Double-chelation-assisted Rh-catalyzed intermolecular hydroacylation between salicylaldehydes and 1,4-penta- or 1,5-hexadienes

Intermolecular hydroacylation between salicylaldehydes 1, 26-40 and 1,4-penta- or 1,5-hexadienes 4-13 by Rh-catalyst proceeded under mild reaction conditions to give a mixture of iso- and normal-hydroacylated products 14-25, 41-55, and 57-60. In the hydroacylation reaction, chelation of both salicylaldehyde and diene to the Rh-complex plays a crucial role. The ratio of iso- and normal-hydroacylated products could be regulated by the addition of salicylic acid or amines. The effects of various Rh-complexes, solvents, and additives were examined, and the plausible mechanisms of the catalytic cycle were proposed on the basis of the deuterium-labeling salicylaldehyde experiments.     

Preparation and properties of aromatic polyamides and copolyamides from phenylindanedicarboxylic acid and aromatic diamines

Aromatic polyamides (aramids) having inherent viscosities of 0.5–1.10 dL/g were prepared by the direct polycondensation of 1,1,3-trimethyl-3-(4-carboxyphenyl)indane-5-carboxylic acid with various aromatic diamines using triphenyl phosphite and pyridine as the condensing agents. Copolyamides were also prepared by a similar procedure from a mixture of the phenylindane diacid, terephthalic acid, and p-phenylenediamine. Almost all of the aramids were soluble in a variety of solvents such as N-methyl-2-pyrrolidone, pyridine, and m-cresol, and afforded transparent and tough films by the solution casting. These aramids and copolyamides had glass transition temperatures in the range of 290–355°C, and started to lose weight at 340°C in air.     

Synthesis and characterization of novel aromatic polyamides from 3,4-bis(4-aminophenyl)-2,5-diphenylfuran and aromatic diacid chlorides

A new highly phenylated heterocyclic diamine, 3,4-bis(4-aminophenyl)-2,5-diphenylfuran, was synthesized in three steps from 4–-nitrodeoxybenzoin. The low temperature solution polycondensation of the diamine with various aromatic diacid chlorides afforded tetraphenylfuran-containing aromatic polyamides with inherent viscosities of 0.2–0.8 dL/g. Copolyterephthalamides were obtained from the diamine and 4,4′-oxydianiline. The polyamides were generally soluble in a wide range of solvents that included N,N-dimethylacetamide, N-methyl-2-pyrrolidone, pyridine, and m-cresol. Glass transition temperatures of the polyamides and copolyamides ranged from 302–342°C, and 10% weight loss was observed above 480°C in nitrogen.     

Fabrication of mesoporous ZnO nanosheets from precursor templates grown in aqueous solutions

Mesoporous ZnO nanosheets were successfully prepared by pyrolytic transformation of zinc carbonate hydroxide hydrate, Zn₄CO₃(OH)₆·H₂O. The nanosheets were initially formed as assemblies on glass substrates during chemical bath deposition (CBD) in aqueous solutions of urea and zinc acetate dihydrate, zinc chloride, zinc nitrate hexahydrate, or zinc sulfate heptahydrate at 80°C. It was key to induce heterogeneous nucleation of Zn₄CO₃(OH)₆·H₂O by promoting a gradual hydrolysis reaction of urea and controlling the degree of supersaturation of zinc hydroxide species. Morphology of Zn₄CO₃(OH)₆·H₂O was largely influenced by the anions present in the CBD solutions. The Zn₄CO₃(OH)₆·H₂O nanosheets were transformed into wurtzite ZnO by heating at 300°C in air without losing the microstructural feature.     

Single-bubble sonochemiluminescence in aqueous luminol solutions

Sonochemiluminescence (SCL) of luminol due to a single bubble is studied through spectral measurement. No SCL was observed from a stable single bubble that emitted high-intensity sonoluminescence (SL). In contrast, SCL was observed under conditions of an unstable dancing bubble, where a bubble grows and ejects tiny bubbles, making it "dance" by counteraction. Furthermore, SCL was observed from dancing bubbles even when SL was not observed, depending on the dissolved gas content. The instability of bubble collapse is the key parameter governing SCL.     

