Metal patterning on silicon surface by site-selective electroless deposition through colloidal crystal templating

Site-selective Cu deposition on a Si substrate was achieved by a combination of colloidal crystal templating, hydrophobic treatment, and electroless plating. Uniformly sized nano/microstructures were produced on the substrate using a monolayer coating of colloidal spheres instead of a conventional resist. The Cu patterns obtained were of two different types: networklike honeycomb and isolated-island patterns with a minimum period of 200 nm. Each ordered pattern with the desired intervals was composed of clusters of Cu nanoparticles with a size range of 50-100 nm. By the present method, it is possible to control the periodicity of metal arrays by changing the diameter of the colloidal spheres used as an initial mask and to adjust the shape of the metal patterns by changing the mask structure for electroless plating.     

Simultaneous long‐chain branching and random scission: I. Monte Carlo simulation

In free‐radical olefin polymerizations, the polymer transfer reactions could lead to chain scission as well as forming long‐chain branches. For the random scission of branched polymers, it is virtually impossible to apply usual differential population balance equations because the number of possible scission points is dependent on the complex molecular architecture. On the other hand, the present problem can be solved on the basis of the probability theory by considering the history of each primary polymer molecule in a straightforward manner. The random sampling technique is used to solve this problem and a Monte Carlo simulation method is proposed. In this simulation method, one can observe the structure of each polymer molecule formed in this complex reaction system, and virtually any structural information can be obtained. In the illustrative calculations, the full molecular weight distribution development, the gel point determination, and examples of two‐ and three‐dimensional polymer structure are shown. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 391–403, 2001     

Markovian approach to nonlinear polymer formation: Free-radical polymerization with chain transfer to polymer

A Markovian model is proposed for nonrandom branching reactions, by using free-radical polymerization that involves chain transfer to polymer as an example. Free-radical polymerizations are kinetically controlled; therefore, each primary polymer molecule experiences different history of branched structure formation. By assuming that the primary chains with the identical birth time conform to the same chain connection probabilities, the nonlinear structural development can be viewed as a system in which the primary chains formed at different birth times are combined into nonlinear polymers in accordance with the first-order Markov chain statistics. An explicit formula for the weight-average chain length is derived in a matrix form. The onset of gelation is simply stated as a point at which the largest eigenvalue of the transition matrix X reaches unity, i.e., det(X − I) = 0. This criterion for the onset of gelation can be considered as an extension of the Flory/Stockmayer theory to a nonequilibrium reaction system. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 357–371, 1998     

Markovian approach to nonlinear polymer formation: Free-radical crosslinking copolymerization

A Markovian model is used to extend the Flory/Stockmayer gelation theory to nonequilibrium reaction systems, by taking free-radical crosslinking copolymerization of vinyl and divinyl monomer as an example. Free-radical polymerizations are kinetically controlled; therefore, each primary polymer molecule experiences a different history of crosslinked structure formation. By assuming that the primary chains with identical birth time conform to the same chain connection probabilities, the nonlinear structural development can be viewed as a system in which the primary chains formed at different birth times are combined into nonlinear polymers in accordance with the first-order Markov chain statistics. According to the present Markovian model, the weight-average chain length, P̄_w is given by a matrix formula, P̄_w = W _p( E — Q )⁻¹ l where W _p is the row vector that concerns the weight contribution of a primary chain, E is a unit matrix, Q is the transition matrix representing the chain connection statistics, and I is a column vector whose elements are all unity. For an equilibrium system, W _p = P̄_wp (weight-average chain length of the primary chains), E = 1, Q = ρP̄_wp (ρ is the crosslinking density), and I = 1; therefore, the present formula reduces to the Flory/Stockmayer equation, P̄_w = P̄_wp/(1 − ρP̄_wp). The criterion for the onset of gelation is simply stated as a point at which the largest eigenvalue of the transition matrix Q reaches unity, i.e., det( E − Q ) = 0. The present Markovian approach elucidates important characteristics of the kinetically controlled network formation, and provides greater insight into nonequilibrium gelling systems.     

Effect of composition of sucrose fatty acid esters on formation of palladium nanoparticles in reverse micelles

Palladium (Pd) nanoparticles were prepared in the reverse micellar system containing sucrose fatty acid esters with various esterification degrees. The TEM showed that Pd nanoparticles were of spherical and relatively uniform. The size of Pd nanoparticles strongly depended upon the composition of sucrose fatty acid esters. The resultant Pd colloid could be preserved for at least 2 months without precipitation.     

