Improvement of Ni/SDC anode by alkaline earth metal oxide addition for direct methane–solid oxide fuel cells

The anodic performances of Ni/CeO₂–Sm₂O₃(Ni/SDC) modified by the addition of alkaline earth metal oxides (MgO, CaO, and SrO) were investigated for direct oxidation of CH₄ in solid oxide fuel cells (SOFCs). Although the initial power density of cell with Ni/SDC anode modified by the addition of CaO was slightly lower than that of cell with Ni/SDC, the former anode exhibited an excellent stability compared to the latter one. Such a high stability of Ni–CaO/SDC anode may come from the inhibition of carbon deposition in addition to the retained ionic conductivity of anode.     

Study on the base-catalyzed reverse vinylogous aldol reaction of (4abeta,5beta)-4,4a,5,6,7,8-hexahydro-5-hydroxy-1,4a-dimethylnaphthalen-2(3H)-one under Robinson annulation conditions

[reaction: see text] We have proposed a pathway for the base-catalyzed reverse vinylogous aldol reaction of (-)-(4abeta,5beta)-4,4a,5,6,7,8-hexahydro-5-hydroxy-1,4a-dimethylnaphthalen-2(3H)-one [(-)-8] under Robinson annulation conditions. For confirmation, 4-(2,6-dimethyl-3-oxocyclohex-1-enyl)butanal (11) and 4-(2,6-dimethyl-5-oxocyclohex-1-enyl)butanal (12), both of which potentially produce enolate I, were synthesized regioselectively. Unexpectedly, 11 gave a complex mixture, including only a trace amount of (+/-)-8 (less than 5% yield), under these basic conditions. To the contrary, 12 cleanly afforded (+/-)-8 in 66% yield. This result provides evidence for our proposed mechanism of the above reaction.     

Efficient construction of the hexacyclic ring core of palau'amine: the pKa concept for proceeding with unfavorable equilibrium reactions

Palau''amine has received a great deal of attention as an attractive synthetic target due to its intriguing molecular architecture and significant immunosuppressive activity, and we achieved its total synthesis in 2015. However, the synthesized palau''amine has not been readily applicable to the mechanistic study of immunosuppressive activity, because it requires 45 longest linear steps from a commercially available compound. Here, we report the short-step construction of the ABCDEF hexacyclic ring core of palau''amine. The construction of the CDE tricyclic ring core in a single step is achieved by our pK_a concept for proceeding with unfavorable equilibrium reactions, and a palau''amine analog without the aminomethyl and chloride groups is synthesized in 20 longest linear steps from the same starting material. The palau''amine analog is confirmed to retain the immunosuppressive activity. The present synthetic approach for a palau''amine analog has the potential for use in the development of palau''amine probes for mechanistic elucidation.

A palau''amine analog (2) was synthesized from 2-cyclopentenone in 20 steps. The construction of the CDE tricyclic ring core in a single step is achieved by our pK_a concept for proceeding with the unfavorable equilibrium reactions.     

Microtomography of Imbibition Phenomena and Trapping Mechanism

Water imbibition during the waterflooding process of oil production only sweeps part of the oil present. After water disrupts the oil continuity, most oil blobs are trapped in porous rock by capillary forces. Developing an efficient waterflooding scheme is a difficult task; therefore, an understanding of the oil trapping mechanism in porous rock is necessary from a microscopic viewpoint. The development of microfocused X-ray CT scanner technology enables the three-dimensional visualization of multiphase phenomena in a pore-scale. We scanned packed glass beads filled with a nonwetting phase (NWP) and injected wetting phase (WP) in upward and downward injections to determine the microscopic mechanism of immiscible displacement in porous media and the effects of buoyancy forces. We observed the imbibition phenomena for small capillary numbers to understand the spontaneous imbibition mechanism in oil recovery. This study is one of the first attempts to use a microfocused X-ray CT scanner for observing the imbibition and trapping mechanisms. The trapping mechanism in spontaneous imbibition is determined by the pore configuration causing imbibition speed differences in each channel; these differences can disrupt the oil continuity. Gravity plays an important role in spontaneous imbibition. In upward injection, the WP flows evenly and oil is trapped in single or small clusters of pores. In downward injection, the fingering phenomena determine the amount of trapped oil, which is usually in a network scale. Water breakthrough causes dramatic decrease in the oil extraction rate, resulting in lower oil production efficiency.     

