Synthesis and application of head-to-head-type styrene dimers bearing two fluoroalkyl end-groups

Head-to-head-type styrene and substituted styrene dimers bearing two fluoroalkyl end-groups have been efficiently synthesized by a simple reaction of perfluoroalkyl iodide with styrene under radical conditions as a mixture of meso and racemic forms. The meso form obtained from the mixture by recrystallization gave a crystal suitable for X-ray diffraction study and the crystal structure was found to be based on π-stacking of benzene rings and aggregation of fluoroalkyl chains. Dynamic light scattering measurements showed that meso-styrene dimers bearing two fluoroalkyl end-groups can form the nanometer size-controlled self-assemblies through the intermolecular π-stacking of benzene rings and aggregation of end-capped fluoroalkyl groups in methanol.

Development of continuous process enabling nanofibrillation of pulp and melt compounding

Microfibrillated cellulose (MFC), a mechanically fibrillated pulp mostly consisting of nanofibrils, is a very attractive material because of its high elastic modulus and strength. Although much research has been done on composites of MFC and polypropylene (PP), it has been difficult to produce such composites at an industrial level because of the difficulties in using MFC in such composites are not only connected to the polarity (that can be improved with compatibilizers), but also with the challenge to make a homogeneous blend of the components, and also the low temperature stability of cellulose that could cause problems during processing. We developed a new processing method which enables continuous microfibrillation of pulp and its melt compounding with PP. Never-dried kraft pulp and powdered PP were used as raw materials to obtain MFC by kneading via a twin-screw extruder. Scanning electron microscopy showed nano to submicron wide fibers entangled in the powdered PP. MFC did not aggregate during the melt compounding process, during which the water content was evaporated. Maleic anhydride polypropylene (MAPP) was used as a compatibilizer to reinforce interfacial adhesion between the polar hydroxyl groups of MFC and non-polar PP. We investigated the effect of MAPP content on the mechanical properties of the composite, which were drastically improved by MAPP addition. Needle-leaf unbleached kraft pulp (NUKP)-derived MFC composites had better mechanical properties than needle-leaf bleached kraft pulp (NBKP)-derived MFC composites. Injection molded NUKP-derived MFC composites had good mechanical and thermal properties. The tensile modulus of 50 wt% MFC composite was two times, and the tensile strength 1.5 times higher than that of neat PP. The heat distortion temperature of 50 wt% MFC content composite under 1.82 MPa flexural load was increased by 53 °C, from 69 to 122 °C. This newly developed continuous process using powder resin has the potential for application at an industrial level.     

Effects of Photobiomodulation on Root Resorption Induced by Orthodontic Tooth Movement and RANKL/OPG Expression in Rats

The aim of this study was to evaluate the effects of photobiomodulation on the repair of induced root resorption (RR) after orthodontic tooth movement. Twenty male rats were used in this study. Forty right and left upper first molars were evaluated and divided into four groups (n = 10): negative control group (NC), no tooth movement or irradiation; positive control group (PC), induced tooth movement and root resorption; conventional treatment group (CT), force was removed after 7 days; and photobiomodulation group (PBM) after force removal molars were irradiated every 48 h for 7 days using GaAlAs diode laser (810 nm). Energy per point was 1.5 J (100 mW, 15 s, 75 J cm^?2). NC and PC were euthanized on day 7; CT and PBM on day 14. Histomorphometric and immunohistochemsitry analyses showed increase in area of root resorption in all groups (P < 0.05) compared to NC. RR lacunae were larger in CT compared to PC and PBM at the compression side of the distal root. OPG was higher in PBM group (P < 0.05). PBM group showed low expression of RANKL compared to PC and CT on the tension side. PBM can potentially affect RR progression by increasing OPG expression in the compression area and decreasing number of clastic cells in the root surface.     

