Structures and Reaction Mechanism of Novel Metal-Carbene Complexes Derived from Hypervalent Diazadiselenathiapentalenes

Abstract

Novel metal-carbene complexes (4) with a metallapentalene framework have been obtained from hypervalent diazadiselenathiapentalenes (3) by treating with Pt(PPh₃)₄, Pd(PPh₃)₄ and RhCl(PPh₃)₃. X-Ray investigations revealed that the central hypervalent sulfur atom in 3 was substituted by a metal atom to form M-Se bonds in the resultant metallapentalene framework.     

Abnormal Li diffusion in β-LiGa by the formation of defect complex

The diffusion coefficients of Li in the NaTl-type Li intermetallic compound of β-LiGa have been measured by using a short-lived radioactive diffusion tracer. As the tracer, the α-emitting radioisotope of ⁸Li delivered as the energetic and pulsed beam from Tokai Radioactive Ion Accelerator Complex (TRIAC) was implanted into the β-LiGa compounds with the composition in the range of about 43 to 54 at.% Li. By analyzing the time-dependent yields of the α-particles measured according to the repetition cycle of the beam, the tracer diffusion coefficients were extracted over the wide range of Li composition. Abnormal composition-dependence of Li diffusion coefficients in β-LiGa was observed; the stoichiometric β-LiGa showed the highest diffusivity of Li. By referring to the composition-dependent diffusivity of Li in the iso-structural β-LiAl and β-LiIn, we could identify the abnormal diffusion of Li in very Li-poor composition of β-LiGa. The anomaly has been discussed qualitatively in terms of the formation of defect complex and the interaction between the constitutional defects.     

Synthetic Utilization of α-Phosphonovinyl Anions

The α-phosphonovinyl anions, generated in situ from treatment of β-hetero-substituted vinyl-phosphonates 1a-c with LDA (or LTMP), were trapped with various electrophiles such as chlorotriorganosilanes, chlorotrimethylgermane, chlorotriorganotins, dimethyl disulfide, and halogen to afford the corresponding β-hetero-substituted α-functionalized vinylphosphonates 2–14 in good to excellent yields. The Friedel-Crafts reaction of α-(silyl) or α-(germyl)phosphonoketene dithioacetals 2, 9 or 4 with acid chlorides gave α-acylated phosphonoketene dithioacetals 15–19 in 53–91 % yields. The palladium-catalyzed cross-coupling reaction of β-ethoxy-α-(tributylstannyl)vinylphosphonate 13 with a variety of organic halides (R = acyl, allyl, aryl etc.) provided β-ethoxy-α-substituted vinylphosphonates 20–25 in good to moderate yields. The palladium-mediated cross-coupling reaction of α-(iodo)-vinyl-phosphonates 7, 14 with terminal acetylenes afforded α-alkynylated vinylphosphonates 26–29 in 69–83 % yields.     

Syntheses,Structures, and Reactivities of Sulfur-Containing Cycloalkenes

Sulfur-containing cycloalkenes possessing disulfide units 1, 2, and 3 were obtained by oxidation of cis-disodium ethene-1,2-dithiolate, and their crystal structures were determined by the X-ray crystallographic analyses. Compound 1 was found to give the ring expansion product 3 in acetonitrile even at room temperature and also form reactive thioaldehyde under irradiation.     

Reactions of Thiazolo[3,2-b]-1,2,4-triazolium N-Ylides with Electron-deficient Acetylenes: Novel Benzoyl Migration of Intermediary 1:1-Adducts and Michael Addition to the Acetylenes

Abstract

Reactions of thiazolo[3,2-b]-1,2,4-triazolium N-methylides with electron-deficient acetylenes gave the thiazole ring-opened products as a mixture of the E-and Z-isomers. In contrast, the N-phenacylides reacted with dimethyl acetylenedicarboxylate to give the thiobenzoates together with the thiazole ring-opened products. The mechanism for formation of these compounds is described.     

