Optical sensor for carbon dioxide combining colorimetric change of a pH indicator and a reference luminescent dye

A new optical CO₂ sensor based on the luminescence intensity change of the europium(III) complex tris(thenoyltrifluoroacetonato) europium(III) dihydrate ([Eu(tta)₃]) caused by the absorption change of various pH indicators—thymol blue, phenol red, or cresol red—with CO₂ was developed and its CO₂ sensing properties were investigated. For all the CO₂ sensors using pH indicators the observed luminescence intensity from [Eu(tta)₃] at 613 nm increased with increasing CO₂ concentration. The linear calibration method based on the plot of (I₁₀₀–I₀)/(I–I₀) versus the inverse of CO₂ concentration was suggested, where I₀ and I₁₀₀ were luminescence intensities at 613 nm of the CO₂ sensor film in 100% nitrogen and 100% gaseous CO₂. In all cases the plots showed good linearity and the correlation factors of the plots, r², were 0.991 for thymol blue, 0.990 for phenol red, and 0.998 for cresol red. The slopes of the plots (A/B) for thymol blue, phenol red, and cresol red were 2.2, 5.2, and 9.0%, respectively. The response times of the CO₂ sensor film were 4.0 s for thymol blue, 4.4 s for phenol red, and 8.8 s for cresol red for switching from nitrogen to CO₂, and the recovery times of films were 36 s for thymol blue, 39.2 s for phenol red, and 56.6 s for cresol red for switching from CO₂ to nitrogen. The signal changes were fully reversible and hysteresis was not observed during the measurements. The highly sensitive CO₂ sensor was developed using thymol blue as an indicator for the CO₂-sensing probe.     

A comparison of supercritical carbon dioxide and organic solvents for the intercalation of 4-phenylazoaniline into a pillared clay mineral

The intercalation of 4-phenylazoaniline (PAA) in supercritical carbon dioxide (SC-CO(2)) into montmorillonite (TMA-Mnt) pillared with tetramethylammonium ions at 313 K and 15 MPa was investigated. The adsorption rate and equilibrium PAA uptake were compared with those in n-hexane, CCl(4) and benzene solutions at 313 K. The XRD and N(2) adsorption/desorption analyses showed that TMA-Mnt after adsorption of PAA in SC-CO(2) had the same pore structure as after adsorption of PAA in normal solvents. SC-CO(2) was found to be a good medium for PAA adsorption owing to its having a relatively high adsorption rate and the highest adsorptivity at the same PAA concentration. The properties of PAA adsorption on TMA-Mnt could be well elucidated by the difference in solubility parameters between liquid and solid phases.     

Remarkable reactivity enhancement with Sb?N inter-coordination of ethynyl-1,5-azastibocines in Pd-catalyzed cross-coupling reactions with organic halides

The reaction of 12-arylethynyl-6-methyl-5,6,7,12-tetrahydrodibenzo[c,f][1,5]-azastibocines with organic halides such as acyl halides and aryl halides in the presence of PdCl₂(PPh₃)₂ as a catalyst led to the formation of cross-coupling products, alkynyl ketones and diaryl acetylenes, in good yields. The reactivity of the ethynyl group on the 1,5-azastibocines was far superior to that on diphenyl(phenylethynyl)stibane, which brought about marked improvement in the reaction conditions (lower temperature and shorter reaction time) and in the yields of the cross-coupling products. Single-crystal X-ray analysis of the ethynyl-1,5-azastibocine showed the presence of intramolecular Sb?N interaction which should be responsible for the remarkable reactivity enhancement of the 1,5-azastibocines for this type of reaction.     

A new synthetic pathway of segmented tri-block copolyether

A new synthetic pathway of A–B–A tri-block copolyether which is composed of a hydrophilic poly(oxyethylene) unit as an A part and a hydrophobic poly(oxy-2-methyl-trimethylene) unit as a B part is proposed. Telechelic α-tosyl-ω-tosyloxypoly(oxy-2-methyl-trimethylene) derived from tosylation of poly(oxy-2-methyl-trimethylene glycol) (PMTG) was allowed to react with poly(ethylene glycol) (PEG) in the presence of sodium hydroxide. T_g of the resulting A–B–A tri-block copolyether (PEMG) (M?_n = 1600) was ?72°C and its specific gravity [D₄¹⁵] was 1.055.     

