Overproduction of riboflavin by anArthrobacter sp. mutant resistant to 5-fluorouracil

Effects of pH and dissolved oxygen concentration on batchwise riboflavin production by a 5-fluorouracil (5-FU)-resistant mutant ofArthrobacter sp. were investigated. The reaction was carried out in a jar fermentor. The optimal pH of culture medium was around 7.3. Dissolved oxygen concentration was almost constant during fermentation at 600 rpm of agitation rate. Production of riboflavin reached a maximum of 160 mg/L after 70 h fermentation under the agitation rate of 600 rpm, aeration rate of 1.0 L/min, and pH 7.0.     

Effect of titanium dioxide on photostability of solid-state mequitazine

TiO(2) has been widely used in pharmaceutical products, and it also has been used as a photocatalyst. In this study, the influence of photocatalytic activity on the stability of solid-state mequitazine, an H(1)-blocker, was investigated. The photo-degradation of mequitazine with TiO(2) occurred under irradiation with both light sources. The degree of degradation of mequitazine with anatase was higher than that of rutile. The degradation was significantly enhanced with increasing relative humidity. The relationship between the apparent degradation rate constant and water vapor pressure could be clearly described by a simple power law. The major photo-degradation products of mequitazine, resulting from photocatalytic activity of TiO(2), were mequitazine-S-oxide and mequitazine-sulphone. A remarkable degradation of mequitadine occurred with addition of TiO(2), and its photocatalytic activity was controlled by water vapor pressure. The photo-degradation of mequitazine with TiO(2) is a different process from mequitazine without TiO(2), because mequitazine-S-oxide and mequitazine-sulphone are not formed with normal photo-degradation of mequitazine.     

A quantum chemical study of interchain hopping model of negatively charged solitons in polyacetylene

Phonon-assisted interchain hopping of negatively charged solitons in polyacetylene has been studied using a local chemical reaction model CH + CH₄ → CH₄ + CH. Quantum chemical characteristics of the electron transfer process have been analyzed in terms of the dynamic electron density and the mutual polarization moment. The CH stretching vibrational motion of CH₄, which is a local model of the sp³ defect, has been found to play a significant role for the electron transfer. The excitation of the corresponding vibrational mode of the sp³ defect would promote the interchain hopping of the charged soliton. The electron transfer process has also been studied in terms of the “regional” density functional theory. It has been shown that the driving force of the electron transfer is represented by the regional chemical potentials.     

The study of electron beam flue gas treatment for coal-fired thermal plant in Japan

The fundamental research work with simulated coal-fired flue gas was performed in JAERI to get basic data for electron beam treatment of flue gas from thermal power plants in Japan. The standard condition of the experiments was set to be the same as that of next large scale pilot test in Nagoya. The concentrations of NO_x and SO_x were 225 ppm and 800 ppm, respectively. The temperature of the system was 65°C. The effect of multiple irradiation was observed for NO_x removal. The target SO_x and NO_x removals (94% and 80%, respectively) with low NH₃ leakage (less than 10 ppm) were achieved at 9 kGy irradiation with 0.9 NH₃ stoichiometry during 7 hours continuous operation. The facility for the pilot plant (12,000 Nm³/hr) has just built at the site of Shin-Nagoya power plant of Chubu Electric Power Company and will be started in full operation in November 1992.     

Simultaneous polymerization and formation of polyacetylene film on the surface of concentrated soluble Ziegler-type catalyst solution

A direct method of simultaneously polymerizing and forming acetylene monomer to produce uniformly thin films of polyacetylene was investigated in terms of catalyst system, catalyst concentration, and polymerization temperature. The best catalyst was a Ti(OC₄H₉)₄–Al(C₂H₅)₃ system (Al/Ti = 3–4) and the critical concentration was 3 mmole/l. of Ti(OC₄H₉)₄. Below the critical concentration, only a solid or a powder was obtained. The configuration of the polymers obtained depends strongly upon the polymerization temperature. Thus an all-cis polymer was obtained at temperatures lower than ?78°C, whereas an all-trans polymer resulted at temperatures higher than 150°C. Observations either in an electron microscope by direct transmission or in a scanning electron microscope showed that the film is composed of an accumulation of fibrils about 200–300 Å in width and of indefinite length.     

