Improved surface morphology of flow-modulated MOVPE grown AIN on sapphire using thin medium-temperature AIN buffer layer

High-temperature (HT) AIN films were grown on (0 0 0 1) sapphire by low-pressure flow-modulated (FM) metal organic vapor phase epitaxy (MOVPE) with and without inserting a thin medium-temperature (MT) AIN layer. To suppress parasitic reactions between the sources of trimethylaluminum (TMA) and ammonia (NH₃), TMA and NH₃ was introduced to the reactor of MOVPE by alternating supply way. Surface morphology and crystalline quality were characterized by a scanning electronic microscopy (SEM), atomic force microscopy (AFM) and X-ray rocking curve (XRC) measurements of (0 0 0 2) and (10-12) diffractions. The AFM and SEM measurements indicated that the thin MT-AIN layer had a strong influence on the surface morphology of the HT-AIN films. The surface morphology became quite smooth by inserting the thin MT-AIN layer and surface RMS roughness values were 0.84 nm and 13.4 nm for the HT-AIN films with and without inserting the thin MT-AIN buffer layer, respectively. By etching the samples in aqueous KOH solution, it was found that the polarity of AIN films was different, the HT-AIN film with the thin MT-AIN layer could not be etched, indicating that the film had an Al-polar surface; however, the film without the MT-AIN layer was etched, which was explained that that film had a N- or mixed-polar surface. The mechanism for the origin of the different polarity of HT-AIN with and without the thin MT-AIN layer was proposed and discussed in detail.     

Influence of C60 Aggregation on Pseudorotation in the Excited Triplet State Probed by Multifrequency Time-Resolved EPR

The influence of C₆₀ aggregation on time-resolved (TR) electron paramagnetic resonance (EPR) of C₆₀ in the excited triplet state was investigated by multifrequency EPR techniques. Temperature-independent X-band (9.7 GHz) TR-EPR spectra were observed in a fresh toluene solution, while temperature-dependent ones were reported in literatures. The experimental spectra in this study indicated that the pseudorotation of pristine C₆₀ in frozen toluene solution is not frozen out even at lower temperatures. Careful investigations of TR-EPR and its decay kinetics demonstrated that the pseudorotation can be affected by C₆₀ aggregation. A comparison between X- and W-band (94.9 GHz) results indicated that the aggregation can be accelerated by a capillary effect. Three decay constants were extracted from the analysis of the decay kinetics. The fastest component was ascribed to the pseudorotation, which was independent of temperature in the range of 10–40 K. The temperature dependences of the decay kinetics showed that the pseudorotation is not affected by C₆₀ aggregation at higher temperatures.     

On a Lift of an Individual Stable Equivalence to a Standard Derived Equivalence for Representation-Finite Self-injective Algebras

We shall show that every stable equivalence (functor) between representation-finite self-injective algebras not of type (D _3m ,s/3,1) with m2, 3s lifts to a standard derived equivalence. This implies that all stable equivalences between these algebras are of Morita type.     

Effect of ultrasonic irradiation on nucleation phenomena in a Na2HPO4.12H2O melt being used as a heat storage material

The effect of ultrasound on nucleation phenomena in the heat storage material Na2HPO4.12H2O was investigated by determining the primary nucleation probability and induction time, and by looking at heat generation phenomena in the initial stage of nucleation. The experimental results show that the primary nucleation probability dramatically increased, and the induction time decreased under the ultrasound irradiation, and in addition, the rate of temperature rise was dependent upon the ultrasonic output. Based on these results and the theoretical relationship between the number of primary nuclei and the heat generation rate, it is proposed that the number of primary nuclei depends upon the ultrasonic output.     

Influence of bubble clustering on multibubble sonoluminescence

Influence of clustering of cavitation bubbles on multibubble sonoluminescence (MBSL) in standing wave fields is studied through measurement of MBSL intensity with a photomultiplier tube and observation of corresponding bubble behavior with a high-speed video camera and an intensified charge-coupled device one. It is clarified that, when the SL is quenched suddenly at excessive ultrasonic power, the behavior of bubbles clearly changes; the bubbles which form dendritic branches of filaments change into clusters due to the secondary Bjerknes force. The cluster is composed of several bubbles surrounded by many tiny bubbles, in which bubbles repeatedly coalesce and fragment, and run away from pressure antinodes. When the clusters are broken up by forced fluid motion, the quenching of MBSL is suppressed.     

Microencapsulation of TiO2 Nanoparticles with Polymer by Rapid Expansion of Supercritical Solution

A novel preparation method is reported for the microencapsulation of TiO₂ nanoparticles by rapid expansion of supercritical solution with a nonsolvent. A suspension of TiO₂ nanoparticles in carbon dioxide containing a cosolvent and dissolved polymer is sprayed through a nozzle to atmospheric pressure. After rapid expansion, polymer microspheres were obtained. The microspheres do not tend to agglomerate, since the pure cosolvent is a nonsolvent for the polymer. The structure and morphology of microspheres were investigated by SEM, TEM and XRD. The obtained polymer microspheres are microcapsules of TiO₂ nanoparticles. The mean particle diameter and particle size distribution of microcapsules, could be controlled by changing the polymer concentration, pre-expansion pressure, temperature and injection distance. The polymer feed compositions are more effective than other factors on the control of particle size.     

Analysis of the nuclear quadrupole interaction of Disulfur Dichloride, S2Cl2

Pure rotational spectra of S₂³⁵Cl₂ and S₂³⁵Cl³⁷Cl have been observed using a Fourier-transform microwave spectrometer. An analysis of the hyperfine structure made by considering the nuclear spin statistics showed that S₂Cl₂ has C₂symmetry, where the hyperfine splittings due to the two Cl nuclei were analyzed precisely. The nuclear quadrupole coupling constants including the off-diagonal (χ_ab, χ_ac, χ_bc) components and the nuclear spin–rotation interaction constants associated with the two Cl nuclei have been determined for the first time. We have shown that the nuclear quadrupole interaction plays an important role in the ortho–para mixing.     

Blue emission from InGaN/GaN hexagonal pyramid structures

Cathodoluminescence (CL) from InGaN grown on GaN hexagonal pyramid structures has been investigated. The facet structure can be controlled by the growth temperature and reactor pressure. GaN pyramid structures surrounded with facets were grown at 1020 C at a pressure of 500 Torr by low-pressure metalorganic vapor phase epitaxy (LP-MOVPE). The indium mole fraction in the InGaN film depends on the facet structure. The thickness of the InGaN and the peak wavelength and intensity of the CL from the InGaN gradually increased from the bottom to the top of the facets.     

Beam-polarization asymmetries for the p(gamma-->, K+)Lambda and p(gamma-->, K+)Sigma(0) reactions for E(gamma)=1.5-2.4 GeV

Beam polarization asymmetries for the p(gamma-->,K+)Lambda and p(gamma-->,K+)Sigma(0) reactions are measured for the first time for E(gamma)=1.5-2.4 GeV and 0.6相似文献   

Enormously extended π-electronic conjugation system of dimeric octaethylporphyrin transmitted with anthracene

Based on the fact that anthracene (Anth) possesses much higher similarity in electron-releasing ability to porphyrin nucleus than the other polyacenes, the dimeric octaethylporphyrin (OEP) derivatives 4 and 5 (OEP–Anth–OEP) were synthesized and their structure–property relationships were examined, as compared with related OEP dimers 1–3. Among them, the derivative 4 showed enormously high electronic communication between two terminal OEP rings, potentially providing a suitable unit of the electronic structure for molecular design of the OEP devices operating with less energy and with higher sensitivity to outside stimuli.