Synthesis and characterization of titanium and zirconium complexes with silicone-bridged phenoxycyclopentadienyl ligands

Dimethylsilyl(2,3,4,5-tetramethylcyclopentadienyl)(3-tert-butyl-5-methyl-2-phenoxy)titanium dichloride (1a), a useful catalyst precursor for olefin copolymerization, was synthesized at high yield starting from allyl-protected phenolic ligand 3a,which was first treated with 2 equiv. of n-BuLi to selectively give the dilithium salt of 3a along with 1-heptene, a coupling product of a protected allyl ether moiety and butyl anion. Addition of TiCl₄ to the resulting dilithium salt of 3a in toluene afforded 1a in 50% isolated yield. This methodology could be applied to the preparation of related titanium and zirconoium complexes 1b-1d, 8 with silicone-bridged Cp-phenoxy ligands, whereas the reaction starting from methyl-protected precursor 2a did not produce the zirconium complex 8. Copolymerization of ethylene and 1-hexene with the newly prepared complexes was also investigated.     

Synthesis and characterization of titanium alkyl, oxo, and diene complexes bearing a SiMe2-bridged phenoxy-cyclopentadienyl ligand and their catalytic performance for copolymerization of ethylene and 1-hexene

A series of titanium complexes bearing a SiMe₂-bridged phenoxy-cyclopentadienyl ligand were synthesized and characterized, and their catalytic behavior for copolymerization of ethylene and 1-hexene was investigated. Treatment of dimethylsilyl(2,3,4,5-tetramethylcyclopentadienyl)(3-tert-butyl-5-methyl-2-phenoxy)-titanium dichloride (1) with appropriate nucleophiles afforded dimethoxy complex 2, dimethyl complex 3, and dibenzyl complex 4. Standing a toluene solution of 2 in air afforded a dinuclear μ-oxo complex 5 as a single isomer. 1,3-Diene complexes 6-8 were prepared by reaction of 1 with the corresponding 1,3-dienes in the presence of 2 equiv. of n-BuLi. X-ray analysis of 1,4-diphenyl-1,3-butadiene complex 6 revealed that the diene ligand coordinates to titanium in s-cis fashion with a prone orientation. The newly prepared titanium complexes were applied to copolymerization of ethylene and 1-hexene upon activation with AlⁱBu₃ and [C₆H₅NMe₂H][B(C₆F₅)₄]. It was found that the alkyl complexes 3-4 and the diene complexes 6-8 showed higher activities than 1 at elevated temperature.     

Preparation of hole transporting polymers by condensation polymerization of triphenylamine derivatives

Hole transporting polymers were prepared by condensation polymerization of triphenylamine and N,N,N',N'‐tetraphenylbenzidine (TPD) having alkyl group with aldehydes in the presence of p‐toluenesulfonic acid. The obtained polymers had molecular weight higher than 10,000 and good film formation ability. It was found that the aromatic amine monomers were connected with aldehyde monomer at the p‐position of the phenyl group. TPD‐aldehyde polymers had almost the same UV absorption and redox potentials as those of TPD monomer indicating that the electronic structure of amine unit did not change by the polymerization. The hole transporting mobility was in the range of 10⁻³‐10⁻⁶cm²/Vs. The electroluminescent device consisting of ITO/TPD polymer/Alq/Mg‐Ag had a maximum luminance of 9000 cd/m².     

Theoretical study of sorption-induced bending of polypyrrole films

Polypyrrole films containing perchlorate were electrochemically synthesized and the bending and recovery motion of the films obtained has been investigated. It was found that the thickness of the film and ambient relative humidity (RH) were crucial to the motion of film: An increase of the film thickness decreased the displacement of the bending but increased the bending stress. On the other hand, an increase of the ambient RH decreased both functions. The motion of film was caused by the difference of expansion on both sides of the film owing to anisotropic sorption of water vapor, which could be expressed by the diffusion-limited bending model. The diffusion coefficients calculated from the bending and recovery motion at 25°C, RH 50% were 12.2 × 10⁻⁸ cm² s⁻¹ and 3.5 × 10⁻⁸ cm² s⁻¹, respectively. The maximum expansion of the film surface calculated from the bending curve was about 0.36%. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2237–2246, 1998     

Development of a small X-ray source using an ultraviolet laser and pyroelectric crystal

We investigate a miniaturized X-ray source using an ultraviolet (UV) laser and a pyroelectric crystal and discuss potential applications in medicine. The UV laser is the fourth harmonic of a Nd:YAG laser with a wavelength of 266 nm, repetition rate of 10 Hz, and pulse energy of 40 mJ. The pyroelectric crystal is a LiNbO₃ cylinder of diameter 10 mm and length 6 mm. The prototype X-ray source we fabricated is an aluminum parallelepiped of dimensions 3 × 3 × 5 cm. The X-ray count rate of the X-ray source is maximized at approximately 1,400 cps for UV laser irradiation of approximately 5 min. After 30 min of irradiation by the UV laser, the temperature of the pyroelectric crystal rose from 295 K to 312 K. The principles of X-ray generation ensure that X-ray sources using UV lasers and pyroelectric crystals offer ample opportunity for miniaturization. We believe the X-ray source developed in this work is suitable for medical applications, although further study is needed to address points such as increasing the X-ray count rate and adjusting the temperature of the pyroelectric crystal.     

A compact permanent‐magnet system for measuring magnetic circular dichroism in resonant inelastic soft X‐ray scattering

A compact and portable magnet system for measuring magnetic dichroism in resonant inelastic soft X‐ray scattering (SX‐RIXS) has been developed at the beamline BL07LSU in SPring‐8. A magnetic circuit composed of Nd–Fe–B permanent magnets, which realised ～0.25 T at the center of an 11 mm gap, was rotatable around the axis perpendicular to the X‐ray scattering plane. Using the system, a SX‐RIXS spectrum was obtained under the application of the magnetic field at an angle parallel, nearly 45° or perpendicular to the incident X‐rays. A dedicated sample stage was also designed to be as compact as possible, making it possible to perform SX‐RIXS measurements at arbitrary incident angles by rotating the sample stage in the gap between the magnetic poles. This system enables facile studies of magnetic dichroism in SX‐RIXS for various experimental geometries of the sample and the magnetic field. A brief demonstration of the application is presented.     

Preparation of organic acid anion-modified magnesium hydroxides by coprecipitation: A novel material for the uptake of heavy metal ions from aqueous solutions

New layered magnesium hydroxides whose brucite layers had been bridged with malate²⁻ and tartrate²⁻ were prepared by dropwise addition of Mg(NO₃)₂ to malate and tartrate solutions at a constant pH of 10.5. Malate²⁻ and tartrate²⁻ may have been also absorbed on the surfaces of hydroxides. In the case of using citrate solution, Mg(OH)₂ absorbed with citrate³⁻ was produced. These materials were found to take up Cu²⁺ rapidly from an aqueous solution at pH 5.0. Copper uptake by precipitates is attributed to the formation of chelate complexes of Cu²⁺ with citrate³⁻, malate²⁻, and tartrate²⁻.     

Silver-catalyzed cross-coupling reactions of alkyl bromides with alkyl or aryl Grignard reagents

Treatment of secondary or tertiary alkyl bromides with alkyl Grignard reagents in the presence of catalytic amounts of silver bromide and potassium fluoride in CH₂Cl₂ afforded the corresponding cross-coupling products in reasonable yields. Moreover, silver showed catalytic activity for the cross-coupling reactions of alkyl bromides with aryl Grignard reagents.