Rotational spectra of the van der Waals complexes of molecular hydrogen and OCS

The a- and b-type rotational transitions of the weakly bound complexes formed by molecular hydrogen and OCS, para-H2-OCS, ortho-H2-OCS, HD-OCS, para-D2-OCS, and ortho-D2-OCS, have been measured by Fourier transform microwave spectroscopy. All five species have ground rotational states with total rotational angular momentum J=0, regardless of whether the hydrogen rotational angular momentum is j=0 as in para-H2, ortho-D2, and HD or j=1 as in ortho-H2 and para-D2. This indicates quenching of the hydrogen angular momentum for the ortho-H2 and para-D2 species by the anisotropy of the intermolecular potential. The ground states of these complexes are slightly asymmetric prolate tops, with the hydrogen center of mass located on the side of the OCS, giving a planar T-shaped molecular geometry. The hydrogen spatial distribution is spherical in the three j=0 species, while it is bilobal and oriented nearly parallel to the OCS in the ground state of the two j=1 species. The j=1 species show strong Coriolis coupling with unobserved low-lying excited states. The abundance of para-H2-OCS relative to ortho-H2-OCS increases exponentially with decreasing normal H2 component in H2He gas mixtures, making the observation of para-H2-OCS in the presence of the more strongly bound ortho-H2-OCS dependent on using lower concentrations of H2. The determined rotational constants are A=22 401.889(4) MHz, B=5993.774(2) MHz, and C=4602.038(2) MHz for para-H2-OCS; A=22 942.218(6) MHz, B=5675.156(7) MHz, and C=4542.960(7) MHz for ortho-H2-OCS; A=15 970.010(3) MHz, B=5847.595(1) MHz, and C=4177.699(1) MHz for HD-OCS; A=12 829.2875(9) MHz, B=5671.3573(7) MHz, and C=3846.7041(6) MHz for ortho-D2-OCS; and A=13 046.800(3) MHz, B=5454.612(2) MHz, and C=3834.590(2) MHz for para-D2-OCS.     

Quantitative lateral force microscopy study of the dolomite (104)-water interface

The friction and lateral stiffness of the contact between an atomic force microscopy (AFM) probe tip and an atomically flat dolomite (104) surface were investigated in contact with two aqueous solutions that were in equilibrium and supersaturated with respect to dolomite, respectively. The two aqueous solutions yielded negligible differences in friction at the native dolomite-water interface. However, the growth of a Ca-rich film from the supersaturated solution, revealed by X-ray reflectivity measurements, altered the probe-dolomite contact region sufficiently to observe distinct friction forces on the native dolomite and the film-covered surface regions. Quantitative friction-load relationships demonstrated three physically distinct load regimes for applied loads up to 200 nN. Similar friction forces were observed on both surfaces below 50 nN load and above 100 nN load. The friction forces on the two surfaces diverged at intermediate loads. Quantitative measurements of dynamic friction forces at low load were consistent with the estimated energy necessary to dehydrate the surface ions, whereas differences in mechanical properties of the Ca-rich film and dolomite surfaces were evidently important above 50 nN load. Attempts to fit the quantitative stiffness-load data using a Hertzian contact mechanical model based on bulk material properties yielded physically unrealistic fitting coefficients, suggesting that the interfacial contact region must be explicitly considered in describing the static and dynamic contact mechanics of this and similar systems.     

Terthienyl-Based Redox-Switchable Hemilabile Ligands: Transition Metal Polymeric Complexes with Electrochemically Tunable or Switchable Coordination Environments?

By controlling the extent of oxidation of the polymeric forms of the new class of isolable, polymerizable terthienyl Ru^II complexes 1 , one can modulate both the binding strength of the polymer backbone for Ru^II and the electronic nature of the bound metal centers.     

Transgenic peas expressing an α‐amylase inhibitor gene from beans show altered expression and modification of endogenous proteins

Differential in‐gel electrophoresis showed contrasting effects of the transgenic expression of an α‐amylase inhibitor from beans on the proteomes of two pea cultivars. One cultivar showed minor changes relative to its non‐transgenic parent with only one protein changing by more than about twofold. Changes in the abundance of certain endogenous proteins in the other cultivar were of greater number and magnitude with some endogenous proteins undetected while some new protein spots appeared in the transgenic proteome. The sets of proteins with altered expression were generally different between the two cultivars. Some of the proteins that were differentially expressed were identified by MS. Most were seed storage globulins, which are sited together with the transgenic product. Some of the changes may be due to alterations in expression levels but there were also changes due to post‐translational processing.     

Toward exceeding the Shockley-Queisser limit: photoinduced interfacial charge transfer processes that store energy in excess of the equilibrated excited state

