Functionalization of polyethylene based on metallocene catalysis and its application to syntheses of new graft copolymers possessing polar polymer segments

The control of hydroxylated polyethylene (PE) structures was investigated in the copolymerization of ethylene with allyl alcohol or 10-undecen-1-ol with a specific metallocene, methylaluminoxane, and trialkyl aluminum catalyst system through changes in the copolymerization conditions. The incorporation of allyl alcohol into the PE backbones was controllable through changes in the trialkyl aluminum, leading to terminally hydroxylated PE or a copolymer possessing hydroxyalkyl side chains. The copolymerization of ethylene with 10-undecen-1-ol gave copolymers with hydroxyalkyl side chains of various contents with a variety of molecular weights through changes in the copolymerization conditions. The obtained copolymers were useful as macroinitiators that allowed polar polymer segments to grow on the PE backbones, leading to the creation of graft copolymers that possessed PE and polar polymer segments. In this way, polyethylene-g-poly(propylene glycol) (PE-g-PPG) and polyethylene-g-poly(ϵ-caprolactone) (PE-g-PCL) were synthesized. The ¹³C NMR analysis of PE-g-PPG suggested that all the hydroxyl groups were consumed for propylene oxide polymerization, and transmission electron microscopy demonstrated nanoorder phase separation and indistinct phase boundaries. ¹³C NMR and gel permeation chromatography analyses indicated the formation of PE-g-PCL, in which 36–80 mol % of the hydroxyl groups worked as initiators for ϵ-caprolactone polymerization. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3657–3666, 2003     

Morphological studies of a hydrogen-bonded LC polymer obtained by photopolymerization in LC solvents

Anisotropic morphologies and the phase behaviour of a hydrogen-bonded LC polymer obtained by photopolymerization in two kinds of LC solvent are discussed. The hydrogen-bonded LC monomer, 4-(6-acryloyloxyhexyloxy) benzoic acid (A6OBA), was photopolymerized in 4-cyano-4'-hexyloxybiphenyl (6OCB) and in 4-cyano-4'-undecyloxybiphenyl (11OCB), which show a nematic phase and a smectic A phase, respectively. After photo-polymerization, the LC media were removed by extraction and the pure polymer was observed by scanning electron microscopy. SEM images showed that the polymer possessed fibrous morphology with a fibre diameter of a few micrometers, based on polymerization-induced phase separation. The overall geometries reflected typical LC characteristics such as schlieren and focal-conic fan textures. It was found that the hydrogen bond between benzoic acid groups in the monomer was rigid enough to fix the anisotropic phase-separated structure forming during the early stage of phase separation; however, it could not permanently maintain the fibre structure due to dissociation at elevated temperature. X-ray measurements revealed that a well developed layer structure of the hydrogen-bonded mesogen existed in the polymer obtained from the smectic phase of 11OCB, whereas a polymer layer structure could develop only partially from the nematic phase of 6OCB.     

Triple ion-type imidazolium salts: A new class of single-ion conductive matrix

Four kinds of triple ion-type imidazolium salts have been prepared. These salts consist of an imidazolium cation incrporating two sulfonate groups, which is anticipated to provide a single-ion conductive matrix. The melting point of some of these was over 200 °C, whereas both sodium salts having methyl group on the imidazolium ring showed only a glass transition temperature at around 20 °C. They showed the highest ionic conductivity among these triple ion-type imidazolium salts. Since these imidazolium ions are rather large, the predominant mobile species will be the small counter-cation. These salts certainly open up new possibilities for functional ionic liquids.     

Simultaneous liquid chromatographic measurement of melatonin and related indoles through post-column electrochemical demethylation and fluorescence derivatization.

In this paper we describe a highly sensitive and selective liquid chromatographic method for the determination of 5-methoxyindoles (5-methoxyindole-3-acetic acid, 5-methoxytryptamine, 5-methoxytryptophol, and melatonin) using a post-column technique involving electrolytic demethylation followed by fluorescence derivatization with benzylamine. We separated these compounds within 30 min by reversed-phase liquid chromatography using acetate buffer (pH 6.5)-acetonitrile-methanol [8:1:1 (v/v); isocratic elution] and then demethylated them, using a commercial coulometric system, to give the corresponding 5-hydroxyindoles. Next, we converted the 5-hydroxyindole products into fluorescent derivatives by their reactions with benzylamine in the presence of potassium hexacyanoferrate(III). We detected the derivatives spectrofluorometrically at 480 nm upon excitation at 345 nm. The detection limits (signal-to-noise ratio = 3) of the 5-methoxyindoles were in the range from 12 to 93 fmol per 20-microL injection.     