The counterion releasing effect and the partition coefficient of branched alkanols in ionic micellar solution

In the micellar solution of SDS, the partition coefficient (K_x) of following branched alkanols at infinite dilution was determined by applying a differential conductivity method: the alkanols used were i-C_mH_2m+1OH (m=4-9, i=1-5) in which the position of OH group (i) shifts from an end to the center of a hydrocarbon chain. The method provides two significant quantities, d!/dX_am and dC_sf/dC_af in addition to K_x. The following results have been obtained. (1) The dependence of K_x on i indicates that the hydrophobicity of alkanol is weakened with increasing i, whereas the increase in m strengthens the hydrophobicity. (2) The degree of counterion disossiation of micelles (!) is accelerated by the solubilized alkanols in micelles (mole fraction: X_am) and the acceleration rate, d!/dX_am (=0.17), depends on neither m nor i. (3) In the bulk water, the monomerically dissolved alkanols (concentration: C_af) depresses the concentration of free monomer surfactant (C_sf), and the depressing rate, dC_sf/dC_af, in micellar solution is identical with the corresponding quantity, ((CMC/(C_a)_o at CMC.     

Effects of added metal ions on the interaction between polyvinylpyrrolidone and azo dyes carrying hydroxyl groups

The extent of binding of chrome violet, which is a monoazo dye and involves two hydroxyl groups in o and o′ positions to azo group, by polyvinylpyrrolidone is markedly enhanced in the presence of Co²⁺ ion. The amount of binding in the presence of 1 × 10^?4 mol/L of Co²⁺ ion increases by a factor of about 10 compared to that in the absence of the metal ion. Ni²⁺ and Zn²⁺ ions do not perceptively influence the binding affinity of the dye. Cu²⁺ ion, in contrast, suppresses the binding. To investigate further the action of added metal ions, a cobalt–complex dye was prepared and its binding property for the polymer was compared to that of chrome violet in the presence of metal ions. Some possible mechanisms for the enhancement of chrome violet binding by the addition of Co²⁺ ion are described.     

Efficient esterification of carboxylic acids and phosphonic acids with trialkyl orthoacetate in ionic liquid

An operationally simple, inexpensive, efficient, and environmentally friendly esterification of various carboxylic acids, phosphonic acids, and phosphinic acids with triethyl orthoacetate or trimethyl orthoacetate under neutral conditions in a typical room temperature ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate, was successfully carried out to provide the corresponding ethyl esters or methyl esters in high yields.     

Halogen derivatives of m-phenylene(carbeno)nitrene: a switch in ground-state multiplicity

m-Phenylene-coupled carbenonitrenes [(3-nitrenophenyl)methylene (2-H), (3-nitrenophenyl)fluoromethylene (2-F), (3-nitrenophenyl)chloromethylene (2-Cl), (3-nitrenophenyl)bromomethylene (2-Br)] have been investigated computationally (with B3LYP, MCSCF, CASPT2, ROMP2, and QCISD(T) methods) and experimentally (with IR, UV, and ESR spectroscopy). For each species, five electronic states were considered. At the highest level of theory explored, the parent compound (2-H) has a quintet ground state, but its halogen derivatives (2-X, X = F, Cl, and Br) have triplet ground states. A linear relationship between the Q[bond]T energy gap of 2-X and the T-S gap of the corresponding phenylcarbenes 8-X is found, which can be helpful in rationalizing and predicting ground-state multiplicities in m-phenylene-linked carbenonitrenes and similar species. Precursors for the photochemical generation of 2-X (X = H, F, Cl, and Br) were synthesized and photolyzed in matrixes (Ar, triacetin) at low temperatures. IR (Ar, 13 K) and ESR (triacetin, 77 K) data are compatible with the generation of triplet halocarbenonitrenes 2-X, (X = F, Cl, and Br). All four compounds upon further irradiation undergo isomerization to substituted cyclopropenes 5-X (X = H, F, Cl, and Br), as suggested by their IR spectra.     

A multipolymer system for organocatalytic alcohol oxidation

A system involving two polymer-supported reagents for the selective and organocatalytic oxidation of alcohols to aldehydes or ketones has been developed in which both polymeric reagents can be recovered and reused.     

Detection of environmental chemicals by SPR assay using branched cyclodextrin as sensor ligand

We obtained the association constants Ka of estrogen (E2) and environmental chemicals by the surface plasmon resonance (SPR) assay using the immobilized mono-6-O-α-maltosyl-β-CD (G₂βCD) compared with the immobilized β-CD and the immobilized estrogen receptor (ER). The association behavior of G₂βCD was shown as a ER model compound. The calibration curve was determined by the initial rate of association depending on the various concentrations, and the minimum detectable concentrations in the order of parts per billion were calculated. The SPR assay has advantages that the pre-treatment of the sample is not necessary and the immobilized ligand is stable and useful for the repeated measurement.