Effect of the cooling rate on dimerization of C60(•-) in fullerene salt (DMI+)2·(C60(•-))·{Cd(Et2NCS2)2I-}

The salt (DMI(+))(2)·(C(60)(?-))·{Cd(Et(2)NCS(2))(2)I(-)} (1) containing fullerene radical anions, the anions of cadmium diethyldithiocarbamate iodide, and N,N'-dimethylimidazolium cations was obtained. Fullerenes are monomeric in 1 at 250 K and form three-dimensional packing in which each fullerene has nearly tetrahedral surroundings from neighboring fullerenes. Fullerenes with a shorter interfullerene center-to-center distance of 10.031(2) ? form spiral chains arranged along the lattice c axis. The convolution consists of four fullerene molecules. Dimerization realized in 1 within the spiral chains below 135 K manifests a strong dependence on the cooling rate. The "frozen" monomeric phase was obtained upon instant quenching of 1. This phase is stable below 95 K for a long time but slowly converted to the dimeric phase at T > 95 K. It exhibits a weak antiferromagnetic interaction of spins below 95 K (the Weiss temperature is -4 K), which results in the splitting of the electron paramagnetic resonance (EPR) signal into two components below 10 K. A disordered phase containing both C(60)(?-) monomers and singly bonded (C(60)(-))(2) dimers with approximately 0.5/0.5 occupancies is formed at an intermediate cooling rate (for 20 min). The position of each fullerene in this phase is split into three positions slightly shifted relative to each other. The central position corresponds to nonbonded fullerenes with interfullerene center-to-center distances of 9.94-10.00 ?. Two other positions are coincided to dimeric fullerenes formed with the right and left fullerene neighbors within the spiral chain. This intermediate phase is paramagnetic with nearly zero Weiss temperature due to isolation of C(60)(?-) by diamagnetic species and exhibits a strongly asymmetric EPR signal below 20 K. A diamagnetic phase containing ordered singly bonded (C(60)(-))(2) dimers can be obtained only upon slow cooling of the crystal for 6 h.     

Blockade of inflammatory responses by a small-molecule inhibitor of the Rac activator DOCK2

1. Download : Download high-res image (273KB)
2. Download : Download full-size image

Highlights? CPYPP binds to DOCK2 DHR-2 domain and inhibits its catalytic activity ? CPYPP inhibits DOCK2-mediated Rac activation in cells ? The structural features of CPYPP required for its inhibitory effect were revealed ? CPYPP inhibits lymphocyte migration and activation in vitro and in vivo     

Efficient eosin y dye-sensitized solar cell containing Br-/Br3- electrolyte

We found that Br-/Br3- is more suitable than an I-/I3- couple in dye-sensitized solar cells in terms of higher open-circuit photovoltage (Voc) production and higher overall energy conversion efficiency (eta) if the dye sensitizer has a more positive potential than that of Br-/Br3-. Under simulated AM1.5 one sun, an eosin Y dye-sensitized solar cell containing 0.4 M LiBr + 0.04 M Br2 electrolyte in acetonitrile yielded a short-circuit photocurrent (Jsc) of 4.63 mA cm(-2), Voc of 0.813 V, and fill factor (FF) of 0.693, corresponding to 2.61% of eta. Under the same conditions except for the electrolyte 0.4 M LiI + 0.04 M I2 in acetonitrile instead, the device produced 1.67% of eta (Jsc = 5.15 mA cm(-2), Voc = 0.451 V, FF = 0.721). Replacement of I-/I3- with Br-/Br3- in eosin Y dye-sensitized solar cells yielded a significant increase in Voc offset by slight decreases in Jsc and FF, leading to an increase in eta by 56%. The significant gain in Voc was attributed to the enlarged energy level difference between the redox potential of the electrolyte and the Fermi level of TiO2 and the suppressed charge recombination as well. The rate for charge recombination between bromine and the injected electrons was determined to be first order in bromine.     

Photophysical and (photo)electrochemical properties of a coumarin dye

A new coumarin dye, cyano-{5,5-dimethyl-3-[2-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)vinyl]cyclohex-2-enylidene}-acetic acid (NKX-2753), was prepared and characterized with respect to photophysical and electrochemical properties. It was employed as a dye sensitizer in dye-sensitized solar cells and showed efficient photon-to-electron conversion properties. The photocurrent action spectrum exhibited a broad feature with a maximum incident photon-to-electron conversion efficiency (IPCE) of 84% at 540 nm, which is comparable to that for the famous red dye RuL2(NCS)2 (known as N3), where L stands for 2,2'-bipyridyl-4,4'-dicarboxylic acid. The sandwich-type solar cell with NKX-2753, under illumination of full sun (AM1.5, 100 mW cm(-2)), produced 16.1 mA cm(-2) of short-circuit photocurrent, 0.60 V of open-circuit photovoltage, and 0.69 of fill factor, corresponding to 6.7% of overall energy conversion efficiency using 0.1 M LiI, 0.05 M I2, 0.1 M guanidinium thiocyanate, and 0.6 M 1,2-dimethyl-3-n-propyl-imidazolium iodide in dry acetonitrile as redox electrolyte. In comparison with its analogue NKX-2586 (Langmuir 2004, 20, 4205), NKX-2753 with an extra side ring on the alkene chain produced much higher IPCE values at the same conditions. The side ring acted as a spacer to efficiently prevent dye aggregation when adsorbed on the TiO2 surface, resulting in significant improvements of short-circuit photocurrent, open-circuit photovoltage, and fill factor compared with NKX-2586 that aggregated on the TiO2 surface.     