Allosteric coextraction of sodium and metal ions with calix[4]arene derivatives 1

Solvent extraction of three alkali metal ions with p-t-octylcalix[6]arene hexacarboxylic acid, p-t-octylcalix[4]arene tetracarboxylic acid, corresponding linear trimeric and monomeric analogs was investigated. Cyclic tetramer selectively extracts sodium ion among alkali ions at extremely low pH, while the corresponding cyclic hexamer, the trimer, and the monomer exhibited only poor extraction ability for all alkali metals examined. The detailed extractive investigation of sodium ions with the cyclic tetramer was carried out. It was found that two sodium ions are simultaneously extracted by a single molecule of calix[4]arene derivative and that the second sodium extraction is facilitated by the uptake of the first sodium. The self-coextraction mechanism of sodium ions proposed in the present paper also strongly supports allosteric coextraction of sodium and other metal ions. In the competitive extraction of four alkali metal ions, potassium ion was slightly extracted as the second ion at low pH region, whereas it was hardly extracted in the individual extraction system. The result also supports the coextraction mechanism and role of the first-extracted sodium ion as an allosteric trigger. The extraction equilibrium constants of the cyclic tetramer and two sodium ions, K _ex1 and K _ex2, were estimated.     

Preparation of calix[4]arene methylene crosslinked resins with 2-pyridyl pendant group and their adsorption behavior towards silver ion

Three different resins namely 1:5 MC-resin, 1:3 MC-resin and 1:1 MC-resin have been synthesized by methylene crosslinking of 2-pyridylcalix[4]arene. Adsorption behavior of these resins towards the metal ions existing in photographic waste was investigated. The resins show absolute efficiency for adsorption of silver ion with no affinity for other coexisting ions. First two resins form 1:1 complex whereas the third one forms 2:1 complex with silver ion. Maximum loading capacity of silver ion on the present resins was found to be 1.15, 1.29 and 0.69 mol kg^?1, respectively. Column chromatographic separation of silver ion in presence of excess of sodium ions was also carried out with 1:5 MC-resin. Selective adsorption of silver ions over excess of sodium ions was achieved.     

Effects of dioctadecyl dimethyl ammonium chloride on the rheological behavior of behenyl trimethyl ammonium chloride/1-hexadecanol/water ternary system

The effects of dioctadecyl dimethyl ammonium chloride (DODAC) on the rheological properties of ternary systems consisting of behenyl trimethyl ammonium chloride (C22TAC), 1-hexadecanol (C16OH), and water are studied to improve the long-term stability and to establish the preparation method of cosmetic products. The basic ternary systems behave as solids at low stresses, due to the formation of lamella liquid crystals called alpha gel. The additions of DODAC to ternary systems cause the rupture of alpha gel structures and transformation to vesicles. The structures of molecular assemblies are confirmed through particle size distribution, differential scanning calorimetry, and freeze fracture electron microscopy. The vesicle structures formed in coexistence of single-chain surfactant and double-chain surfactant are highly stable. Because the quaternary systems are considered to be constructed by the mixtures of alpha gel and vesicles at the appropriate concentrations of DODAC, the rheology can be controlled by the structural balance between them.     

Biocleavable polyrotaxane-plasmid DNA polyplex for enhanced gene delivery

A biocleavable polyrotaxane, having a necklace-like structure consisting of many cationic alpha-cyclodextrins (alpha-CDs) and a disulfide-introduced poly(ethylene glycol) (PEG), was synthesized and examined as a nonviral gene carrier. The polyrotaxane formed a stable polyplex having positively charged surface even at low charge ratio. This is likely to be due to structural factors of the polyrotaxane, such as the mobile motion of alpha-CDs in the necklace-like structure. Rapid endosomal escape was observed 90 min after transfection. The positively charged surface and the good buffering capacity are advantageous to show the proton sponge effect. The pDNA decondensation occurred through disulfide cleavage of the polyrotaxane and subsequent supramolecular dissociation of the noncovalent linkages between alpha-CDs and PEG. Transfection of the DMAE-SS-PRX polyplex is independent of the amount of free polycation. Those properties played a key role for delivery of pDNA clusters to the nucleus. Therefore, the polyplex nature and the supramolecular dissociation of the polyrotaxane contributed to the enhanced gene delivery.     

Simultaneous determination of YM928, a novel noncompetitive AMPA receptor antagonist, and its demethylated metabolite in rat, dog and monkey plasma by high-performance liquid chromatography with ultraviolet detection

A specific HPLC method for the simultaneous determination of YM928, a novel noncompetitive AMPA receptor antagonist, and its demethylated metabolite (YM-58875) in rat, dog and monkey plasma was developed and validated. The method utilized multiple-step liquid-liquid extraction followed by a reversed-phase HPLC with UV detection at 275 nm. No interfering peaks were observed at the retention times of YM928, YM-58875 or internal standard. The validated quantitation range was 5-5000 ng/mL for both YM928 and YM-58875 when 1 mL of the plasma sample was used. The intra- and inter-day precision was less than 5.3 and 2.5% for YM928, and 3.7 and 2.3% for YM-58875, respectively. The intra- and inter-day accuracies were -8.7-5.3% and 0.7-1.9% for YM928, and -10.0-6.1% and 1.3-3.4% for YM-58875, respectively. The mean recoveries in the extraction process were 52.7-62.8%. The utility of this analytical method was demonstrated by the investigation of the pharmacokinetics of the unchanged drug and its metabolite in preclinical studies.