Screening method for organic aciduria by spectrofluorometric measurement of total dicarboxylic acids in human urine based on intramolecular excimer-forming fluorescence derivatization

A simple screening method of organic aciduria by spectrofluorometric measurement of total dicarboxylic acids in human urine is described. This method is based on an intramolecular excimer-forming fluorescence derivatization with a pyrene reagent, 4-(1-pyrene)butanoic acid hydrazide (PBH). Dicarboxylic acids in urine were converted to the corresponding dipyrene-labeled derivatives by reaction with PBH in the presence of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide and pyridine, and the derivatives afforded intramolecular excimer fluorescence (420-540 nm) which can clearly be discriminated from the normal fluorescence (360-420 nm) emitted from reagent blanks. The technique is so selective that it permits spectrofluorometric measurement of total amount of dicarboxylic acids by the direct derivatization of diluted urine samples. The same reaction mixture has also served as a liquid chromatographic (LC) sample for the separative determination of individual dicarboxylic acids. The spectrofluorometric data did not contradict with the LC data. These methods were usefully applied to preliminary screening test of glutaric aciduria. In conclusion, the present derivatization method allows rapid and direct determination of total amount of dicarboxylic acids in human urine samples.     

Living cationic polymerization of vinyl ethers with a functional group. VII. Polymerization of vinyl ethers with a silyloxyl group and synthesis of polyalcohols and related functional polymers

Living cationic polymerizations of two silicon-containing vinyl ethers, 2-(t-butyldimethyl-silyloxyl)ethyl vinyl ether (tBuSiVE) and 2-(trimethylsilyloxyl)ethyl vinyl ether (MeSiVE), have been achieved with use of the hydrogen iodide/iodine (HI/I₂) initiating system in toluene at ?15 or ?40°C, despite the existence of the acid-sensitive silyloxyl pendants. The living nature of the polymerizations was demonstrated by linear increases in the number-average molecular weights (M?_n) of the polymers in direct proportion to monomer conversion and by their further rise upon addition of a second monomer feed to a completely polymerized reaction mixture. The polymers obtained in these experiments all exhibited very narrow molecular weight distributions (MWD) with M?_w/M?_n around or below 1.1. Desilylation of the polymers under mild conditions (with H⁺ for MeSiVE and F^? for tBuSiVE) gave poly(2-hydroxyethyl vinyl ether), a water-soluble polyalcohol with a narrow MWD. The living processes also permitted clean syntheses of amphiphilic AB block copolymers and water-soluble methacrylate-type macromonomers, all of which bear narrowly distributed segments of the polyalcohol derived from the silicon-containing vinyl ethers.     

Dimerization of methylstyrenes by acetyl perchlorate and trifluoromethanesulfonic acid

Ring-substituted methylstyrenes (p-, m-, and o-methylstyrenes) in conjunction with acetyl perchlorate (AcClO₄) or trifluoromethanesulfonic acid as catalysts gave their linear unsaturated dimer in high yield in benzene at temperatures from 50 to 70°C. In particular, the yield of o-methylstyrene dimer was as high as 90% in the AcClO₄ catalysis at 50°C. The dimer yield depended on solvent and catalyst. The terminal structures of the dimers and higher oligomers were analyzed by NMR spectroscopy. Oligomers with a cyclic terminal structure increased in the products at higher temperature. The dimer yield was improved by codimerizing p-methylstyrene with less reactive m-methylstyrene or styrene with AcClO₄ catalyst. The dimers obtained partly consisted of linear unsaturated codimers.     

Cationic polymerization of cyclic olefins

The polymerization and the polymerizabilities of indene, benzofuran, and 1,2-dihydronaphthalene are discussed from the point of view of ring strain, ring stabilization, and steric hindrance in the transition state. Monomer reactivities of these olefins were estimated from copolymerization with styrene and from the rate of addition of iodine bromide in acetic acid. Rates and degrees of polymerization are compared with monomer reactivities and resonance energies of indene, 1,2-dihydronaphthalene, and benzofuran as a measure of ring strain and stabilization. It is found that indence is 1.5–2.0 times more reactive than styrene. This high reactivity of indene is attributed to the ring strain in the monomer state and to the low amount of steric hindrance in the transition state of the coplanar five-membered cyclic olefin. 1,2-Dihydronaphthalene is strained and therefore reactive, but propagation to higher molecular weight products is impeded due to the steric hindrance. The reactivity of benzofuran is decreased by conjugative stabilization of C?C double bonds at the reaction site.     

Cationic oligomerization of anethole: Selective synthesis of dimers and trimers

A linear unsaturated dimer of anethole [II, (E)-1,3-bis(p-methoxyphenyl)-2-methylpentene-1], was prepared in 98% yield with an acetyl perchlorate (AcClO₄) catalyst in a nonpolar solvent (C₆H₆) at a high temperature (70°C). At 0°C a linear unsaturated trimer was formed in high yield with dimer II. The geometric structure of the linear unsaturated dimers was determined by analysis of the nuclear Overhauser effect (NOE) on their ¹H-NMR spectra. NOE analysis showed that at 0°C with AcClO₄, trans-anethole gives the (E)-form (II), whereas cis-anethole yields the (Z)-form. On the other hand, with a metal-halide catalyst (BF₃OEt₂) a cyclic dimer and a cyclic trimer were produced in high yields in a polar solvent [(CH₂Cl₂)] at 70°C; higher oligomers (≥ tetramer) were scarcely formed. The effect of catalysts on the structure of oligomers was explained in terms of the interaction between a growing carbocation and a counterion.     

