Influences of fatty acid moiety and esterification of polyglycerol fatty acid esters on the crystallization of palm mid fraction in oil-in-water emulsion

We examined the crystallization of palm mid fraction (PMF) in oil-in-water (O/W) emulsion, after adding polyglycerol fatty acid esters (PGFEs). We employed ultrasonic velocity measurements and DSC techniques, with special emphases on the influences of fatty acid moiety and esterification of PGFE. Twelve types of PGFEs were examined as additives. PGFEs have a large hydrophilic moiety composed of 10 glycerol molecules to which palmitic, stearic and behenic acids were esterified as the fatty acid moiety with different degrees of esterification. Crystallization temperature (T(c)) of PMF remarkably increased with increasing concentrations of the PGFEs as the chain length of the fatty acid moiety increased, and the PGFE became more hydrophobic in accordance with increasing degree of esterification. We observed that the heterogeneous nucleation of PMF in the O/W emulsion was activated at the oil-water interface, where the template effect of very hydrophobic long saturated fatty acid chains of the PGFE might play the main role of heterogeneous nucleation.     

Electrochemical synthesis of a polypyrrole thin film with supercritical carbon dioxide as a solvent

A conductive polypyrrole (PPy) film was successfully synthesized in a homogeneous supercritical carbon dioxide (scCO2)/acetonitrile (AN) system. The occurrence of a homogeneous supercritical state was confirmed by observations of the phase behavior of the system through a high-pressure cell with a viewing window. The concentration of a supporting electrolyte, tetrabutylammonium hexafluorophosphate (TBAPF6), significantly changed the phase behavior of the scCO2/AN system. The polymerization rate of the film in that system decreased with further addition of CO2. This result suggested that the low viscosity of scCO2 did not play an important role in improving the growth rate of the PPy film. The low polymerization rate might have been due to the electron-transfer resistance arising from the low dielectric constant of scCO2/AN mixture. The roughness of the film prepared in the homogeneous scCO2/AN system was 1/10 that synthesized in AN itself as a solvent. The slow growth of film and the high diffusion rate of the monomer seemed to account for the smooth flat film formation.     

Copper-catalyzed addition reaction of γ,γ-dialkoxyallylic zirconium species with imines

In the presence of CuCN, reaction of γ,γ-dialkoxyallylic zirconium species 1 with imines proceeded at the γ-position of 1 to give gem-dialkoxyhomoallylic amines 3 in high yield. In this reaction, γ,γ-dialkoxyallylic zirconium species 1 acts as an α,β-unsaturated acyl anion equivalent.     

Ionic-conductivity switching of vinyl malachite green leuconitrile copolymers based on photoinduced carrier generation

Copolymers of bis[4-(N,N-dimethylamino)phenyl]-4-vinylphenylmethanenitrile (vinyl Malachite Green leuconitrile) with methyl methacrylate or ω-methoxyoligo(oxyethylene) methacrylate have been synthesized, aiming at designing one-component-type organic polymers for photoswitchable ion-conducting films. The triphenylmethanenitrile copolymers with ω-methoxyoligo(oxyethylene) methacrylate were found to undergo ionic-conductivity switching by turning on and off UV light at ambient temperature, owing to their low glass transition temperature. © 1993 John Wiley & Sons, Inc.     

Carbon dioxide fixation by microalgae photosynthesis using actual flue gas discharged from a boiler

To mitigate CO₂ discharged from thermal power plants, studies on CO₂ fixation by the photosynthesis of microalgae using actual exhaust gas have been carried out. The results are as follows.

Application of europium(III) extraction with organophosphinic acid to liquid membrane transport

The extraction behavior of Eu(III) has been studied using di(2,4,4-trimethylpentyl)phosphinic acid (DTMPPA, HA) in kerosene. Europium was extracted as Eu(HA₂)₃ with the extraction constant of 2.0·10^–3. This extraction system was applied to the transport of Eu(III) across a DTMPPA liquid membrane supported on porous polytetrafluoroethylene. Europium was quantitatively moved through the liquid membrane containing 0.1M (HA)₂ as a mobile carrier from the feed solution of pH above 3 into the product solution of 0.1M HNO₃, yielding a concentration factor of ten. The transport rate increased with increasing pH and DTMPPA concentration.     

Mechanism of antioxidant action of pueraria glycoside (PG)-1 (an isoflavonoid) and mangiferin (a xanthonoid).

