Multiple proton ionizable calixarene derivatives with different ring sizes and complexation ability as efficient ionophores for complexation and solvent extraction of trivalent indium

The solvent extraction behavior of multiple proton ionizable p-tert-butylcalix[4]arene and [6]arene carboxylic acid derivatives towards indium has been investigated along with an acyclic monomeric analogue from weakly acidic media into chloroform. The extraction mechanism is ion exchange and carboxylic acid groups are adequate ligating sites for extraction. The cyclic structure of calixarene ligands to accommodate the potential guest species and the cooperativity effect of multifunctional groups significantly affect the complexation behavior and calixarene derivatives are found to be excellent extractants over the monomeric analogue. The composition of the extracted complex depends on the solution pH and attempts to determine the composition of the extracted complex for the extraction of indium have been stymied by complications arising from the formation of polynuclear species of indium and bridged polymeric species of calixarene carboxylic acid derivatives. One mole of calix[4]arene derivative extracts 2.5 moles of indium whereas the calix[6]arene derivative tends to extract 4.0 moles of indium. The loaded indium is back extracted with 1 mol dm(-3) hydrochloric acid solution. Though quantitative back extraction of indium was achieved from the fully loaded calix[6]arene derivative, it was only achieved up to 85% in the case of the calix[4]arene derivative.     

Model study of CO inhibition of [NiFe]hydrogenase

We propose a modified mechanism for the inhibition of [NiFe]hydrogenase ([NiFe]H(2)ase) by CO. We present a model study, using a NiRu H(2)ase mimic, that demonstrates that (i) CO completely inhibits the catalytic cycle of the model compound, (ii) CO prefers to coordinate to the Ru(II) center rather than taking an axial position on the Ni(II) center, and (iii) CO is unable to displace a hydrido ligand from the NiRu center. We combine these studies with a reevaluation of previous studies to propose that, under normal circumstances, CO inhibits [NiFe]H(2)ase by complexing to the Fe(II) center.     

Kinetics of phase separation and coarsening in dilute surfactant pentaethylene glycol monododecyl ether solutions

We investigated the phase separation phenomena in dilute surfactant pentaethylene glycol monodedecyl ether (C(12)E(5)) solutions focusing on the growth law of separated domains. The solutions confined between two glass plates were found to exhibit the phase inversion, characteristic of the viscoelastic phase separation; the majority phase (water-rich phase) nucleated as droplets and the minority phase (micelle-rich phase) formed a network temporarily, then they collapsed into an usual sea-island pattern where minority phase formed islands. We found from the real-space microscopic imaging that the dynamic scaling hypothesis did not hold throughout the coarsening process. The power law growth of the domains with the exponent close to 1/3 was observed even though the coarsening was induced mainly by hydrodynamic flow, which was explained by Darcy's law of laminar flow.     

Enhancement of second hyperpolarizabilities in open-shell singlet slipped-stack dimers composed of square planar nickel complexes involving o-semiquinonato type ligands

Using the spin-unrestricted hybrid density functional theory method, we have investigated the intermolecular interaction effects on the longitudinal static second hyperpolarizability (γ) of open-shell singlet slipped-stack dimers composed of singlet diradical square planar nickel complexes involving o-semiquinonato type ligands, Ni(o-C(6)H(4)X(2))(2) (where X = O, NH, S, Se, PH). For comparison, we have also examined the γ values of a closed-shell singlet slipped-stack dimer composed of closed-shell monomers Ni[o-C(6)H(4)S(NH(2))](2). It is found that for interplanar distance ranging between 3.0 and 5.0 ? the slipped-stack dimers with intermediate monomer diradical characters exhibit larger γ values per monomer (γ(dimer)/2) than those with large monomer diradical characters or than the closed-shell dimer. These results extend the domain of validity of the relationship found between γ and the diradical character for individual molecules. It also turns out that the ratio R = (γ(dimer)/2)/γ(monomer) increases upon decreasing the interplanar distance and that this increase is larger for intermediate diradical character than for the other cases. These phenomena have been analyzed by considering the γ density distributions of the dimers, demonstrating a significant field-induced third-order charge transfer between the monomers in the case of intermediate diradical character. The present results indicate that open-shell singlet slipped-stack aggregates composed of monomers with intermediate diradical characters constitute another mean for achieving highly efficient and tunable third-order nonlinear optical materials.     

