Significant Difference in Semiconducting Properties of Isomeric All‐Acceptor Polymers Synthesized via Direct Arylation Polycondensation

The direct arylation polycondensation (DArP) appeared as an efficient method for producing semiconducting polymers but often requires acceptor monomers with orienting or activating groups for the reactive carbon‐hydrogen (C‐H) bonds, which limits the choice of acceptor units. In this study, we describe a DArP for producing high‐molecular‐weight all‐acceptor polymers composed of the acceptor monomers without any orienting or activating groups via a modified method using Pd/Cu co‐catalysts. We thus obtained two isomeric all‐acceptor polymers, P1 and P2, which have the same backbone and side‐chains but different positions of the nitrogen atoms in the thiazole units. This subtle change significantly influences their optoelectronic, molecular packing, and charge‐transport properties. P2 with a greater backbone torsion has favorable edge‐on orientations and a high electron mobility μ_e of 2.55 cm² V^?1 s^?1. Moreover, P2‐based transistors show an excellent shelf‐storage stability in air even after the storage for 1 month.     

Polymerization of Acrolein by Imidazole

Polymerization of acrolein(AL) in the presence of imidazole(Im) has been investigated in tetrahydrofuran or methanol below room temperature. The polymers obtained, white or pale yellow powders, were found to be composed of vinyl polymer with one Im group attached and having an aldehyde side chain, of which 70–80 mole % of the aldehyde revealed bridge structure. The number-average molecular weight (M _n) of these polymers was determined to be in the range of 317 to 691. The rate of polmerization R_p was expressed by the equation, R + k[Im] [AL]².

The addition of water or dimethyl sulfoxide accelerated the polymerization reaction, while the presence of benzaldehyde or N,N'-dimethylformamide decreased R_p. The structure of addition products in the initial polymerization step was confirmed by IR and NMR spectra, and the observations of polymerization system was carried out by UV and NMR spectra. The polymerization mechanisms were discussed on the basis of these results.     

Polymerization of N,N-Dimethylaminopropyl-Acrylamide Through Hydrogen Transfer Induced by the Propagation of the Polyacrolein Anion

The anionic polymerization of acrolein (AL) with N, N-dimethylamino-propylacrylamide (DMAPA) in the presence of water was investigated in tetrahydrofuran, benzene, and ethanol at 0°C in a nitrogen atmosphere. The resulting polymers were found to be essentially vinyl polymers with one DMAPA attached and an aldehyde side chain. From observations of the polymerization process by ¹H NMR, we find that polymerization was initiated by the hydroxyl anion formed in the thermodynamic equilibrium between the amine of DMAPA and water. The hydrogen transfer reaction of DMAPA was caused by the propagating poly-AL anion. On the other hand, the monomer reactivity ratios and the Q₂-e₂values of DMAPA were determined by the free-radical copolymerization of styrene (St, M₁) with DMAPA and AIBN as initiator.     

Kinetics of the Copolymerization of Methyl Vinyl Ketone and Acrylamide Initiated by the Adduct of Methyl Vinyl Ketone and Imidazole

N-(Butyl-3-one)imidazole acts as an initiating adduct which is formed in the anionic polymerization of methyl vinyl ketone (MVK) induced by imidazole (Im) and is directly formed from Im and the MVK monomer. The kinetics of the anionic homopolymerization of MVK and acrylamide (AAm) under argon in the presence of the adduct were investigated in tetrahydrofuran (THF). The rate of polymerization for the MVK system is expressed as R_p = k[Adduct] [MVK], where k = 3.1 × 10^?6 L/(mol·s)in THF at 30°C. The overall activation energy, E_a , was found to be 5.34 kcal/mol. The R_p for the AAm system is expressed as R_p = k[Adduct] [AAm], where k = 6.8 × 10^?6 L/(mol·s) in THF at 30°C, with E_a 7.78 kcal/mol. The mechanism of the polymerization induced by the initiator adduct is discussed on the basis of these results.     

