High output power operation of 1.3-μm strained MQW lasers with low threshold currents at high temperature

We have investigated the temperature dependencies of the slope efficiency and the threshold current for strained multiquantum well (MQW) lasers as a parameter of the well number. Smaller well numbers mean larger temperature dependencies of the slope efficiency and the threshold current, while larger well numbers mean larger internal loss and broadening of the photoluminescence linewidth of the MQW structure. Furthermore, the change in the slope efficiency with temperature change is related to the change in internal loss. In this work, the 1.3-m strained MQW laser with a compressive strain of 1.0% and 7 wells shows the highest output power of 6.8 mW for an injection current of 50 mA and the lowest threshold current of 5.5 mA at 85°C, and the lowest variation in output power of 2.0 dB from 25–85°C at injection current of 50 mA.     

High-efficiency continuous-wave diode-pumped Tm:Ho:LuAG laser at 2.1 μm

Continuous Wave (CW) laser action has been observed from a Ho:Tm:LuAG rod at 2.1 m pumped by a diode laser at 785 nm in the temperature range of 77–200 K. The maximum power observed was 1.38 W at an incident power of 4 W at a crystal temperature of 77 K. The optical-to-optical conversion efficiency was observed to be 35.6% at a threshold power of 0.2 W with a 95% output coupling mirror.     

Reduction of inelastic scattering effect by introduction of GalnAs/GalnP strain-compensated superlattice into multi-quantum barriers

The effect of inelastic scattering on the electron reflection in multi-quantum barriers (MQBs) has been examined using the damped resonant tunnelling model for the first time. The electron reflectivity in the virtual barrier region for unstrained GalnAs/InP MQB deteriorates below 100% by about 10% for phase relaxation time of 0.22ps. We propose a strain-compensated GalnAs/GalnP MQB which not only has virtual barrier 4 times as high as that of an unstrained MQB, but whose reflectivity deterioration is reduced to less than 5% in comparison with 10% for unstrained MQB for the same phase relaxation time. We have also successfully grown a Ga_0.25In_0.75As (1.5% compressive) well/Ga_0.25In_0.75P (1.2% tensile) barrier short-period superlattice with six wells by chemical beam epitaxy, which exhibits the possibility of fabrication of the strain-compensated MQBs.     

Self-mode-locking in a Q-switched Nd: doped silica fibre laser

Operating characteristics of a Q-switched Nd³⁺: doped single-mode silica fibre with a mechanical chopper as a Q-switching device are presented. Peak powers as high as 16 W with pulse duration of 146 ns are demonstrated. Self-mode-locking in Nd³⁺:doped fibre is also reported. An output power of 312 W with a centre pulse duration of 4 ns is observed.     

Thermomagnetic effect in ferrofluids with weakly coupled particles

Thermomagnetic curves for water based ferrofluid with large magnetic latex particles are analyzed. The particles are found to have extremely low barrier height of thermal relaxation (≤1200 K at temperatures below 100 K) whose field dependence is deduced. Work sponsored by the National Science Council of the R.O.C. under Grant No. NSC85-2112-M-001-020.     

Possible candidates for discrete gamma rays linking superdeformed and yrast states in an odd nucleus:193Pb

The francium isotopes^200–202Fr were produced in the reaction³⁵Cl+¹⁷⁰Yb using bombarding energies of 4.9–5.3 MeV/nucleon. Fusion products were separated in-flight from the primary beam using a gas-filled recoil separator. An alpha line with the alpha particle energy and half-life of (7468±9) keV and (19 ₋₆ ⁺¹³ ) ms, respectively, was assigned to²⁰⁰Fr. Previously reported decay properties of^201,202Fr were confirmed. Communicated by V. Metag     

Self-aligned imaging system using phase conjugate readout from elementary holographic grating

We propose a self-aligned imaging system (SAIS) using phase conjugate readout from an elementary holographic grating. The SAIS provides a huge amount of interconnections between a lot of points on two corresponding imaging planes without troublesome mechanical alignment. In the SAIS, a hologram for one-to-one interconnection is used for many-to-many interconnections. In addition, the SAIS has the capability of correcting aberration. Preliminary experiments verify the principle and the capability of the SAIS.     

One-dimensional modelling of TEA CO2 lasers

One-dimensional modelling was applied to a TEA CO₂ laser whose discharge volume was divided into multiple narrow channels. Each of these channels was regarded as a separate laser channel in which a circuit-coupled kinetic model was employed to compute its discharge formation, and a rate-equation model was used to predict its laser output. Such a one-dimensional model could be employed to study the spatial variation in the transverse discharge—due mainly to a one-sided ultraviolet-preionization and the electrode contour—and its effects on the laser output. Reasonably good agreement was obtained between the one-dimensional model and the experiment, which employed a pair of Ernst profile electrodes.     

Determination of the chiral structure of [Formula: see text] using anomalous x-ray scattering near the Cs K absorption edge

A structural study of [Formula: see text], grown from aqueous solution, was performed using anomalous x-ray scattering near the Cs K absorption edge to determine an absolute configuration of constituent atoms. The sense of the helical structure of the [Formula: see text] chain was found to be predominantly right-handed through a comparison of observed Bragg Bijvoet ratios with calculated ones. Assuming that [Formula: see text] consists of the two domains (i.e. right- and left-handed helices), we estimate that the volume fraction for the right-handed helix is [Formula: see text].