A novel tungsten trioxide (WO3)/ITO porous nanocomposite for enhanced photo-catalytic water splitting

Hybrid nanocomposite films of ITO-coated, self-assembled porous nanostructures of tungsten trioxide (WO(3)) were fabricated using electrochemical anodization and sputtering. The morphology and chemical nature of the porous nanostructures were studied by Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS), respectively. The photoelectrochemical (PEC) properties of WO(3) porous nanostructures were studied in various alkaline electrolytes and compared with those of titania nanotubes. A new type of alkaline electrolyte containing a mixture of NaOH and KOH was proposed for the first time to the best of our knowledge and shown to improve the photocurrent response of the photoanodes. Here, we show that both the WO(3) nanostructures and titania nanotubes (used for comparison) exhibit superior photocurrent response in the mixture of NaOH and KOH than in other alkaline electrolytes. The WO(3) porous nanostructures suffered from surface corrosion resulting in a huge reduction in the photocurrent density as a function of time in the alkaline electrolytes. However, with a protective coating of ITO (100 nm), the surface corrosion of WO(3) porous nanostructures reduced drastically. A tremendous increase in the photocurrent density of as much as 340% was observed after the ITO was applied to the WO(3) porous nanostructures. The results suggest that the hybrid ITO/WO(3) nanocomposites could be potentially coupled with titania nanotubes in a multi-junction PEC cell to expand the light absorption capability in the solar spectrum for water splitting to generate hydrogen.     

The effect of Cl...π interactions on the conformations of 4‐chloro‐5‐(2‐phenoxyethoxy)phthalonitrile and 4‐chloro‐5‐[2‐(pentafluorophenoxy)ethoxy]phthalonitrile

4‐Chloro‐5‐(2‐phenoxyethoxy)phthalonitrile, C₁₆H₁₁ClN₂O₂, (I), and 4‐chloro‐5‐[2‐(pentafluorophenoxy)ethoxy]phthalonitrile, C₁₆H₆ClF₅N₂O₂, (II), show different types of electrostatic interaction. In (I), the phenoxy and phthalonitrile (benzene‐1,2‐dicarbonitrile) moieties are well separated in an open conformation and intermolecular C—H...π interactions are observed in the crystal packing. On the other hand, in (II), the pentafluorophenoxy moiety interacts closely with the Cl atom to form a folded conformation containing an intramolecular halogen–π interaction.     

High-pressure and high-temperature generation using diamond/sic composite anvils prepared with hot isostatic pressing

Using a hot isostatic pressing (HIP) technique, we synthesized diamond/SiC composites from diamond and Si powders. At an HIP condition of 1450 °C and 100 MPa, a pressure much lower than that of the diamond stability field, diamond powders react with molten Si to form well-sintered diamond/SiC composites. Cubes of the composites with 15 mm edge length were thereby fabricated, and an application to the second stage anvils in a Kawai-type high-pressure apparatus was attempted. A hybrid anvils system using four cubes of the composites and four of the conventional WC was introduced and heating experiments up to 1600 °C became possible. Because the diamond/SiC composites are transparent to X-rays, the present system is applicable not only to diffraction studies but also to radiographic studies that need a larger window for an X-ray image.     

Non-symmetric calamitic liquid crystal dimers containing troponoid and benzenoid units

Five types of non-symmetric calamitic dimers were synthesized to investigate the effect of the core structure and length of the spacer on mesomorphic properties. Two non-symmetric dimers containing a troponoid and benzenoid unit showed smectic A and C phases whereas the corresponding benzenoid dimers showed no mesophase. Non-symmetric dimers with a three-ring system showed smectic A and C phases with higher transition temperatures than the two-ring system. We propose packing models for these non-symmetric dimers by considering the direction of the dipole moments of the ring structures and microsegregation between the polar units and the non-polar chains.     

Electrochemical and thermal properties of hyperbranched polymer electrolytes for batteries

Terminal-acetylated hyperbranched poly(ethylene glycol) derivatives containing diethylene, triethylene, and hexaethylene and 3,5-dioxybenzoate branching units (poly-Ac1a, poly-Ac1b, and poly-Ac1c) were synthesized. Electrochemical and thermal properties of the hyperbranched polymer electrolytes with lithium salts such as LiCF₃SO₃ and LiN(CF₃SO₂)₂, the composite hyperbranched polymer electrolytes with LiN(CF₃SO₂)₂ containing α-LiAlO₂ and γ-LiAlO₂ fillers, and the hyperbranched polymer blended poly(ethylene oxide) electrolytes with LiN(CF₃SO₂)₂ were investigated and discussed. Paper presented at the 8th EuroConference on Ionics, Carvoeire, Algarve, Portugal, Sept. 16–22, 2001.