Survey meter combining CVD diamond and silicon detectors for wide range of dose rates and high accumulated doses

We have developed a prototype of a survey meter combining a CVD diamond detector and silicon detectors to appropriately take temporal measurements of γ-ray radiations over a wide range of the dose rates and to measure high accumulated doses of γ-ray radiations. In order to carry out this, at first, we have studied the radiation hardness of diamond detectors suitably fabricated with high-quality single-crystalline CVD diamond films to confirm that such CVD diamond detectors have greatly superior radiation hardness, compared with commercially available silicon detectors. It is evidenced that the performance of the CVD diamond detector did not significantly change even after heavy γ-ray irradiation of 0.7 MGy while the silicon detectors have a remarkable increase in the dark current, a detection peak shift to the low energy side, and a decrease in detection counts for 5.486-MeV α particles. Due to a size limitation of the CVD diamond detector, such a CVD diamond detector was combined with six commercially available silicon detectors to fabricate a survey meter which can appropriately work under severe irradiation conditions, or, at accumulated doses larger than at least 0.5 MGy and which can cover a wide range of the dose rates from 1 μGy/h to at least 1 kGy/h. The prototype survey meter had a practically useful linearity in this dose rate range. Thus, we have confirmed that such a diamond-Si combined survey meter can be put into practical use.     

Total synthesis of (±)-lysidicin A

Lysidicin A, which has been isolated from Lisidicie rhodostegia possesses complicated structure. A total synthesis of lysidicin A has been achieved and is described herein. The key reaction is single and cascade Claisen rearrangements.     

Determination of hydrogen ion by ion chromatography (IC) with sulfonated cation-exchange resin as the stationary phase and aqueous EDTA (ethylenediamine-N,N,N′,N′-tetraacetic acid) solution as the mobile phase

An ion chromatographic (IC) method has been developed for determination of hydrogen ion (H⁺). It is based on the use of sulfonated cation-exchange resin as stationary phase, aqueous ethylenediamine-N,N,N′,N′-tetraacetic acid (dipotassium salt, EDTA-2K, written as K₂H₂Y) solution as mobile phase, and conductivity for detection. H⁺ was separated mainly by cation-exchange, but its elution was accelerated by the presence of EDTA. The order of elution for the model cations was H⁺ > Li⁺ > Na⁺ > NH₄ ⁺ > Ca²⁺ > > Mg²⁺. A sharp and highly symmetrical peak was obtained for H⁺ and this was attributed to the capacity of H₂Y₂ ^2– to receive and bind H⁺. H⁺ was detected conductiometrically and detector response (reduction in conductivity as a result of H⁺+H₂Y^2–→H₃Y^–) was linearly proportional to the concentration of H⁺ in the sample. The detection limit for H⁺ with this IC system was better than 4.7 μmol L^–1. A significant advantage of this method was the ability to separate and determine, in one step, H⁺ and other cations. The successful determination of H⁺ and other cation species in real acid-rain samples demonstrated the usefulness of this method.     

Determination of localized states in porous silicon

We determined the density of state distribution near the Fermi level in porous silicon from the analysis of the current–voltage (J–V) and the current–thickness (J–T) characteristics in the space-charge-limited-current (SCLC) regime. The distribution exhibits a minimum density at the Fermi level, which is similar to the U-shape-trap-distribution observed in crystalline Si–SiO₂ interface or in amorphous Si. Theoretical analysis well explains both the J–V and the J–L characteristics, which implies that the current flow is entirely controlled by localized states situated at the quasi-Fermi level.