Synthesis of benzylidene-pendant polyphthalimidines from flexible bisphthalides and various diamines

New polyphthalimidine-forming monomers, 5,5′-(oxydi-p-phenylenedicarbonyl)bis(3-benzylidenephthalide) and the 6,6′-derivative, were synthesized by the Friedel–Crafts reaction of diphenyl ether with 5- and 6-chloroformyl-3-benzylidenephthalide, respectively. The direct polycondensation of these bisphthalides with both aliphatic and aromatic diamines in o-phenylphenol at 200–250°C afforded polyphthalimidines having inherent viscosities of 0.2–1.2 dL/g in almost quantitative yields. Syntheses of aliphatic polyphthalimidines with higher inherent viscosities were also achieved by a two-step procedure involving ring-opening polyaddition and subsequent thermal cyclodehydration. All the polymers were amorphous and readily soluble in N-methyl-2-pyrrolidone (NMP), m-cresol, nitrobenzene, pyridine, and chloroform. Tough and flexible films could be cast from NMP solutions of the polymers. Glass transition temperatures of the polyphthalimidines were in the range of 158–246°C. The thermogravimetry of the aromatic polymers showed 10% weight loss in air and nitrogen at 445–515 and 500–520°C, respectively. The crosslinking reaction of some benzylidenependant polyphthalimidines took place at 300°C through double-bond addition to afford cured polymers with improved thermal stability.     

Synthesis of polyphthalimidines with benzylidene group from aminophthalide monomers

Two aminophthalide monomers, 6-amino-3-benzylidenephthalide (I) and 3-(p-aminobenzylidene)phthalide (II), underwent self-polycondensation in o-phenylphenol at 250°C to yield polyphthalimidines with inherent viscosities up to 0.5 dL/g. These polymers were readily soluble in a variety of solvents such as dimethylformamide, dimethyl sulfoxide, m-cresol, pyridine, and methylene chloride. The temperatures at which a 10% weight loss occurred by thermogravimetry in nitrogen were 460°C for the polymer derived from I and 490°C for the polymer from II. The glass transition temperature of the polymer from I was 332°C, determined by thermomechanical analysis.     

Synthesis and characterization of soluble aromatic polyazomethines from 2,5-bis(4-aminophenyl)-3,4-diphenylthiophene and aromatic dialdehydes

New soluble aromatic polyazomethines with inherent viscosities of 0.4–0.8 dL/g were prepared by the solution polycondensation of 2,5-bis(4-aminophenyl)-3,4-diphenylthiophene, bis(4-aminophenyl) ether, and aromatic dialdehydes in o-chlorophenol at 20°C. The copolyazomethines are generally soluble in chlorinated hydrocarbons, amide-type or phenolic solvents. The thermal stability of the polymers, which showed no weight loss up to 400°C in both air and nitrogen atmospheres.     

Selective permeation of CO2 through poly 2-(N,N-dimethyl)aminoethyl methacrylate membrane prepared by plasma-graft polymerization technique

A membrane having an amine moiety was prepared by plasma-grafting 2-(N,N-dimethyl)aminoethyl methacrylate (DAMA) onto a microporous polyethylene substrate. Permselectivity of the membrane for CO₂ over N₂ was achieved in both dry and water swollen conditions. When the CO₂ partial pressure in the feed gas was 0.047 atm, the selectivity of CO₂ over N₂ reached 130 for the highly swollen water containing membrane. This value was found to agree with that obtained with a mobile carrier membrane (supported liquid membrane) using DAMA as the carrier. The effects of several experimental conditions such as degree of grafting, feed partial pressure and temperature on the membrane performance were studied. It was suggested that the membrane acted as a fixed carrier membrane for CO₂ facilitated transport in under the dry condition and acted as a fixed reaction site membrane in the water swollen condition. The carrier transport mechanism is discussed for dry and aqueous membranes.     

Development of hydrophilic fluorogenic derivatization reagents for thiols: 4-(N-acetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole and 4-(N-trichloroacetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole

Sensitive, reactive, and hydrophilic fluorogenic reagents for thiols with the benzofurazan skeleton, 4-(N-acetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (AcABD-F) and 4-(N-trichloroacetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (TCAcABD-F) have been developed. These reagents reacted with thiols within 10 min at 60 degrees C. AcABD-F and TCAcABD-F themselves do not fluoresce but are strongly fluorescent after the reaction with thiol compounds. The generated derivatives were highly water-soluble, since they dissociated a proton and ionized in the neutral pH region. The derivatives with four biologically important thiol compounds were separated on a reversed-phase HPLC column and detected fluorometrically at 504 nm with excitation at 388 nm. The detection limit attained for homocysteine with AcABD-F was 25 fmol on column (11 nM) (signal-to-noise ratio = 3), and that for glutathione with TCAcABD-F was 45 fmol on column (20 nM).