Cobalt-catalyzed cross-coupling reactions of alkyl halides with allylic and benzylic Grignard reagents and their application to tandem radical cyclization/cross-coupling reactions

Details of cobalt-catalyzed cross-coupling reactions of alkyl halides with allylic Grignard reagents are disclosed. A combination of cobalt(II) chloride and 1,2-bis(diphenylphosphino)ethane (DPPE) or 1,3-bis(diphenylphosphino)propane (DPPP) is suitable as a precatalyst and allows secondary and tertiary alkyl halides--as well as primary ones--to be employed as coupling partners for allyl Grignard reagents. The reaction offers a facile synthesis of quaternary carbon centers, which has practically never been possible with palladium, nickel, and copper catalysts. Benzyl, methallyl, and crotyl Grignard reagents can all couple with alkyl halides. The benzylation definitely requires DPPE or DPPP as a ligand. The reaction mechanism should include the generation of an alkyl radical from the parent alkyl halide. The mechanism can be interpreted in terms of a tandem radical cyclization/cross-coupling reaction. In addition, serendipitous tandem radical cyclization/cyclopropanation/carbonyl allylation of 5-alkoxy-6-halo-4-oxa-1-hexene derivatives is also described. The intermediacy of a carbon-centered radical results in the loss of the original stereochemistry of the parent alkyl halides, creating the potential for asymmetric cross-coupling of racemic alkyl halides.     

Simultaneous determination of calcium and magnesium by using a flow-injection system with simultaneous injection of two sample plugs and a masking agent plug

A flow-injection system is described for the simultaneous determination of calcium and magnesium with simultaneous injection of two sample plugs and a masking agent plug and with a single detector. The system utilizes the simultaneous injection of an ethylene glycol-bis(2-aminoethylether)-N,N,N',N'-tetra-acetic acid plug and two small sample plugs into the same carrier stream and which are merged downstream with 3,3'-bis[N,N-bis(carboxymethyl)aminomethyl)]-o-cresolphthalein solution for spectrophotometric determination of calcium and magnesium. The results for the analysis of natural waters by the proposed method correspond well with those obtained by the conventional titration method with ethylenediaminetetra-acetic acid, and showed good reproducibility. The rate of analysis is about 15 samples/hr.     

α-Carboxylation reaction of carbonyl compounds with bromomagnesium ureide-carbon dioxide adducts

Bromomagnesium ureide-carbon dioxide adducts, models of the carboxylated biotin complex, undergo caboxylation of a variety of carbonyl compounds in good yield.     

New formation of a 1,3-dipole in the reaction of adamantanone azine with triazolinediones: In connection with reactivity toward singlet oxygen

Tricyclo[3.3.1.1]decanone azine ( adamantanone azine ) reacts with 4-substituted 1,2,4-triazoline-3,5-diones under elimination of diazo adamantane to give a 1,3-dipole ( “azomethinimine” ), which on treatment with dipolahophiles affords the [ 2 + 3] -cycloadducts. The reaction is compared with singlet oxygen oxidation.     

Heterogeneous structure of silk fibers from Bombyx mori resolved by 13C solid-state NMR spectroscopy

The molecular conformation of silk fibrion is characterized by solid-state 13C NMR before spinning (silk I structure) and after spinning (silk II structure). We compare native silk fibers with the quasi-crystalline Cp-fraction and a synthetic model peptide (Ala-Gly)15, both of which can be converted either into silk I by dialysis from 9 M LiBr or into silk II by treatment with formic acid. Our results demonstrate that silk II fibers are intrinsically heterogeneous, consisting of beta-sheets, distorted beta-turns, and distorted beta-sheets. This higher-order heterogeneity is revealed by the 13C-NMR Cbeta-peak of Ala, indicating that the Ala side chains are stacked partially in parallel and partially face-to-face, at a ratio of 1:2.