Electrochemical generation of silver acetylides from terminal alkynes with a Ag anode and integration into sequential Pd-catalysed coupling with arylboronic acids

An electro-oxidative method for generating silver acetylides from acetylenes with a Ag anode was developed. The reaction could be integrated into a Pd-catalysed electrochemical Sonogashira-type reaction. In the presence of the catalytic amount of Pd(OAc)(2) and 4-BzO-TEMPO, electro-generated silver acetylides reacted immediately with arylboronic acids to afford the corresponding coupling adducts in high yields.     

Recent trends in solid phase spectrometry: 2003-2009. A Review

Around 100 papers published from 2003 to the present are reviewed concerning analytical methods for the direct light measurement of a solid phase in which a target colored or fluorescent analyte is concentrated. Recent attention has been paid to the development of flow injection-solid phase spectrometry as a simple and inexpensive tool for routine analysis of organic compounds or pharmaceuticals. Due to some improvements in flow injection analysis, such as sequential injection and lab-on-a-valve, it is possible not only to reduce the reagent consumption but also to devise fully automatic and miniaturized systems with minimal maintenance needs. This may have the potential of becoming one of the green analytical methods. Flow injection-solid phase spectrometry is expected to be applied to the speciation of trace chemical components (e.g., specific determination of trace metal ions in different existent oxidation states) in real samples in the environment.     

Short polyglutamine peptide forms a high-affinity binding site for thioflavin-T at the N-terminus

Thioflavin-T is one of the most important amyloid specific dyes and has been used for more than 50 years; however, the molecular mechanism of staining is still not understood. Chemically synthesized short polyglutamine peptides (Q(n), n = 5-10) were subjected to the thioflavin-T (ThT) staining assay. It was found that the minimum Q(n) peptide that stained positive to ThT was Q(6). Two types of ThT-binding sites, a high-affinity site (k(d1) = 0.1-0.17 μM) and a low-affinity site (k(d2) = 5.7-7.4 μM), were observed in short polyQs (n = 6-9). (13)C{(2)H}REDOR NMR experiments were carried out to extract the local structure of ThT binding sites in Q(8) peptide aggregates by observing the intermolecular dipolar coupling between [3-Me-d(3)]ThT and natural abundance Q(8) or residue-specific [1,2-(13)C(2)] labeled Q(8)s. (13)C{(2)H}REDOR difference spectra of the [3-Me-d(3)]ThT/natural abundance Q(8) (1/9) complex indicated that all of the five carbons of the glutamine residue participated in the formation of ThT-binding sites. (13)C{(2)H}DQF-REDOR experiments of [3-Me-d(3)]ThT/residue-specific [1,2-(13)C(2)] labeled Q(8) (1/50) complexes demonstrated that the N-terminal glutamine residue had direct contact with the ThT molecule at the high-affinity ThT-binding sites.     

Structure elucidation of a novel analog of sildenafil detected as an adulterant in a dietary supplement using LC-UV and LC/MS

A sildenafil-related compound was detected in a dietary supplement marketed as an aphrodisiac. The compound was detected during analysis of the dietary supplement using LC-UV and LC/electrospray ionization-MS. The structure of the compound was established using high resolution MS, NMR spectrometry, and X-ray crystal structure analysis. The compound was identified as 5-(5-((3,5-dimethylpiperazin-1-yl)sulfonyl)-2-ethoxyphenyl)-l-methyl-7-((1-methyl-4-nitro-1H-imidazol-5-yl)thio)-3-propyl-1H-pyrazolo[4,3-d] pyrimidine. Based on this structure, the compound was named nitroprodenafil. The dietary supplement was found to contain 90 mg nitroprodenafil/capsule. This article describes the structural characterization of a new sildenafil-related compound. The compound was detected during analysis of a dietary supplement using LC-UV and LC/electrospray ionization (ESI)-MS. The structure was established using high resolution MS (HRMS), NMR spectrometry, and X-ray crystal structure analysis. The structures of methisosildenafil, thiomethisosildenafil, and this new analog, named nitroprodenafil (21), are shown in Figure 1. In the Demizu et al. report, the compound is named mutaprodenafil instead ofnitroprodenafil. Considering the naming right, the authors of this paper think the use of mutaprodenafil is appropriate as the compound name, although nitroprodenafil is used.     

