Enhanced indoor radon concentration by using radon-rich well water in a Japanese wooden house in Fukuoka, Japan

Summary Radon measurements were carried out in a Japanese wooden house built on granitic geology, where radon-rich well water is used. Atmospheric radon concentrations were measured over one year with passive integrated radon monitors. The monitors were distributed at several locations in the house and were replaced every two months. In order to confirm the diurnal variation and heterogeneous distribution of radon, short-term measurements were carried out accordingly. Radon, its decay products and terrestrial gamma-radiations were measured in this survey. From the long-term measurement, the radon concentration in the house ranged from 14 to 184 Bq^. m^-3with an arithmetic mean of 45 Bq^. m^-3. A radon concentration of 184 Bq^. m^-3was observed in the bathroom in spring (March-May) though the radon level was normal in the living room and bedroom. In order to characterize the house, similar measurements were conducted in several surrounding houses. There was a significant difference in radon concentration between the investigated houses. There was a spatial distribution of the radon concentration and the highest value was found in the bathroom. Radon and its decay products concentrations varied with time, which increased from midnight to morning whereas they decreased during daytime. Although the radon concentration in tap water was 1 Bq^. l^-1, a high level of 353 Bq^. l^-1was found in the well water.While well water was being used, the indoor radon concentration near the bathroom increased rapidly with a maximum value of 964 Bq^. m^-3. It is clear that the use of well water enhanced the radon level around the bathroom.     

Ambident reactivity of the thiocyanate anion revisited: can the product ratio be explained by the hard soft acid base principle?

Laser flash photolysis and stopped-flow methods have been employed to determine the kinetics of the reactions of benzhydrylium ions with both termini of the thiocyanate ion. In contrast to previous investigations which reported sulfur/nitrogen ratios of k(S)/k(N) = 2-10 for the reactions of carbocations with SCN(-), values of k(S)/k(N) = 10(3)-10(4) are now derived from absolute rate constants. This discrepancy is explained by the fact that the data determined in this investigation are the first which refer to activation-controlled attack of carbocations at both termini of the thiocyanate ion, while previous reactivity ratios included diffusion-controlled reactions. It is concluded that the selectivities of the reactions of carbocations with the thiocyanate ion cannot be explained by the hard soft acid base principle.     

OXIDATIVE DEGRADATION OF LIGNIN BY PHOTOCHEMICAL AND CHEMICAL RADICAL GENERATING SYSTEMS

Oxidation of specifically radiolabeled ¹⁴C-lignins by UV/H₂0₂. Fenton's reagent, photosesitizing riboflavin. UV- and γ-irradiation was examined. In the presence of UV/H₂O₂, a hydroxyl radical (·OH) generating system. ¹⁴C-methoxy. 2-[¹⁴C-sidechain] and ¹⁴C-ring labeled lignin were rapidly and extensively degraded as measured by gel filtration of the reaction products on Sephadex LH-20. This suggested that exposure to OH leads to rapid, nonspecific lignin degradation. Rapid degradation of 14C-methoxy, 2-[¹⁴C-sidechain] and ¹⁴C-ring labeled lignin also occurred in the presence of the ·OH generating system, Fenton's reagent, confirming the primary role of ·OH in these reactions. Photosensitizing riboflavin, also capable of effecting transformation of organic compounds via Type I hydrogen radical abstractions, caused extensive oxidative degradation of ¹⁴C-methoxy labeled lignin and significant degradation of 2-(¹⁴C-sidechain] and ¹⁴C-ring labeled lignin. In addition, UV- and γ-irradiation caused slower but extensive degradation of the polymers, probably via radical type mechanisms. All of these results indicate that ·OH as well as organic radical generating systems are effective agents for the purpose of degrading this heterogeneous, optically inactive and random biopolymer.     

Evaluation of thyroid scintigraphy in small animals

Thyroid scintigraphy in rats and mice with 99mTc and 123I was attempted to examine whether this modality might be used in small animals and to describe the possibilities of its application in examining experimentally produced thyroid diseases. A human gamma camera with a pinhole collimator improved for small animals was used for imaging. Thyroid images with 99mTc were obtained 20 minutes after injection and those with 123I were 24 hours after administration. All the scintigrams, although those obtained from mice with 99mTc displayed overlapped salivary gland images, demonstrated sufficiently clear images in size and shape, which showed that thyroid scintigraphy in small animals should be applicable in examining experimentally produced thyroid diseases.     

Substoichiometric precipitation of silicon as barium fluorosilicate

Distillation and substoichimetric precipitation for silicon have been developed for the determination of trace amounts of silicon. It is based on substoichiometric precipitation as barium fluorosilicate and the distillation of silicon tetrafluoride. The separation has been applied for the determination of silicon in gallium arsenide and NBS steel as standard reference material.     

Synthesis of (-)-aphanorphine using aryl radical cyclization

[structure: see text] The synthesis of (-)-aphanorphine was achieved by using Bu(3)SnH-mediated aryl radical cyclization of 1-benzyloxycarbonyl-2-(2-bromo-4-methoxyphenylmethyl)-2-methoxycarbonyl-4-(phenylthiomethylene)pyrrolidine, leading to exclusive formation of the 6-exo cyclization product.     