Fully automated reagent peak‐free liquid chromatography fluorescence analysis of highly polar carboxylic acids using a column‐switching system and fluorous scavenging derivatization

In this study, we combined a column‐switching system with a fluorous scavenging derivatization method to develop a fully automated reagent peak‐free LC fluorescence detection protocol for the analysis of highly polar carboxylic acids. In this method, highly polar carboxylic acids were derivatized with fluorescent 1‐pyrenemethylamine in the presence of 1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide and 1‐hydroxy‐1H‐benzotriazole. Residual excess of the unreacted reagent was tagged with 2‐(perfluorooctyl)ethyl isocyanate and then removed selectively using a fluorous column‐switching system placed in front of an analytical reversed‐phase column. The signal of the fluorous‐tagged unreacted reagent was completely absent in the resulting chromatograms; therefore, it did not interfere with the quantification of each acid especially those eluted before 20 min. The detection limits (S/N = 3) for the examined acids were in the range from 4.0 to 22 fmol per injection. We have applied this method to comparative analysis of highly polar carboxylic acids in urine samples obtained from diabetes mellitus type‐II model mice and their control.     

Electrothermal atomic absorption spectrometric determination of cadmium in environmental samples with niobium wire preconcentration method

A preconcentration method by adsorption of cadmium on a niobium wire was developed for the environmental waters, followed by electrothermal atomic absorption spectrometry with a tungsten tube atomizer. After the preconcentration, the niobium wire was directly inserted into the tungsten tube atomizer. In the preconcentration (adsorption) process of cadmium, the optimal immersing time was 60?s. The effects of large amounts of concomitants on the preconcentration of cadmium were evaluated. When 10³–10⁴ fold excess of matrix elements existed in aqueous solution at pH 4 and 9, the cadmium response was profoundly affected by the matrix elements. However, the cadmium absorption signal was not significantly influenced at pH 7. Therefore, pH 7 was selected for the application into the real environmental samples. Under the optimal conditions, the detection limit (3S/N) for cadmium by the niobium wire preconcentration method was 7.0?pg?mL^?1 and the relative standard deviation was 6.8%. The method with preconcentration on a niobium wire was applied to the determination of cadmium in water and proved to be sensitive, simple and convenient. Because this preconcentration method can be utilized in the in situ treatment of trace cadmium in environmental water samples, it was unnecessary to carry the water samples to the analytical work place. The technique was shown to be useful for the determination of cadmium in environmental water samples at 0.1–1?µg?L^?1 levels.     

Synthesis,Crystal Packing,and Ambipolar Carrier Transport Property of Twisted Dibenzo[g,p]chrysenes

A versatile method for the synthesis of dibenzo[g,p]chrysene (DBC) derivatives based on regio‐ and stereoselective stannyllithiation to diarylacetylenes is described. This method affords a variety of DBCs possessing both electron‐donating and electron‐withdrawing functional groups. These twisted molecules take brickwork packing structures in single crystals. Thus, ambipolar carrier transport properties with mobility values of up to 10^?3 cm² V^?1 s^?1 in the amorphous state were achieved. Functional groups on DBC frameworks are considered to increase carrier mobility through the enhancement of intermolecular interactions in the brickwork packing structures.     

Isotopic dependence of the giant monopole resonance in the even-A 112-124Sn isotopes and the asymmetry term in nuclear incompressibility

The strength distributions of the giant monopole resonance (GMR) have been measured in the even-A Sn isotopes (A=112-124) with inelastic scattering of 400-MeV alpha particles in the angular range 0 degrees -8.5 degrees . We find that the experimentally observed GMR energies of the Sn isotopes are lower than the values predicted by theoretical calculations that reproduce the GMR energies in 208Pb and 90Zr very well. From the GMR data, a value of Ktau = -550 +/- 100 MeV is obtained for the asymmetry term in the nuclear incompressibility.