Oligothiophene-containing coumarin dyes for efficient dye-sensitized solar cells

We have developed oligothiophene-containing coumarin dyes fully functionalized for dye-sensitized nanocrystalline TiO(2) solar cells (DSSCs). DSSCs based on the dyes gave good performance in terms of incident photon-to-current conversion efficiency (IPCE) in the range of 400-800 nm. A solar energy-to-electricity conversion efficiency (eta) of 7.4% was obtained with a DSSC based on 2-cyano-3-[5'-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)-[2,2']bithiophenyl-5-yl]acrylic acid (NKX-2677) under simulated AM 1.5G irradiation (100 mW cm(-2)) with a mask: short-circuit current density (J(sc)) = 13.5 mA cm(-2); open-circuit voltage (V(oc)) = 0.71 V; fill factor (FF) = 0.77. Transient absorption spectroscopy measurements indicated that electron injection from NKX-2677 to the conduction band of TiO(2) is very rapid (<100 fs), which is much faster than the emission lifetime of the dye (1.0 ns), giving a highly efficient electron injection yield of near unity.     

Electron beam treatment of lignite-burning flue gas with high concentrations of sulfur dioxide and water

Experiments were carried out to investigate the removals of SO₂ and NO_x from simulated lignite-burning flue gas containing SO₂ (4800 ppm), NO (320 ppm) and H₂O (22%) by electron beam irradiation. Removal efficiencies of SO₂ and NO_x were achieved to reach 97 and 88% at 70°C, and 74 and 85% at 80°C, respectively, with the dose of 10.3 kGy without NH₃ leakage. The higher removal efficiencies of SO₂ and NO_x were observed in simulated lignite-burning flue gas than in coal-fired flue gas containing 800 ppm of SO₂, 225 ppm of NO and 7.5% H₂O at the same treatment condition. The higher removal efficiencies were attributed to the higher concentrations of SO₂, H₂O, and added NH₃. Simulation calculations indicated that the higher concentrations of these components enhance the effective radical reactions to oxidize NO to form NO₂ with HO₂ radical, and to oxidize SO₂ to form SO₃ with OH radical and O₂. The reactions of NO_x with N and NH₂ radicals to produce N₂ and N₂O also promote the NO_x removal. By-product was determined to be the mixture of (NH₄)₂SO₄ and NH₄NO₃ containing a small amount of H₂SO₄.     

Study of thermodynamic stabilities of polytypes of n-C36H74 by solubility measurements and incoherent inelastic neutron scattering

The thermodynamic properties of the two polytypes of n-hexatriacontane (n-C36H74), single-layered structure Mon and double-layered structure Orth II have been investigated by means of solubility measurements and incoherent inelastic neutron scattering. The solubility measurements reveal that Orth II is more stable than Mon by 1.2 kJ/mol because of the advantage of larger entropy. The neutron scattering measurements show that the vibrational modes of Orth II shift to the lower frequencies compared with those of Mon in the frequency region below 120 cm(-1). The advantage of Orth II in vibrational entropy due to the low-frequency shifts is estimated to be 9.6 J K(-1)/mol at 288 K under the harmonic approximation, which nearly agrees with the entropy difference of 6.8 J K(-1)/mol between Mon and Orth II determined by solubility measurements. These results suggest that the difference in vibrational entropy due to low-frequency modes mainly contributes to the relative thermodynamic stabilities of polytypic structures of long-chain compounds. From the frequency of methyl torsional mode, it is suggested that the cohesive force at the lamellar interface is stronger in Mon than in Orth II.     

Osmium(III) and Osmium(V) Complexes Bearing a Macrocyclic Ligand: A Simple and Efficient Catalytic System for cis‐Dihydroxylation of Alkenes with Hydrogen Peroxide

A simple protocol that uses [Os^III(OH)(H₂O)(L ‐N₄Me₂)](PF₆)₂ ( 1 ; L ‐N₄Me₂=N,N′‐dimethyl‐2,11‐diaza[3.3](2,6)pyridinophane) as a catalyst and H₂O₂ as a terminal oxidant for efficient cis‐1,2‐dihydroxylation of alkenes is presented. Unfunctionalized (or aliphatic) alkenes and alkenes/styrenes containing electron‐withdrawing groups are selectively oxidized to the corresponding vicinal diols in good to excellent yields (46–99 %). In the catalytic reactions, the stoichiometry of alkene:H₂O₂ is 1:1, and thus the oxidant efficiency is very high. For the dihydroxylation of cyclohexene, the catalytic amount of 1 can be reduced to 0.01 mol % to achieve a very high turnover number of 5500. The active oxidant is identified as the Os^V(O)(OH) species ( 2 ), which is formed via the hydroperoxide adduct, an Os^III(OOH) species. The active oxidant 2 is successfully isolated and crystallographically characterized.     

Ni-catalyzed α-arylation of secondary α-bromo-α-fluoro-β-lactam: cross-coupling of a secondary fluorine-containing electrophile

A highly diastereoselective cross-coupling reaction of an α-bromo-α-fluoro-β-lactam with a wide range of aryl Grignard reagents was catalyzed by Ni/bis(oxazoline) in yields of up to 98%. The product was obtained diastereoselectively as an anti-isomer. This is the first successful α-arylation of an α-fluoro-β-lactam to produce diverse α-aryl-α-fluoro-β-lactams.