Sequential molecular vapor elution analysis for the separation and determination of LiCl and NaCl in river waters

The determination of alkali metal chloride in river waters by sequential molecular vapor elution analysis (SMVEA) using a molecular absorption detector (MA) is reported. An improved molybdenum column was developed for SMVEA. An optimum flow rate of carrier gas (pure argon or nitrogen) for separation of metal vapors was 12.0 ml min⁻¹. Lithium chloride and sodium chloride peaks completely separated from potassium, rubidium, and cesium chlorides but CaCl₂, FeCl₂, MgCl₂, and MnCl₂ peaks did not appear at a column temperature of 1000 °C and vaporization temperature of 1000 °C. The appearing order of these metal chlorides was LiCl, NaCl, KCl, RbCl, and CsCl. It was not understood by considering the boiling points of these metal chlorides. The delay of appearing time is due to an interaction between the molecular vapors and inside surface of the column. Under the experimental conditions, the number of theoretical plates was 247 for LiCl and 268 for NaCl in the improved column. Under the optimal experimental conditions, river waters were analyzed for lithium and sodium chlorides. The analytical results agreed well with the recoveries were in the range of 94–105%. By SMVEA, it was found that lithium and sodium chlorides in waters were determined without interference of matrix elements, no chemical treatment for river water samples.     

Easy‐to‐Attach/Detach Solubilizing‐Tag‐Aided Chemical Synthesis of an Aggregative Capsid Protein

A solubilizing Trt‐K₁₀ tag was developed for the effective chemical preparation of peptides/proteins with low solubility. The Trt‐K₁₀ tag comprises a hydrophilic oligo‐Lys sequence and a trityl anchor, and can be selectively introduced to a side chain thiol of Cys of deprotected peptides/proteins with a trityl alcohol‐type introducing reagent Trt(OH)‐K₁₀ under acidic conditions. Significantly, the ligation product in the reaction mixture of a thiol‐additive‐free native chemical ligation can be modified directly in a one‐pot manner to facilitate the isolation of the product by high‐performance liquid chromatography. Finally, the Trt‐K₁₀ tag can be readily removed with a standard trifluoroacetic acid cocktail. Using this easy‐to‐attach/detach tag‐aided method, a hepatitis B virus capsid protein that is usually difficult to handle was synthesized successfully.     

A Ruthenium(III)–Oxyl Complex Bearing Strong Radical Character

Proton‐coupled electron‐transfer oxidation of a Ru^II?OH₂ complex, having an N‐heterocyclic carbene ligand, gives a Ru^III?O^. species, which has an electronically equivalent structure of the Ru^IV=O species, in an acidic aqueous solution. The Ru^III?O^. complex was characterized by spectroscopic methods and DFT calculations. The oxidation state of the Ru center was shown to be close to +3; the Ru?O bond showed a lower‐energy Raman scattering at 732 cm^?1 and the Ru?O bond length was estimated to be 1.77(1) Å. The Ru^III?O^. complex exhibits high reactivity in substrate oxidation under catalytic conditions; particularly, benzaldehyde and the derivatives are oxidized to the corresponding benzoic acid through C?H abstraction from the formyl group by the Ru^III?O^. complex bearing a strong radical character as the active species.     

Water/supercritical CO2 microemulsions with mixed surfactant systems

Phase behavior was investigated for water/supercritical CO 2 (W/scCO2) microemulsions stabilized with sodium bis(1H,1H,2H,2H-heptadecafluorodecyl)-2-sulfosuccinate (8FS(EO) 2) mixed with various guest surfactants. Only for the mixtures with fluorocarbon-hydrocarbon hybrid anionic surfactants (FC6-HC n), the maximum water-to-surfactant molar ratio (W0(c)) was larger than that estimated from linear interpolation of the W0(c) values for pure 8FS(EO) 2 and pure guest surfactant. Fourier transform infrared (FT-IR) measurement for the microemulsion revealed that the mixing of 8FS(EO) 2 with FC6-HC n can prevent a phase transition from the microemulsion to the liquid crystal even in the presence of excess water. It was also found from the measurement of water/scCO 2 interfacial tension that the area occupied per surfactant molecule was markedly increased by the mixing with FC6-HC n. The loose molecular packing, probably due to a microsegregation of 8FS(EO) 2 and FC6-HC n, is consistent with the enhanced stability of the microemulsion upon surfactant mixing.     

Determination of polar organophosphorus pesticides in water samples by hydrophilic interaction liquid chromatography with tandem mass spectrometry

A method combining hydrophilic interaction liquid chromatography (HILIC) with tandem mass spectrometry (MS/MS) was developed for the determination of polar organophosphorus pesticides (OPPs; acephate, methamidophos, monocrotophos, omethoate, oxydemeton-methyl, and vamidothion) in water samples. To extract the polar OPPs and minimize matrix effects from the water sample, an activated carbon cartridge was used for pretreatment. After pretreatment of the water sample, the eluate from the activated carbon cartridge was directly injected into the HILIC/MS/MS system. The OPPs were separated on an Atlantis HILIC silica column by isocratic elution with a mixture of acetonitrile, isopropanol, and ammonium formate buffer as a mobile phase, and they were detected by positive electrospray ionization MS/MS in the selected reaction monitoring mode. The method was validated at 0.05, 0.5, and 5 microg/L levels in water samples, and the recoveries of polar OPPs were between 76.4 and 98.6%. The limits of detection were between 0.13 and 1.0 pg on-column, and the limits of quantification were between 0.43 and 3.4 pg on-column. The method can be applied to the determination of trace amounts of OPPs in environmental water samples.