Nanocrystalline (anatase), mesoporous TiO2 thin films were functionalized with [Ru(bpy)2(deebq)](PF6)2, [Ru(bq)2(deeb)](PF6)2, [Ru(deebq)2(bpy)](PF6)2, [Ru(bpy)(deebq)(NCS)2], or [Os(bpy)2(deebq)](PF6)2, where bpy is 2,2'-bipyridine, bq is 2,2'-biquinoline, and deeb and deebq are 4,4'-diethylester derivatives. These compounds bind to the nanocrystalline TiO2 films in their carboxylate forms with limiting surface coverages of 8 (+/- 2) x 10(-8) mol/cm2. Electrochemical measurements show that the first reduction of these compounds (-0.70 V vs SCE) occurs prior to TiO2 reduction. Steady state illumination in the presence of the sacrificial electron donor triethylamine leads to the appearance of the reduced sensitizer. The thermally equilibrated metal-to-ligand charge-transfer excited state and the reduced form of these compounds do not inject electrons into TiO2. Nanosecond transient absorption measurements demonstrate the formation of an extremely long-lived charge separated state based on equal concentrations of the reduced and oxidized compounds. The results are consistent with a mechanism of ultrafast excited-state injection into TiO2 followed by interfacial electron transfer to a ground-state compound. The quantum yield for this process was found to increase with excitation energy, a behavior attributed to stronger overlap between the excited sensitizer and the semiconductor acceptor states. For example, the quantum yields for [Os(bpy)2(dcbq)]/TiO2 were phi(417 nm) = 0.18 +/- 0.02, phi(532.5 nm) = 0.08 +/- 0.02, and phi(683 nm) = 0.05 +/- 0.01. Electron transfer to yield ground-state products occurs by lateral intermolecular charge transfer. The driving force for charge recombination was in excess of that stored in the photoluminescent excited state. Chronoabsorption measurements indicate that ligand-based intermolecular electron transfer was an order of magnitude faster than metal-centered intermolecular hole transfer. Charge recombination was quantified with the Kohlrausch-Williams-Watts model.     

Computed tomographic X-ray velocimetry for simultaneous 3D measurement of velocity and geometry in opaque vessels

Computed tomographic X-ray velocimetry has been developed for simultaneous three-dimensional measurement of flow and vessel geometry. The technique uses cross-correlation functions calculated from X-ray projection image pairs acquired at multiple viewing angles to tomographically reconstruct the flow through opaque objects with high resolution. The reconstruction is performed using an iterative, least squares approach. The simultaneous measurement of the object’s structure is performed with a limited projection tomography method. An extensive parametric study using Monte Carlo simulation reveals accurate measurements with as few as 3 projection angles, and a minimum required scan angle of only 30°. When using a single/source detector system, the technique is limited to measurement of periodic or steady flow fields; however, with the use of a multiple source/detector system, instantaneous measurement will be possible. Synchrotron experiments are conducted to demonstrate the simultaneous measurement of structure and flow in a complex geometry with strong three-dimensionality. The technique will find applications in biological flow measurement, and also in engineering applications where optical access is limited, such as in mineral processing.     

Liquid deposition patterning of conducting polymer ink onto hard and soft flexible substrates via dip-pen nanolithography

Ink formulations and protocols that enable the deposition and patterning of a conducting polymer (PEDOT:PSS) in the nanodomain have been developed. Significantly, we demonstrated the ability to pattern onto soft substrates such as silicone gum and polyethylene terephthalate (PET), which are materials of interest for low cost, flexible electronics. The deposition process and dimensions of the polymer patterns are found to be critically dependent on a number of parameters, including the pen design, ink properties, time after inking the pen, dwell time of the pen on the surface, and the nature of material substrate. By assessing these different parameters, an improved understanding of the ability to control the dimensions of individual PEDOT:PSS structures down to 600 nm in width and 10-80 nm in height within patterned arrays was obtained. This applicability of DPN for simple and nonreactive liquid deposition patterning of conducting polymers can lead to the fabrication of organic nanoelectronics or biosensors and complement the efforts of existing printing techniques such as inkjet and extrusion printing by scaling down conductive components to submicrometer and nanoscale dimensions.     

Direct synthesis of aqueous quantum dots through 4,4'-bipyridine-based twin ligand strategy

We report a new class of derivatized 4,4'-bipyridinium ligands for use in synthesizing highly fluorescent, extremely stable, water-soluble CdSe and CdTe quantum dots (QDs) for bioconjugation. We employed an evaporation-condensation technique, also known as solvated metal atom dispersion (SMAD), followed by a digestive ripening procedure. This method has been used to synthesize both metal nanoparticles and semiconductors in the gram scale with several stabilizing ligands in various solvents. The SMAD technique comprised evaporation condensation and stabilization of CdSe or CdTe in tetrahydrofuran. The as-prepared product was then digestively ripened in both water and dimethyl formamide, leading to narrowing of the particle size distributions. The ligands were synthesized by nucleophilic substitution (S(N)2) reactions using 4,4'-bipyridine as a nucleophile. Confocal microscopy images revealed the orange color of the nanocrystalline QDs with diameters of ~5 nm. The size has been confirmed by using transmission electron microscopy. As a part of our strategy, 85% of the 4,4'-bipyridinium salt was synthesized as propionic acid derivative and used to both stabilize the QDs in water and label basic amino acids and different biomarkers utilizing the carboxylic acid functional group. Fifteen percent of the 4,4'-bipyridinium salt was synthesized as N-propyl maleimide and used as a second ligand to label any protein containing the amino acid cysteine by means of a 1,4-Michael addition.     

An Operations Research Approach to the Problem of the Sugarcane Selection

Selection for superior clones is the most important aspect of sugar cane improvement programs, and is a long and expensive process. While studies have investigated different components of selection independently, there has not been a whole system approach to improve the process. This study observes the problem as an integrated system, where if one parameter changes the state of the whole system changes. A computer based stochastic simulation model that accurately represents the selection was developed. This paper describes the simulation model, showing its accuracy as well as how a combination of dynamic programming and branch and bound can be applied to the model to optimise the selection system, giving a new application of these techniques. The model can be directly applied to any region targeted by sugarcane breeding programs or to other clonally propagated crops.     

A computer program for the automatic identification of edible oils by gas—liquid chromatography

A computer program is given for the identification of edible oils from their fatty acid ratios. The program was used with the Hewlett-Packard 3354 Laboratory Automation System in autocall mode to identify a number of vegetable oils from the fatty acid ratios determined by gas chromatography of the trans-esterified oil samples.