Survey meter combining CVD diamond and silicon detectors for wide range of dose rates and high accumulated doses

We have developed a prototype of a survey meter combining a CVD diamond detector and silicon detectors to appropriately take temporal measurements of γ-ray radiations over a wide range of the dose rates and to measure high accumulated doses of γ-ray radiations. In order to carry out this, at first, we have studied the radiation hardness of diamond detectors suitably fabricated with high-quality single-crystalline CVD diamond films to confirm that such CVD diamond detectors have greatly superior radiation hardness, compared with commercially available silicon detectors. It is evidenced that the performance of the CVD diamond detector did not significantly change even after heavy γ-ray irradiation of 0.7 MGy while the silicon detectors have a remarkable increase in the dark current, a detection peak shift to the low energy side, and a decrease in detection counts for 5.486-MeV α particles. Due to a size limitation of the CVD diamond detector, such a CVD diamond detector was combined with six commercially available silicon detectors to fabricate a survey meter which can appropriately work under severe irradiation conditions, or, at accumulated doses larger than at least 0.5 MGy and which can cover a wide range of the dose rates from 1 μGy/h to at least 1 kGy/h. The prototype survey meter had a practically useful linearity in this dose rate range. Thus, we have confirmed that such a diamond-Si combined survey meter can be put into practical use.     

Total synthesis of (±)-lysidicin A

Lysidicin A, which has been isolated from Lisidicie rhodostegia possesses complicated structure. A total synthesis of lysidicin A has been achieved and is described herein. The key reaction is single and cascade Claisen rearrangements.     

One‐Pot Synthesis of 4‐Substituted 3,4‐Dihydro‐3‐methoxyisocoumarins via Carboxylation of α‐Substituted 2‐Lithio‐β‐methoxystyrenes with Carbon Dioxide

A new type of isocoumarins (=1H‐isochromen‐1‐ones=1H‐2‐benzopyran‐1‐ones), 4‐substituted 3,4‐dihydro‐3‐methoxyisocoumarins 2 , can be obtained by a one‐pot process from α‐substituted 2‐bromo‐β‐methoxystyrenes 1 . Thus, lithium 2‐(1‐aryl(or methyl)‐2‐methoxyethenyl)benzoates are conveniently generated via the Br/Li exchange between 1 and BuLi, followed by the action of CO₂ on the resulting α‐substituted 2‐lithio‐β‐methoxystyrenes. Upon treating with concentrated HCl at room temperature, these lithium benzoates undergo lactonization to provide the desired 3,4‐dihydroisocoumarins 2 in relatively good yields.     

Determination of hydrogen ion by ion chromatography (IC) with sulfonated cation-exchange resin as the stationary phase and aqueous EDTA (ethylenediamine-N,N,N′,N′-tetraacetic acid) solution as the mobile phase

An ion chromatographic (IC) method has been developed for determination of hydrogen ion (H⁺). It is based on the use of sulfonated cation-exchange resin as stationary phase, aqueous ethylenediamine-N,N,N′,N′-tetraacetic acid (dipotassium salt, EDTA-2K, written as K₂H₂Y) solution as mobile phase, and conductivity for detection. H⁺ was separated mainly by cation-exchange, but its elution was accelerated by the presence of EDTA. The order of elution for the model cations was H⁺ > Li⁺ > Na⁺ > NH₄ ⁺ > Ca²⁺ > > Mg²⁺. A sharp and highly symmetrical peak was obtained for H⁺ and this was attributed to the capacity of H₂Y₂ ^2– to receive and bind H⁺. H⁺ was detected conductiometrically and detector response (reduction in conductivity as a result of H⁺+H₂Y^2–→H₃Y^–) was linearly proportional to the concentration of H⁺ in the sample. The detection limit for H⁺ with this IC system was better than 4.7 μmol L^–1. A significant advantage of this method was the ability to separate and determine, in one step, H⁺ and other cations. The successful determination of H⁺ and other cation species in real acid-rain samples demonstrated the usefulness of this method.     

Determination of localized states in porous silicon

We determined the density of state distribution near the Fermi level in porous silicon from the analysis of the current–voltage (J–V) and the current–thickness (J–T) characteristics in the space-charge-limited-current (SCLC) regime. The distribution exhibits a minimum density at the Fermi level, which is similar to the U-shape-trap-distribution observed in crystalline Si–SiO₂ interface or in amorphous Si. Theoretical analysis well explains both the J–V and the J–L characteristics, which implies that the current flow is entirely controlled by localized states situated at the quasi-Fermi level.     

Adsorption and biotransformation of 17β-estradiol in biological activated carbon adsorbers

As the first systematic study dealing with the adsorption of estrogens by granular activated carbon (GAC), the removal behavior of 17β-estradiol (E2) and its biotransformation product of estrone (E1) in fixed GAC columns was examined using four biological activated carbon (BAC) columns (BAC-1～BAC-4) generated by coating four GAC columns with detached microorganisms from the riverbed sediment of a representative drinking river water source containing lower content of natural organic matter (NOM). For comparison, parallel adsorption experiments were also performed using another four GAC columns (GAC-1～ GAC-4) packed by strictly following the configurations of four BAC columns. Adsorption experimental results obtained by intermittently spiking E2 over a total running period about 350 days into the river water mixed with or without a peaty water containing higher content of NOM showed that E2 was readily removed by adsorption and the combined adsorption/biodegradation. The vertical profiles of E2 and E1, which have great significance for better understanding and optimization of the adsorption process for removal of human estrogens, were also obtained.     

Synthesis and structure revision of litseaone A

Litseaone A, isolated from the stem barks of Litsea rubescens and Litsea pedunculata, is a chalcone derivative with a novel spiro-epoxide moiety. The structural revision of litseaone A was achieved by the racemic synthesis of the proposed structure and the asymmetric synthesis of the revised structure. The major tautomeric structure of litseaone A and the relative stereochemistry at the epoxide carbon center were also clarified.     

Anomalous binding profile of phenylboronic acid with N-acetylneuraminic acid (Neu5Ac) in aqueous solution with varying pH

Borates are known to interact with carbohydrate moieties expressed on the surface of biological membranes of a variety of cells, viruses, bacteria, and fungi. This study revealed the anomalous binding profile of borate in aqueous solution with N-acetylneuraminic acid (Neu5Ac, sialic acid) as a potential receptor site on the surfaces of biological membranes using (11)B, (1)H, (13)C, and (15)N nuclear magnetic resonance spectroscopies. 3-(Propionamido)phenylboronic acid (PAPBA) was chosen as the model borate compound. The equilibrium constant (K) for Neu5Ac binding to PAPBA was compared with those for glucose, mannose, and galactose, which are the major carbohydrate constituents of glycoproteins and glycolipids expressed on biological membranes. In the Neu5Ac/PAPBA system, the unusual pH dependency of the K values, a decrease in K with increasing pH, was observed, suggesting the formation of a trigonal-formed complex stabilized by the coordination of an amide group of Neu5Ac at the C-5 position to the boron atom, forming intramolecular B-N or B-O bonding. Furthermore, the anomalously high complexing ability at physiological pH 7.4 was confirmed for this system, with the K value 37.6 which is approximately 7 times higher than that for glucose. This exceptionally high value of K at physiological pH, compared to those of other sugars, strongly suggests that the boronic acid selectively recognizes the Neu5Ac residues of the glycosylated components including glycoproteins and gangliosides existing on the surface of the biological membranes.