A new method for accurately determining the modal equivalent stiffness ratio of bonded piezoelectric structures

This paper describes new methods for measuring the modal equivalent stiffness ratios and modal electromechanical coupling coefficients of piezoelectric elements attached to a host structure such as a beam. Modal equivalent stiffness ratios and modal electromechanical coupling coefficients are essential for estimating the performance and determining an optimum design of active vibration control and passive vibration suppression systems that use piezoelectric elements. Accurate determination of these modal parameters is also useful for other systems including piezoelectric sensors and energy generators. This paper not only describes the measurement methods but also presents the theoretical formulations derived by taking into account the effect of adhesive bonds. The formulations in this paper demonstrate the necessity of experimental measurements and the accuracy enhancements that the theoretical estimations can provide. Conventional methods for obtaining the modal equivalent stiffness ratios are sensitive to measurement errors, which result in the loss of accuracy, rendering these methods unreliable for many practical applications. The proposed methods use an inductor instead of an open circuit to address the abovementioned issue and, thereby, provide significant improvement in the accuracy. Because the loss factors of the experimental apparatus tend to compromise the accuracy of the proposed methods, a method using a negative resistor is proposed, theoretically analyzed, and confirmed to eliminate some of the errors introduced by loss factors. The advantages of the proposed methods and the effectiveness of theoretical analysis, considering the effect of adhesive bonds, are verified experimentally.     

Surface potential switching by metal ion complexation/decomplexation using bipyridinethiolate monolayers on gold

Surface potential switching on gold(111) surfaces is induced by complexation/decomplexation reactions of a bipyridine (BP) derivative and palladium(II) chloride, as observed by Kelvin probe force microscopy (KFM). On the basis of the theoretical predictions, a 4-(5-phenylethynyl-2,2'-bipyridine-5'-yl-ethynyl)benzenethiol (PhBP) derivative was synthesized and used as an active monolayer to catch transition metal ions. By using the microcontact printing (CP) technique, micron-size patterned PhBP monolayers, which act as effective hosts to coordinate palladium(II) chloride, were prepared on gold(111) surfaces. The KFM signal decreases by complexation of the Pd(II) chloride in PhBP monolayers and is recovered by removal of Pd ions using an ethylenediamine solution, as confirmed by X-ray photoelectron spectroscopy. This process is reversible, indicating that the surface potential switching is realized by complexation/decomplexation of Pd(II). A CP PhBP monolayer, when it detects the target palladium ion, shows sensitivity for the picomolar level detection judged from surface potential changes in KFM measurements. The dipole moment estimated by the surface potentials is much smaller than the calculated value, indicating that mechanisms for the reduction of the surface dipole moment exist in real monolayers prepared by the CP method.     

AFM observation of immobilized self-oscillating polymer

Various types of nanocomponents have been developed to construct a nanodevice or nanomachine. Here, we add a new nanocomponent that has the function of self-oscillation. A thermoresponsive polymer carrying a Ru complex, a catalyst of the Belousov-Zhabotinsky reaction, was synthesized and immobilized on a glass plate. Periodic turbidity changes in the aqueous solution of the polymer were observed, and nanoscale self-oscillation of the immobilized polymer was observed by a scanning probe microscope.     

Photoexcitation of K-shell and L-shell hollow beryllium

We have observed K-shell and L-shell hollow beryllium atoms (2s(2)2p3s and 1s3s(2)3p) created by photoexcitation using synchrotron radiation. Resonance shapes were fitted to the Fano profile and the parameters were deduced. A Dirac-Fock calculation was performed to identify the configuration of the peaks and to predict other hollow atomic peaks. The results of the calculation were in good agreement with the experimental data. The comparison of the transition strength has revealed that the three-electron photoexcitation to the 1s3s(2)3p configuration is stronger than the two-electron photoexcitation to the 2s(2)2p3s configuration. This is attributed to the large overlap between the 2s orbital of the ground state (1s(2)2s(2)) with the orbital of the L-shell hollow state (1s3s(2)3p).     

Transient electrostatic fields and related energetic proton generation with a plasma fiber

We observe a hollow structure and a fine ring in the proton images from a petawatt scale laser interaction with a "cone-fiber" target. The protons related to the hollow structure are accelerated from the cone-tip surface and deflected later by a radial electric field surrounding the fiber. Those associated with the fine ring are accelerated from the fiber surface by this radial electric field. This field is found to decay exponentially within 3 ps from about 5 x 10(12) V/m. Two-dimensional particle-in-cell simulations produce similar proton angular distributions.