Spectroscopic evidence for triplet excitation energy transfer among carotenoids in the LH2 complex from photosynthetic bacterium <Emphasis Type="Italic">Rhodopseudomonas palustris</Emphasis>

The LH2 complex from Rhodopsudomonas (Rps.) palustris is unique in the heterogeneous carotenoid compositions. The dynamics of triplet excited state Carotenoids (³Car* has been investigated by means of sub-microsecond time-resolved absorption spectroscopy both at physiological temperature (295 K) and at cryogenic temperature (77K). Broad and asymmetric T _n ←T ₁ transient absorption was observed at room temperature following the photo-excitation of Car at 532 nm, which suggests the contribution from various carotenoid compositions having different numbers of conjugated C=C double bonds (N_c=c). The triplet absorption bands of different carotenoids, which superimposed at room temperature, could be clearly distinguished upon decreasing the temperature down to 77 K. At room temperature the shorter-wavelength side of the main T_n04T₁ absorption band decayed rapidly to reach a spectral equilibration with a characteristic time constant of ∽1 μs, the same spectral dynamics, however, was not observed at 77 K. The aforementioned spectral dynamics can be explained in terms of the triplet-excitation transfer among heterogeneous carotenoid compositions. Global spectral analysis was applied to the time-resolved spectra at room temperature, which revealed two spectral components peaked at 545 and 565 nm, and assignable to the T_n04 T₁ absorption of Cars with Nc=c=11 and Nc=c=13, respectively. Surprisingly, the decay time constant of a shorter-conjugated Car, i.e. 0.72 ώs (aerobic) and 1.36 ώs (anaerobic), is smaller than that of a longer-conjugated Car, i.e. 2.12 us (aerobic) and 3.75 ώs (anaerobic), which is contradictory to the general rule of carotenoids and relative polyenes. The results are explained in terms of triplet-excitation transfer among different types of Cars. It is postulated that two Cars with different conjugation lengths coexist in an α, β-subunit in the LH2 complex.     

Energetic ion bombardment of Ag surfaces by C<Stack><Subscript>60</Subscript><Superscript>+</Superscript></Stack> and Ga<Superscript>+</Superscript> projectiles

The ion bombardment-induced release of particles from a metal surface is investigated using energetic fullerene cluster ions as projectiles. The total sputter yield as well as partial yields of neutral and charged monomers and clusters leaving the surface are measured and compared with corresponding data obtained with atomic projectile ions of similar impact kinetic energy. It is found that all yields are enhanced by about one order of magnitude under bombardment with the C60+ cluster projectiles compared with Ga+ ions. In contrast, the electronic excitation processes determining the secondary ion formation probability are unaffected. The kinetic energy spectra of sputtered particles exhibit characteristic differences which reflect the largely different nature of the sputtering process for both types of projectiles. In particular, it is found that under C60+ impact (1) the energy spectrum of sputtered atoms peaks at significantly lower kinetic energies than for Ga+ bombardment and (2) the velocity spectra of monomers and dimers are virtually identical, a finding which is in pronounced contrast to all published data obtained for atomic projectiles. The experimental findings are in reasonable agreement with recent molecular dynamics simulations.     

Investigation of 2-[(<Emphasis Type="Italic">E</Emphasis>)-2-(4-diethylaminophenyl)-1-ethenyl]-1,3,3-trimethyl-3H-indolium as a new highly sensitive reagent for the spectrophotometric determination of nitrophenols

A new, simple, rapid, and sensitive spectrophotometric method has been developed for the determination of nitrophenols [picric acid (PA); dinitrophenols (DNP)] in wastewater samples. The method is based on the reaction of nitrophenols with 2-[(E)-2-(4-diethylaminophenyl)-1-ethenyl]-1,3,3-trimethyl-3 H-indolium chloride reagent to form the colored ion associates, which are extracted by organic solvents. The molar absorptivity of the ion associates of PA with the investigated reagent ranges from 8.3×10⁴ to 11.3×10⁴ L mol^–1 cm^–1, depending on the extractant. Because only PA is extracted in an acidic medium with the investigated reagent, but both PA and DNP are extracted in an alkaline medium, it is possible to determine both substances in a mixture. Appropriate reaction conditions have been established. The absorbance of the colored extracts obeys Beers law in the range of 0.04–4.58 mg L^–1 PA, 1.0–18.4 mg L^–1 2,4-DNP and 1.2–14.7 mg L^–1 2,6-DNP, respectively. The limit of detections, calculated from a blank test (n=10; P=0.95), are 0.05 mg L^–1 PA, 0.9 mg L^–1 (2,4-DNP), and 1.1 mg L^–1 (2,6-DNP), respectively.     