Kunzeanones A, B, and C: novel alkylated phloroglucinol metabolites from Kunzea ambigua

Three new metabolites, kunzeanones A (1), B (2), and C (3), along with three known compounds, cryptostrobin (4), (+)-spathulenol (5), and (−)-globulol (6), were isolated from the non-polar fraction of the dried leaves of Kunzea ambigua (Myrtaceae), which shows ichthyotoxicity toward a small fish, medaka. The structures of these new compounds were elucidated as condensates of alkylated phloroglucinol with methylflavanone and germacrane-type sesquiterpene, respectively, on the basis of spectral analyses including 1-D and 2-D NMR spectra. The stereochemistries of kunzeanones A and B were determined by X-ray crystallographic analysis. A sesquiterpene, (+)-spathulenol (5), among the isolates was characterized as the ichthyotoxic principle of the extract.     

Rates of polymer formation and monomer consumption in the solution polymerization of trioxane catalyzed by BF3 · O(C2H5)2

In the solution polymerization of trioxane catalyzed by BF₃ · O(C₂H₅)₂ at 30°C. the amount of the methanol-insoluble polyoxymethylene is less than the amount of monomer consumed. This difference was much larger than the amount of formaldehyde determined in the polymerized system and could not also be explained in terms of the amount of the methanol-soluble oligomer. Tetraoxane was detected in large quantities by gas chromatography in the polymerized solution of trioxane. Therefore, the difference between the amounts of the methanol-insoluble polymer and the monomer consumed was ascribed partly to the formation of tetraoxane. In spite of the fact that tetraoxane was polymerized more easily than trioxane by BF₃ · O(C₂H₅)₂, an almost constant amount of tetraoxane was produced, independent of the kind of solvent and the polymer yield. This suggests the existence of an equilibrium concentration of tetraoxane. On the other hand, the formation of trioxane was observed in the solution polymerization of tetraoxane by BF₃ · O(C₂H₅)₂. This suggests that the formation of tetraoxane during the trioxane polymerization is due to a back-biting reaction in which the growing chain end of trioxane attacks the oxygen atom in its own chain with depolymerization of tetraoxane.     

Synthesis of end-functionalized polystyrenes with organosilicon end-capping reagents via living cationic polymerization

The end-functionalization of living polymers with bases (methanol, benzylamine, diethyl sodiomalonate, and sodium methoxide) and organosilicon compounds [X ? Si(CH₃)₃;X ? : CH₂?C(CH₃)COO? , CH₃COO? , CH₂?CHCH₂? , C₆H₅? ] was investigated in the living cationic polymerization of styrene initiated with the 1-phenylethyl chloride/SnCl₄/nBu₄NCl system in CH₂Cl₂ at ?15°C. The four bases and C₆H₅SiMe₃, independent of their structures, were apparently incapable of reacting with the living end and invariably led to polystyrenes with the ω-end chlorine [～ ～ ～ CH₂CH(Ph)Cl] originated from the initiating system. The number-average end-functionality (F?_n) of the chloride, determined by ¹H-NMR, was close to unity (F?_n > 0.9). The presence of chlorine in the polymer was also confirmed by elemental analysis. In contrast, the quenching by the trimethylsilyl compounds with X = methacryloxy, acetoxy, and allyl gave ω-end-functionalized polystyrenes with the corresponding terminal groups (X) for which the F?_n values were close to unity (F?_n > 0.9). The effects of the structure of silyl compounds on end-capping are also discussed. © 1994 John Wiley & Sons, Inc.     

Cationic copolymerization of phenyl propenyl ethers

Ring-substituted phenyl propenyl ethers were found to form homopolymers without any rearrangement by metal halides. Phenyl propenyl ethers were less reactive than the corresponding phenyl vinyl ethers in cationic polymerization. In order to study the electronic effect of a substituent on the reactivity, cis-p-Cl,p-CH₃, and p-CH₃O-phenyl propenyl ethers were copolymerized with phenyl propenyl ether in methylene chloride at ?78°C with stannic chloride–trichloroacetic acid, and their ¹H- and ¹³C-NMR spectra were measured. The reaction constant ρ against Hammett σ_p was ?2.1. The cis-phenyl propenyl ethers were slightly more reactive than the corresponding trans isomers. On the other hand, an o-methyl group decreased the reactivity of phenyl propenyl ether. The low reactivity of o-methyl phenyl propenyl ether was attributed to the steric hindrance between the propagating carbocation and the monomer.     

Effect of Static Magnetic Field on Photocatalytic Degradation of Methylene Blue over ZnO and TiO2 Powders

Magnetic field effects (MFEs) on photocatalytic degradation of methylene blue (MB) solution over ZnO and TiO₂ powders are investigated under static magnetic field up to 0.7 T with light irradiation by ultraviolet (UV) light emitting diode. The UV–visible-near-infrared spectrometer is used to monitor the MB concentrations. The positive MFE is observed for ZnO, while the negative MFE for TiO₂, and both MFEs are increased with the increase in the magnetic field applied. By increasing the settling time (the time interval between the preparation of MB solution and the powder dispersion into the MB solution), the photodegradation abilities under MFEs are decreased for both the catalysts. The cause of MFE is discussed in terms of dissolved oxygen in the MB solution and magnetic adsorption of the constituent molecules.