Facile synthesis of graft copolymers containing rigid poly(dialkyl fumarate) branches by macromonomer method

Graft copolymers show microphase separated structure as seen in block copolymers and have lower intrinsic viscosity than block copolymers because of a branching structure. Therefore, considering molding processability, especially for polymers containing rigid segments, graft copolymers are useful architectures. In this work, graft copolymers containing rigid poly(diisopropyl fumarate) (PDiPF) branches were synthesized by full free‐radical polymerization process. First, synthesis of PDiPF macromonomers by addition‐fragmentation chain transfer (AFCT) was investigated. 2,2‐Dimethyl‐4‐methylene‐pentanedioic acid dimethyl ester was found to be an efficient AFCT agent for diisopropyl fumarate (DiPF) polymerization because of the suppression of undesired primary radical termination, which significantly took place when common AFCT agent, methyl 2‐(bromomethyl)acrylate, was used. Copolymerization of PDiPF macromonomer with ethyl acrylate accomplished the generation of the graft copolymer having flexible poly(ethyl acrylate) backbone and rigid PDiPF branches. The graft copolymer showed a microphase separated structure, high transparency, and characteristic thermal properties to PDiPF and poly(ethyl acrylate). © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2474–2480     

Enzymatic syntheses of unnatural head-to-tail pentacyclic triterpenes by tetraprenyl-β-curcumene cyclase

Little is known of the biosynthesis of sesquarterpenes and the synthesis of unnatural terpenoids by sesquarterpene biosynthetic enzymes has not yet been reported. In this study, the enzymatic cyclization of head-to-tail acyclic triterpene β-hexaprene—a natural product isolated from Bacillus clausii—using tetraprenyl-β-curcumene cyclase (TC) from Bacillus subtilis resulted in the formation of two unnatural pentacyclic triterpenes. It was revealed that B. subtilis TC, which forms tetracyclic terpenoid scaffold from tetraprenyl-β-curcumene in vivo, could be used to construct the 6/6/6/6/6-fused pentacyclic scaffold in vitro, suggesting that the active site cavity of TC has sufficient space to accommodate this unnatural pentacyclic scaffold. This is the first report demonstrating the utility of a sesquarterpene cyclase toward the synthesis of unnatural terpenoids.     

Coloring–decoloring behavior of fluoroalkyl end‐capped 2‐acrylamido‐2‐methylpropanesulfonic acid oligomer/acetone composite in methanol

A reddish‐brown fluoroalkyl end‐capped 2‐acrylamido‐2‐methylpropanesulfonic acid (AMPS) oligomer/acetone composite was prepared by heating the white oligomer powder with acetone at 80 °C for 3 h. The color was not observed in the corresponding non‐fluorinated AMPS oligomer/acetone composite, which was prepared under similar conditions. The coloring was probably caused by the formation of acetone polyaldol condensation products in the fluorinated oligomeric gel network cores. The colored R_F‐(AMPS)_n‐R_F/acetone composite powders were stable and did not exhibit any color change after 2 years in natural light at room temperature. The colored composite powders dissolved in methanol to give a reddish‐brown solution at room temperature. However, the retro‐polyaldol condensation decolored the solution after 1 day at room temperature. This is the first example of the retro‐aldol polycondensation of acetone under mild conditions. The decoloration increased by between 38‐ and 70‐fold under UV irradiation, compared with that in dark conditions. The coloring–decoloring behavior was consistent and repeatable; therefore our fluorinated oligomer/acetone composites are promising candidates for new fluorinated coloring materials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2555–2564     

Heterodinuclear Lanthanoid‐Containing Polyoxometalates: Stepwise Synthesis and Single‐Molecule Magnet Behavior

