and thermotropic liquid crystals

Conformational characteristics of 1-butanol incorporated not only in hexagonal and lamellar aggregates formed by a lyotropic liquid crystal composed of sodium octanoate, 1-butanol, and water but also in a thermotropic liquid crystal, 4'-methoxybenzylidene-4-n-butylaniline (MBBA), have been investigated from 2H NMR quadrupolar splittings of the perdeuterated and partially deuterated compounds. In the lyotropic phases, 1-butanol shows strong trans preferences and renders itself extended, and octanoate decreases the trans fraction toward the methyl terminal to fill the inner space of the aggregate on behalf of 1-butanol. In MBBA, 1-butanol prefers globular conformations. This tendency was also indicated from the phase behaviors of 1-butanol/MBBA and 1-decanol/MBBA systems. In the nematic field, two successive C-C bonds of 1-butanol mostly adopt g+/-g+/- conformations, which are formed in the vicinity of the headgroup of 1-decanol in the lamella of the sodium octanoate/1-decanol/water system. A large degree ofconformational freedom near the hydroxyl group of alcohols, being shown by ab initio molecular orbital calculations at the Gaussian-2 level, permits them to change conformation for each environment.     

Amplification of chirality from molecules into morphology of crystals through molecular recognition

We have found a novel type of morphological chiral tuning on inorganic helical crystals through stereochemical recognition of organic molecules. Helical forms consisting of twisted twins emerged from triclinic crystals under diffusion-limited conditions. The proportion of the right- and left-handed helices was precisely tuned with the addition of a specified amount of chiral molecules, such as d- and l-glutamic acids. The chiral molecules recognized the enantiomeric surface of the triclinic crystal and then changed the growth behavior of the helical morphology. As a result, the microscopic chiral information, at a molecular level, was amplified into the macroscopic helices consisting of inorganic achiral components.     

Proposed mechanism for the reaction catalyzed by a diterpene cyclase,aphidicolan-16beta-ol synthase: experimental results on biomimetic cyclization and examination of the cyclization pathway by ab initio calculations

To examine the mechanism of the cyclization reaction catalyzed by aphidicolan-16beta-ol synthase (ACS), which is a key enzyme in the biosynthesis of diterpene aphidicolin, a specific inhibitor of DNA polymerase alpha, skeletal rearrangement of 2a and biomimetic cyclization of 4b were employed. The structures of the reaction products, which reflect penultimate cation intermediates, allowed us to propose a detailed reaction pathway for the Lewis acid-catalyzed cyclizations and rearrangements. Isolation of these products in an aphidicolin-producing fungus led us to speculate that the mechanism of the ACS-catalyzed cyclization reaction is the same as that of a nonenzymatic reaction. Ab initio calculations of the acid-catalyzed reaction intermediates and the transition states indicate that the overall reaction catalyzed by ACS is an exothermic process though the reaction proceeds via an energetically disfavored secondary cation-like transition state. In conjunction with the solvent effect in the acid-catalyzed reactions, this indicates that the actual role of ACS is to provide a template which enforces conformations of the intermediate cations leading to the productive cyclization although it has been believed that the cation-pi interaction between cation intermediates and aromatic amino acid residues in the active site is important for the enzymatic catalysis. This study provided important information on the role of various cationic species, especially secondary cation-like structures, in both nonenzymatic and enzymatic reactions.     

Pre-fibrillation of pulps to manufacture cellulose nanofiber-reinforced high-density polyethylene using the dry pulp direct kneading method

The dry pulp direct kneading method is an industrially viable, low-energy process for manufacturing cellulose nanofiber (CNF)-reinforced polymer composites, where the chemically modified pulps are nanofibrillated and uniformly dispersed in the polymer matrix during melt compounding. In the present study, cellulose fibers of various sizes ranging from surface-fibrillated pulps (20 μm in width) to fine CNFs (20 nm in width) were prepared from softwood bleached kraft pulps using a refiner and a high-pressure homogenizer. These cellulose fibers were modified with alkenyl succinic anhydride and dried. The dried fibers were used as a feed material for melt compounding in the dry pulp direct kneading method to fabricate CNF-reinforced high-density polyethylene (HDPE). When surface-fibrillated pulps were employed as a feed material, the pulps were nanofibrillated and dispersed uniformly in the HDPE matrix during melt compounding. The resulting composites had much better properties—i.e., much higher tensile modulus and strength values, and much lower coefficient of thermal expansion values—than the composites produced using pulps without pre-fibrillation. However, when CNFs were used as a feed material, they were shortened and agglomerated during melt compounding, and the properties of the composites consequently deteriorated. The study concludes that surface-fibrillated pulp, which can be produced cost-effectively using a refiner on an industrial scale, is more suitable as a feed material than CNFs for melt compounding in the dry pulp direct kneading method. This finding enables the elimination of a preliminary step in the preparation of CNFs from pulps, which is a time-consuming and energy-intensive process.

Graphical abstract