The antioxidant activities of pueraria glycoside (PG)-1 (isoflavonoid) and mangiferin (xanthonoid) were studied and compared with PG-3 and daidzein (isoflavonoids) and with wogonin (flavonoid). PG-1 and mangiferin rapidly scavenged 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical, and inhibited lipid peroxidation which was initiated enzymatically by reduced nicotinamide adenine dinucleotide phosphate (NADPH) or non-enzymatically by ascorbic acid or Fenton's reagent (H2O2 + Fe2+) in rat liver microsomes. Wogonin inhibited the enzymatically induced lipid peroxidation but had no scavenging effect on DPPH radical or on the non-enzymatic peroxidation. PG-3 and daidzein did not show any of these effects. Formation of Fe2+ by NADPH-dependent cytochrome P-450 reductase was inhibited by wogonin, but not by PG-1 or mangiferin. PG-1 and mangiferin had no effect on terminating radical chain reaction during the lipid peroxidation in the enzymatic system of microsomes or in the linoleic acid hydroperoxide-induced peroxidation system. These results suggest that PG-1 and mangiferin have an antioxidant activity, probably due to their ability to scavenge free radicals involved in initiation of lipid peroxidation. In contrast, wogonin may affect NADPH-dependent cytochrome P-450 reductase action, since it inhibited only the enzymatically induced lipid peroxidation.     

Pre-fibrillation of pulps to manufacture cellulose nanofiber-reinforced high-density polyethylene using the dry pulp direct kneading method

The dry pulp direct kneading method is an industrially viable, low-energy process for manufacturing cellulose nanofiber (CNF)-reinforced polymer composites, where the chemically modified pulps are nanofibrillated and uniformly dispersed in the polymer matrix during melt compounding. In the present study, cellulose fibers of various sizes ranging from surface-fibrillated pulps (20 μm in width) to fine CNFs (20 nm in width) were prepared from softwood bleached kraft pulps using a refiner and a high-pressure homogenizer. These cellulose fibers were modified with alkenyl succinic anhydride and dried. The dried fibers were used as a feed material for melt compounding in the dry pulp direct kneading method to fabricate CNF-reinforced high-density polyethylene (HDPE). When surface-fibrillated pulps were employed as a feed material, the pulps were nanofibrillated and dispersed uniformly in the HDPE matrix during melt compounding. The resulting composites had much better properties—i.e., much higher tensile modulus and strength values, and much lower coefficient of thermal expansion values—than the composites produced using pulps without pre-fibrillation. However, when CNFs were used as a feed material, they were shortened and agglomerated during melt compounding, and the properties of the composites consequently deteriorated. The study concludes that surface-fibrillated pulp, which can be produced cost-effectively using a refiner on an industrial scale, is more suitable as a feed material than CNFs for melt compounding in the dry pulp direct kneading method. This finding enables the elimination of a preliminary step in the preparation of CNFs from pulps, which is a time-consuming and energy-intensive process.

Graphical abstract

     

Studies on pyrazines. 4.. The synthesis of 2-hydroxy-6-phenylpyrazine and its derivatives

This report describes a new method for the preparation of 2-hydroxy-6-phenylpyrazine ( 1 ). Amino acetal 5 was converted to glycyl amino acetal 7 by two steps in excellent yield. Cycliza-tion of 7 to 1 was accomplished in 33% yield by refluxing in acetic acid followed by oxidation with manganese dioxide. Compound 1 was also prepared by hydrolysis of amino- and methoxy-pyrazines 3 and 15 , derived from 2-hydroxy-5-phenylpyrazine ( 2 ) and the 2-amino homologue 4 , respectively, and by decarboxylation of 2-hydroxy-5-phenylpyrazinecarboxylic acid ( 19 ).     

Blue myoglobin reconstituted with an iron porphycene shows extremely high oxygen affinity

Myoglobin will be a good scaffold for engineering a function into proteins. To modulate the physiological function of myoglobin, almost all approaches have been demonstrated by site-directed mutagenesis, however, there are few studies which show a significant improvement in the function. In contrast, we focused on the replacement of heme in the protein with an artificial prosthetic group. Recently, we prepared a novel myoglobin reconstituted with an iron porphycene as a structural isomer of mesoheme. The bluish colored reconstituted myoglobin is relatively stable and the deoxymyoglobin reversibly binds ligands. Interestingly, the O2 affinity of the reconstituted myoglobin, 1.1 x 109 M-1, is a significant 1,400-fold higher than that of the native myoglobin. Furthermore, the unfavorable autoxidation kinetics show 7-fold decrease in rate for the reconstituted myoglobin relative to the native myoglobin, indicating the stable oxy-form against autoxidation. The net results come from the slow dissociation of the O2 ligand in the reconstituted myoglobin, koff = 0.11 s-1, because of the formation of strong hydrogen bond between His64 and negatively charged dioxygen. The present study indicates that the replacement of native heme with an artificially created prosthetic group will give us a unique function into a hemoprotein.