Rheology of SiO2/(acrylic polymer/epoxy) suspensions. II. Nonlinear stress relaxation

Large deformation, nonlinear stress relaxation modulus G(t, γ) was examined for the SiO₂ suspensions in a blend of acrylic polymer (AP) and epoxy (EP) with various SiO₂ volume fractions (?) at various temperatures (T). The AP/EP contained 70 vol.% of EP. At ??≤?30 vol.%, the SiO₂/(AP/EP) suspensions behaved as a viscoelastic liquid, and the time-strain separability, G(t, γ)?=?G(t)h(γ), was applicable at long time. The h(γ) of the suspensions was more strongly dependent on γ than that of the matrix (AP/EP). At ??=?35 vol.% and T?=?100°C, and ??≥?40 vol.%, the time-strain separability was not applicable. The suspensions exhibited a critical gel behavior at ??=?35 vol.% and T?=?100°C characterized with a power law relationship between G(t) and t; G(t)?∝?t ^???n . The relaxation exponent n was estimated to be about 0.45, which was in good agreement with the result of linear dynamic viscoelasticity reported previously. G(t, γ) also could be approximately expressed by the relation $G(t,\gamma) \propto t^{-n^{\prime}}$ at ??=?40 vol.%. The exponent n ^′ increased with increasing γ. This nonlinear stress relaxation behavior is attributable to strain-induced disruption of the network structure formed by the SiO₂ particles therein.     

Properties of gallium- and aluminum-doped bulk ZnO obtained from single-crystals grown by liquid phase epitaxy

Bulk properties of gallium (Ga)- and aluminum (Al)-doped zinc oxide (ZnO) were studied using bulky single-crystalline thick films grown by liquid phase epitaxy (LPE). The highest possible dopant concentration was 1×10¹⁹ cm^–3 for LPE growth at around 800 °C. The electron concentration was nearly same to the Ga and Al concentrations. The donor binding energy decreased to nearly zero with an increase in dopant concentration, and electron mobility of the sample with relatively high dopant concentration (1×10¹⁹ cm^–3) was more than 60 cm² V^–1 s^–1 at room temperature. The LPE technique is a potential solution for the production of ZnO for optical applications because the well-defined excitonic luminescence could be seen from the LPE-grown-doped single-crystals.     

Swelling-induced Mechanochromism in Multinetwork Polymers

We report a novel and versatile approach to achieving swelling-induced mechanochemistry using a multinetwork (MN) strategy that enables polymer networks to repeatedly swell with monomers and solvents. The isotropic expansion of the first network (FN) provides sufficient force to drive the mechanochemical scission of a radical-based mechanophore, difluorenylsuccinonitrile (DFSN). Although prompt recombination generally occurs in such highly mobile environments, the resulting pink radicals are kinetically stabilized in the gels, probably due to limited diffusion in the extended polymer chains. Moreover, the DFSN embedded in the isotropically strained chain exhibits increased thermal reactivity, which can be reasonably explained by an entropic contribution of the FN to the dissociation. The utility of the MN polymers is demonstrated not only in terms of swelling-force-induced network modification, but also in the context of tunable reactivity of the dissociative unit through proper design of the hierarchical network architecture.     

Synthesis and Mechanical Properties of Polypropylene-based Polymer Hybrids via Controlled Radical Polymerization

Isotactic polypropylene-based graft copolymers linking poly(methyl methacrylate), poly(n-butyl acrylate) and polystyrene were successfully synthesized by a controlled radical polymerization with isotactic polypropylene (iPP) macroinitiator. The hydroxylated iPP, prepared by propylene/10-undecen-1-ol copolymerization with a metallocene/methyl-aluminoxane/triisobutylaluminum catalyst system, was treated with 2-bromoisobutyryl bromide to produce a Br-group containing iPP (PP-g-Br). The resulting PP-g-Br could initiate controlled radical polymerization of methyl methacrylate, n-butyl acrylate and styrene by using a copper catalyst system, leading to a variety of iPP-based graft copolymers with a different content of the corresponding polar segment. These graft copolymers demonstrated unique mechanical properties dependent upon the kind and content of the grafted polar segment.     

New crystalline polymers: poly(2,5‐dialkyl‐1,4‐phenylene oxide)s

New heat‐reversibly crystalline poly‐(alkylated phenylene oxide)s are described. the oxidative polymerization of 2,5‐dimethylphenol catalyzed by (1,4,7‐triisopropyl‐1,4,7‐triazacyclononane) copper dichloride produced poly(2,5‐dimethyl‐1,4‐phenylene oxide), which showed heat‐reversible crystallinity with a high melting point at ca. 300°C, although the isomeric polymer, poly(2,6‐dimethyl‐1,4‐phenylene oxide), never recrystallizes once melted. The polymerization of 2,5‐diethylphenol and 2,5‐dipropylphenol gave the polymers consisting of 1,4‐phenylene oxide units; the latter polymer possessed heat‐reversible crystallinity, however, the former one did not.     

Ring-Opening Polymerization of Ethylene Carbonate Catalyzed with Ionic Liquids: Imidazolium Chloroaluminate and Chlorostannate Melts

Ring-opening polymerization of ethylene carbonate in the presence of ionic liquids, 1-butyl-3-methylimidazolium chloroaluminate melt and 1-butyl-3-methylimidazolium chlorostannate melt, has been investigated. Polymerization takes place accompanied with decarboxylation even at temperatures below 100°C under the reaction conditions selected to give poly(ethylene ether-carbonate)s.