Polyoxometalates (POMs) with heterodinuclear lanthanoid cores, TBA₈H₄[{Ln(μ₂‐OH)₂Ln′}(γ‐SiW₁₀O₃₆)₂] ( LnLn′ ; Ln=Gd, Dy; Ln′=Eu, Yb, Lu; TBA=tetra‐n‐butylammonium), were successfully synthesized through the stepwise incorporation of two types of lanthanoid cations into the vacant sites of lacunary [γ‐SiW₁₀O₃₆]^8? units without the use of templating cations. The incorporation of a Ln³⁺ ion into the vacant site between two [γ‐SiW₁₀O₃₆]^8? units afforded mononuclear Ln³⁺‐containing sandwich‐type POMs with vacant sites ( Ln1 ; TBA₈H₅[{Ln(H₂O)₄}(γ‐SiW₁₀O₃₆)₂]; Ln=Dy, Gd, La). The vacant sites in Ln1 were surrounded by coordinating W? O and Ln? O oxygen atoms. On the addition of one equivalent of [Ln′(acac)₃] to solutions of Dy1 or Gd1 in 1,2‐dichloroethane (DCE), heterodinuclear lanthanoid cores with bis(μ₂‐OH) bridging ligands, [Dy(μ₂‐OH)₂Ln′]⁴⁺, were selectively synthesized ( LnLn′ ; Ln=Dy, Gd; Ln′=Eu, Yb, Lu). On the other hand, La1 , which contained the largest lanthanoid cation, could not accommodate a second Ln′³⁺ ion. DyLn′ showed single‐molecule magnet behavior and their energy barriers for magnetization reversal (ΔE/k_B) could be manipulated by adjusting the coordination geometry and anisotropy of the Dy³⁺ ion by tuning the adjacent Ln′³⁺ ion in the heterodinuclear [Dy(μ₂‐OH)₂Ln′]⁴⁺ cores. The energy barriers increased in the order: DyLu (ΔE/k_B=48 K)< DyYb (53 K)< DyDy (66 K)< DyEu (73 K), with an increase in the ionic radii of Ln′³⁺; DyEu showed the highest energy barrier.     

Smectic A and smectic C materials: partially deuteriated chiral liquid crystals (S)-(-)-2-methylbuty 4-(4-(d13)-hexyloxyphenyl)benzoate and (S)-(-)-2-methylbutyl 4-(4-(d17)-octyloxyphenyl)benzoate

In order to study the difference in microscopic orientation of ferro- and antiferroelectric liquid crystalline molecules, we synthesized the partially deuteriated chiral compounds, (S)-(^-)-2-methylbutyl 4-(4-(d₁₃)-hexyloxy- and (S)-(^-)-2-methylbutyl 4-(4-(d₁₇)-octyloxy-phenyl)benzoates. Fundamental physical properties such as phase transition temperatures, spontaneous polarization and tilt angle were determined. Polarized FTIR measurements were also made to provide information on molecular structure and orientation.     

Effect of an electric field on defects in a nematic liquid crystal with variable surface anchoring

We report experimental studies on defects in a nematic liquid crystal with negative dielectric anisotropy mounted in a cell with perfluoropolymer-coated surfaces. The sample exhibits a discontinuous anchoring transition from planar to homeotropic on cooling at zero or a small electric field, and above a cross-over voltage a continuous ‘inverse Freedericksz transition’, at which the director starts tilting in opposite directions at the two surfaces. Defects of strength ±1/2 are either annihilated or expelled when the director tilts. On the other hand, disclination lines of ±1 which end in partial point defects (boojums) at the surfaces in the planar alignment regime acquire point defects of strength ±1 at the midplane of the cell when the director tilts. At a low enough temperature, the homeotropic anchoring becomes strong, and an electric field above the Freedericksz threshold generates the usual umbilic defects, which follow the dynamic scaling laws found in earlier studies.     

Syntheses of Methyl 2,3-di-O-Glycyl-α-D-glucopyranoside and 4,6-di-O-Glycyl-2,3-di-O-methyl-α-D-glucopyranoside,and Removal of Aminoacyl Groups from Sugar Moieties

Abstract

To confirm the potential usefulness of amino acid residues as protecting groups for sugar hydroxyls, methyl 2,3-di-O-glycyl-α-D-glucopyranoside (5) and methyl 4,6-di-O-glycyl-2,3-di-O-methyl-α-D-gluco-pyranoside (7) were synthesized as reference compounds. Conditions were then established for the removal of these aminoacyl groups from the sugar molecules. The reference compounds were easily prepared by condensation of methyl α-D-glucopyranoside derivatives with N-protected glycine in the presence of dicyclohexyl-carbodiimide (DCC). The aminoacyl groups were removed by alkaline treatment, as were conventional acyl groups and also with ease by enzymatic hydrolysis using Pronase E. Conventional ester and ether protecting groups are not removed by such enzymatic treatment. Removal of aminoacyl group from sugar moieties on a practical scale is also described.