Application of stir bar sorptive extraction for wine analysis

Stir bar sorptive extraction (SBSE) coupled with gas chromatography/mass spectrometry (GC/MS) was used to analyse wine samples for three applications: flavour and compositional analysis; 2,4,6-trichloroanisole (TCA), a common off-aroma in wine; and agrochemicals. SBSE was found to be orders of magnitude more sensitive than modern conventional methodology, allowing for lower detection and quantitation levels, and improved confirmation of identity; SBSE often gave better signal to noise in scan mode than other methods in selective ion monitoring (SIM) mode. With the help of their characteristic mass spectra all agrochemicals could be identified unambiguously at concentrations of 10 microg L(-1) in wine and a further 100 constituents were detected in a Cabernet Sauvignon sample. Thus it is now possible to analyse complex samples such as wine by scan mode, with better confirmation of identity, and without sacrificing sensitivity, where previously SIM methodology had to be used.     

Underpotential deposition of tin(II) on a gold disc electrode and determination of tin in a tin plate sample

This work describes a study of the underpotential deposition (UPD) of Sn²⁺ on a polycrystalline gold disc electrode using cyclic voltammetry (CV) and chronocoulometry (CC). Sn²⁺ ions showed well-defined peaks from UPD and UPD stripping (UPD-S) in 1 mol/L HCl solutions, while bulk deposition (BD) and BD stripping (BD-S) of the ions were also observed. The measured UPD shifts, E_UPD, between the UPD-S and the BD-S peaks were more than 200 mV. The UPD charge and the surface coverage of tin were measured by CC. A new method for determining Sn²⁺ was therefore developed, based on the excellent electrochemical properties of the Au/Sn UPD system. A plot of the UPD-DPASV (differential pulse anodic stripping voltammetry) signal versus the Sn(II) concentration was obtained for [Sn(II)] of 1.98×10^–7 to 3.64×10^–5 M. The method developed here has been applied to determine the tin in a tin plate sample.     

Some trends in the development of microplasmas for spectrochemical analysis

The development of microplasmas for spectrochemical analysis by optical methods is discussed. Recent achievements in miniaturization are highlighted, especially for three types of plasmas, namely high-frequency plasmas, dc-discharges and microwave plasmas. The potentials of each of these groups of plasmas as sources for atomic emission spectrometry are discussed. Literature citations and experiments indicate that the plasmas are also very useful as atom reservoirs for atomic absorption spectrometry. Methods of sampling, including feeding with gas chromatography effluents, the use of electrothermal vaporization, and the evolution of gaseous species (as shown for the case of Hg vapor), are discussed as prominent interfaces to make use of these sources for elemental analysis.     

Separation of Anions of Organic Acids in Concentrated Solutions by Means of Capillary Isotachophoresis

The separation of a mixture containing anions of nine organic acids is investigated on an instrument for capillary isotachophoresis with an optical detector for the registration of boundaries. The separation is conducted in concentrated solutions of sodium salts. A counterflow is used during the separation.     

Characterization of Ultrathin Films of Cellulose Esters

The adsorption of cellulose acetate (CA), cellulose acetate propionate (CAP) and cellulose acetate butyrate (CAB) from solutions prepared in acetone onto silicon wafers led to ultrathin films, which were characterized by ellipsometry, atomic force microscopy (AFM) and contact angle measurements. The polysaccharides films were characterized in the air just after their formation and after annealing at temperatures higher than their glass transition temperature or melt temperature. The films thickness close to 2 nm and surface roughness did not vary significantly upon annealing. AFM images revealed the presence of small clumps dispersed on a homogeneous layer, which covered completely the Si wafers. Such topographic details were also observed after annealing. However, upon annealing the films surfaces changed from hydrophilic to hydrophobic, evidencing molecular re-orientation at the solid–air interface. The adhesion of bovine serum albumin (BSA) and lipase onto the cellulose esters films was quantified in order to evaluate the possibility of applying such films as selective support for biomolecules.     

LC-MS/MS method for the confirmatory determination of aromatic amines and its application in textile analysis

A confirmation method for the determination of 18 aromatic amines originating from azo dyes after reductive cleavage was developed. The method is based on the use of high-performance liquid chromatography/tandem mass spectrometry with atmospheric-pressure chemical ionization. For the identification of the analytes one precursor ion and two daughter ions (multi-reaction monitoring, MRM) were selected and the LC-MS/MS parameters optimized to obtain high sensitivity and selectivity. The linear ranges varied from 0.1–1 to 30–50 g mL^–1 with correlation coefficients of 0.99 or better. The applicability of the method to determine o-tolidine (3,3-dimethylbenzidine) and 3,3-dimethoxybenzidine in textiles following reductive cleavage of acid red 114, trypan blue, and Chicago sky blue 6B was demonstrated.