Organochlorine Pesticides in Water,Sediment and Fish from the Nile River and Manzala Lake in Egypt

Abstract

To assess the risks of organochlorine pesticides discharged into the hydrospheric environment of Egypt, river and lake water, drinking water, suspended solids, sediments and fish were collected during 1993—1994 from the Nile River and Manzala Lake in Egypt and were transported to Japan for chemical analysis. Among different organochlorine pesticides analyzed, p,p′-DDE was the most predominant in fish (7.6 to 67 ng/g wet wt.), sediments (3.2 to 432 ng/g dry wt.) and suspended solids (5.3 tc 138 pg/L). However, in the dissolved phase of water samples HCH compounds predominated (α-HCH, 71 to 2,815 pg/L). Concentrations of organochlorine pesticides, except chlordane, were higher in Manzala Lake than in the River Nile. Concentrations of organochlorine pesticides in fish corresponded with those in sediments from each location. Comparison of organochlorine concentrations in Nile River water with those reported in earlier studies suggested a decrease in concentrations during the last decade. However, concentrations of p,p′-DDE has increased in fish. It appears that the release of this metabolite from contaminated sediment is the major source of p,p′-DDE in fish during recent years.     

Synthesis of a novel potential tridentate anthracene ligand, 1,8-bis(dimethylamino)-9-bromoanthracene,and its application as chelate ligand for synthesis of the corresponding boron and palladium compounds

A novel potential tridentate ligand, 1,8-bis(dimethylamino)-9-bromoanthracene, was synthesized. The key steps are as follows: 1) dimethylamination of 1,8-dibromo-9-methoxyanthracene by a modified Buchwald's method to afford 1,8-bis(dimethylamino)-9-methoxyanthracene, and 2) reduction of the methoxy group by LDBB (lithium di-tert-butylbiphenylide) followed by treatment with BrCF2CF2Br. The corresponding 1,8-bis(dimethylamino)-9-lithioanthracene, which should be a useful versatile tridentate ligand, could be generated by treatment of the bromide with one equivalent of nBuLi. The lithioanthracene reacted with B-chloroborane derivatives to give three 9-boryl derivatives. Although we recently reported that the crystal structure of 1,8-dimethoxy-9-B-catecholateborylanthracene was a symmetrical compound with the almost identical two O-B distances (2.379(2) and 2.441(2) A), the newly prepared 1,8-bis(dimethylamino)-9-borylanthracene derivatives clearly have unsymmetrical structures with coordination of only one NMe2 group toward the central boron atom. However, the energy difference between the unsymmetrical and symmeterical structures was found to be very small based on 1H NMR measurements, in which symmetrical anthracene patterns in the aromatic region (two kinds of doublets and a triplet) and a sharp singlet signal of the two NMe2 groups were observed even at -80 degrees C. 1,8-Bis(dimethylamino)-9-bromoanthracene itself can be a versatile ligand for transition metal compounds. In fact, direct palladation of the bromide took place by the reaction with [Pd2(dba)3].CHCl3 in THF to give the 9-palladated product. X-ray crystallographic analysis of the Pd compound showed that the square planar palladium atom was coordinated in a symmetrical fashion by both NMe2 groups (Pd-N bonds are 2.138(5) and 2.146(5) A).     

Temperature dependence of free volume of polyacrylamide gels studied by positron lifetime measurements

Changes of positronium (Ps) cavity radii in polyacrylamide and poly(N-isopropylacrylamide) gels were studied from 120 to 300 K by positron lifetime technique and it has been shown that the Ps cavity radius in the hydrogels changes by three or four stages. Temperature dependence of the Ps cavity radius exhibits variations similar to common polymers around the glass transition temperature. Hydrophilicity of the polymer chains significantly affects the Ps cavity radius just below 273 K. These results suggest an important role of free volume on the state of water in hydrogels.     

Generation of NH-azomethine imine intermediates through the 1,2-hydrogen shift of hydrazones and their intermolecular cycloaddition reaction with olefinic dipolarophiles

The thermal 1,2-hydrogen shift of the hydrazone generates the NH-azomethine imine intermediate in the 4-oxo-4H-pyrido[1,2-a]pyrimidine-3-carbaldehyde system under mild conditions. Therein, the resulting NH-azomethine imine should be stabilized by forming an internal hydrogen bond with the carbonyl oxygen at the 4-position. Its smooth stereoselective intermolecular cycloaddition reaction with olefinic dipolarophiles giving pyrazolidine derivatives is discussed.     

Synthesis and photoluminescence study of anthracene based dendrimer and dendron

A new type of polyaromatic dendrimer composed of six anthracene groups was synthesized, which showed a monomeric fluorescence feature with a diminished quantum yield due to intramolecular self-quenching processes in the dendritic framework.