Copolymerization of butadiene and styrene with a gadolinium tricarboxylate catalyst

Homo- and copolymerizations of butadiene (BD) and styrene (St) were carried out by gadolinium catalysts having various tricarboxylate ligands [Gd(OCOR)₃: R = CH₃, CH₂Cl, CHCl₂, CCl₃, and CF₃], to investigate the effects of ligands and discuss the cis polymerization mechanism. Polymerization of BD with Gd(OCOR)₃—(i—Bu)₃Al—Et₂AlCl catalysts was carried out in hexane at 50°C. By each catalyst, poly(BD) having a high cis content (cis = 97–99%) in 22–85% yields for 2–24 h were obtained. The ligands with low pKa values increased the polymerization activity as follows: R of Gd(OCOR)₃: CF₃ > CCl₃ > CHCl₂ > CH₂Cl ～ CH₃. On the other hand, in the polymerization of St or copolymerization of BD and St under similar conditions, the highest activity was attained by a Gd(OCOCCI₃)₃- based catalyst. The difference in the optimum ligand among the homo- and copolymerization of BD and St was discussed on the basis of energy levels of the catalysts. In the copolymers of BD and St, the cis-1,4 content of the BD unit decreased with increasing St content. Furthermore, according to the diad analysis of copolymers (St content ～ 14.5 mol %) by ¹³C NMR spectroscopy, the low cis value of the BD unit was observed in the St-BD diad (cis/trans/vinyl = 24/53/23), while the high cis value of the BD unit remained in the BD-BD diad (cis/trans/vinyl = 89/10/1). These results suggest that the terminal BD unit is controlled by the cis configuration by the coordination between the penultimate cis vinylene unit and the gadolinium metal catalyst, whereas the presence of the penultimate St unit interferes with cis polymerization of the terminal BD unit. The difference in the coordination mechanism in the course of polymerization between rare earth metal and transition metal catalysts such as the Ni(acac)₂ and Co(acac)₃-based catalyst was also discussed. © 1995 John Wiley & Sons, Inc.     

A concept for controlling singlet oxygen (1 Delta g) yields using nitroxide radicals: phthalocyaninatosilicon covalently linked to nitroxide radicals

In this study, we have investigated the singlet oxygen ((1)Delta(g)) generation mechanism using phthalocyaninatosilicon (SiPc) covalently linked to nitroxide radicals (NRs), and we succeeded in increasing the singlet oxygen quantum yield (Phi(Delta)) by linking the NRs. This originates from both an increase in the triplet quantum yield and excited-state lifetimes long enough to utilize photochemical reactions. Because the electron exchange interactions with paramagnetic species were known to result only in very fast excited-state relaxation, leading to a decrease in photochemical reaction yields, this increase in Phi(Delta) is an unusual and precious example for increasing photochemical reaction yields by electron exchange interactions with paramagnetic species. In addition, our experiments and theoretical analyses show that the spin-selective energy transfer rate constant is not influenced by linking the NRs and can be evaluated by the product of spin-statistical factors and matrix elements between the initial and final states.     

Oxysulfide Sm(2)Ti(2)S(2)O(5) as a stable photocatalyst for water oxidation and reduction under visible light irradiation (lambda < or = 650 nm)

A Ti-based oxysulfide, Sm(2)Ti(2)S(2)O(5), was studied as a visible light-driven photocatalyst. Under visible light (440 nm < or = lambda < or = 650 nm) irradiation, Sm(2)Ti(2)S(2)O(5) with a band gap of approximately 2 eV evolved H(2) or O(2) from aqueous solutions containing a sacrificial electron donor (Na(2)S-Na(2)SO(3) or methanol) or acceptor (Ag(+)) without any noticeable degradation. This oxysulfide is, therefore, a stable photocatalyst with strong reduction and oxidation abilities under visible-light irradiation. The electronic band structure of Sm(2)Ti(2)S(2)O(5) was calculated using the plane-wave-based density functional theory (DFT) program. It was elucidated that the S3p orbitals constitute the upper part of the valence band and these orbitals make an essential contribution to the small band gap energy. The conduction and valence bands' positions of Sm(2)Ti(2)S(2)O(5) were also determined by electrochemical measurements. It indicated that conduction and valence bands were found to have satisfactory potentials for the reduction of H(+) to H(2) and the oxidation of H(2)O to O(2) at pH = 8. This is consistent with the results of the photocatalytic reactions.     

Diffusion coefficients of positronium in polycarbonate at low temperatures

Diffusion coefficients of positronium (Ps) in polycarbonate (PC) have been determined at temperatures between 20 and 300 K by means of positron lifetime spectroscopy. 2,2-dinitrobiphenyl (DNB) was added to the polymer as a Ps quencher and the diffusion coefficients were determined from measured Ps quenching rate constants, assuming that the reaction between Ps and DNB is completely diffusion-controlled.