Effects of poly(ethylene glycol) (PEG) concentration on the permeability of PEG-grafted liposomes

Poly(ethylene glycol)-grafted liposomes (PEG-liposomes) were prepared from dipalmitoylphosphatidylcholine (DPPC) with various amounts of distearoyl-N-monomethoxy poly(ethylene glycol)-succinyl-phosphatidylethanolamines (DSPE-PEG) with PEG molecular weights of 1000, 2000, 3000 and 5000. The effects of DSPE-PEG concentration on the permeability of PEG-liposomes were investigated using carboxyfluorescein (CF). In the gel state, the CF leakage from PEG-liposomes was decreased with increasing mole fractions of DSPE-PEG for all PEG molecular weights. In the liquid-crystalline state, the CF leakage from PEG-liposomes containing DSPE-PEG1000 gradually increased with increasing mole fractions of DSPE-PEG, while that of PEG-liposomes whose molecular weight in PEG units was above 2000 rapidly decreased by the addition of DSPE-PEG. Furthermore, no effect of PEG molecular weight on CF leakage was observed. The relationship between the fluorescence polarization of 1,6-diphenyl-1,3,5-hexatriene (DPH) (or 1-(4-trimethylammoniumphenyl)-6-phenyl-1,3,5-hexatriene (TMA-DPH)) and the mole fraction of DSPE-PEG for PEG-liposomes was also investigated. No significant changes in fluorescence polarization of DPH for liposomal bilayer membranes was observed in the gel and liquid-crystalline states due to the addition of DSPE-PEG, while that of TMA-DPH was decreased compared with that of liposomes without DSPE-PEG in both states.     

Oligothiophene-containing coumarin dyes for efficient dye-sensitized solar cells

We have developed oligothiophene-containing coumarin dyes fully functionalized for dye-sensitized nanocrystalline TiO(2) solar cells (DSSCs). DSSCs based on the dyes gave good performance in terms of incident photon-to-current conversion efficiency (IPCE) in the range of 400-800 nm. A solar energy-to-electricity conversion efficiency (eta) of 7.4% was obtained with a DSSC based on 2-cyano-3-[5'-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)-[2,2']bithiophenyl-5-yl]acrylic acid (NKX-2677) under simulated AM 1.5G irradiation (100 mW cm(-2)) with a mask: short-circuit current density (J(sc)) = 13.5 mA cm(-2); open-circuit voltage (V(oc)) = 0.71 V; fill factor (FF) = 0.77. Transient absorption spectroscopy measurements indicated that electron injection from NKX-2677 to the conduction band of TiO(2) is very rapid (<100 fs), which is much faster than the emission lifetime of the dye (1.0 ns), giving a highly efficient electron injection yield of near unity.     

Preparation of monodisperse SiO2 nanoparticles by membrane emulsification using ideally ordered anodic porous alumina

Monodisperse SiO2 particles of nanometer dimensions were fabricated by membrane emulsification using ideally ordered anodic porous alumina. For the preparation of monodisperse emulsion droplets, the dispersed phase was pressed through a porous alumina membrane into the continuous phase. After solidification treatment of the emulsion droplets, prepared spherical SiO2 nanoparticles with uniform sizes were obtained. From scanning electron microscope observation of the obtained particles, it was confirmed that the size distribution of SiO2 nanoparticles is relatively narrow.     

Structural and spectroscopic characterization of (mu-hydroxo or mu-oxo)(mu-peroxo)diiron(III) complexes: models for peroxo intermediates of non-heme diiron proteins

(mu-Hydroxo or oxo)(mu-1,2-peroxo)diiron(III) complexes having a tetradentate tripodal ligand (L) containing a carboxylate sidearm [Fe2(mu-OH or mu-O)(mu-O2)(L)2]n+ were synthesized as models for peroxo-intermediates of non-heme diiron proteins and characterized by various physicochemical measurements including X-ray analysis, which provide fundamental structural and spectroscopic insights into the peroxodiiron(III) complexes.     

The influence of polytypic structures on the M011-->M101 solid-solid phase transition of n-C36H74: an application of the oblique infrared transmission method

The molecular displacements on the M011-->M101 phase transition of n-hexatriacontane (n-C36H74) have been investigated with an IR microscope designed for the oblique infrared transmission method. It has been clarified that two polytypic structures of the M011 modification, single-layered structure (Mon) and double-layered one (Orth II), both transform to the M101 modification of single-layered structure with their respective mechanisms. On the M011(Mon)-->M101 transition, the inclination direction of molecular axis is changed by 90 degrees through an intermediate state in which the molecular chain is set perpendicular to the basal plane of the single crystal. On the other hand, a polymorphic-polytypic composite structural change on the M011(Orth II)-->M101 transition is accomplished through two kinds of molecular displacements occurring alternately along the stacking direction of molecular layers.     

Study of thermodynamic stabilities of polytypes of n-C36H74 by solubility measurements and incoherent inelastic neutron scattering

The thermodynamic properties of the two polytypes of n-hexatriacontane (n-C36H74), single-layered structure Mon and double-layered structure Orth II have been investigated by means of solubility measurements and incoherent inelastic neutron scattering. The solubility measurements reveal that Orth II is more stable than Mon by 1.2 kJ/mol because of the advantage of larger entropy. The neutron scattering measurements show that the vibrational modes of Orth II shift to the lower frequencies compared with those of Mon in the frequency region below 120 cm(-1). The advantage of Orth II in vibrational entropy due to the low-frequency shifts is estimated to be 9.6 J K(-1)/mol at 288 K under the harmonic approximation, which nearly agrees with the entropy difference of 6.8 J K(-1)/mol between Mon and Orth II determined by solubility measurements. These results suggest that the difference in vibrational entropy due to low-frequency modes mainly contributes to the relative thermodynamic stabilities of polytypic structures of long-chain compounds. From the frequency of methyl torsional mode, it is suggested that the cohesive force at the lamellar interface is stronger in Mon than in Orth II.     

Cascade Rearrangement of 5-Cyclopentylidenecyclooctanones

Acid-catalyzed rearrangement of 5-cyclopentylidenecyclooctanone derivatives 9a-c was examined to obtain polyspiropolyquinanes 11a-c, considered to have a unique helical structure, through cascade rearrangement pathways consisting of continuous transannular cyclization followed by successive 1,2-alkyl shifts. The substrates were prepared easily by use of the Wittig or McMurry reaction. Reaction of the 5-cyclopentylidenecyclooctanone (9a) with acid gave the expected dispirotriquinane ketone 11a in high yield. The precise mechanism was elucidated by a deuterium-labeling experiment. In the case of the ketone 9b, having another spiroannulated cyclopentane ring attached on 9a, the trispirotetraquiane 11b was not obtained but the bis-propellane-type tetrahydrofuran 25 was produced exclusively. The 5-(5'-cyclopentylidenecyclooctylidene)cyclooctanone (9c) afforded the polycyclic compounds 27-31, depending on the acid used, instead of the desired tetraspiropentaquinane 11c. The structures of the products were determined by NMR spectral data including 2D (13)C INADEQUATE spectra and X-ray crystallographic analyses. The unexpected rearrangement pathways are also discussed.     

Rapid oligosaccharide synthesis using a fluorous protective group

The Bfp-OH, a novel fluorous protecting reagent, was able to be easily prepared. The Bfp group was readily introduced to a carbohydrate, removed in high yield, and recyclable after cleavage. The use of the Bfp group made it possible to synthesize a pentasaccharide by minimal column chromatography purification. Each synthetic intermediate was able to be easily purified only by simple fluorous-organic solvent extraction and monitored by TLC, NMR, and MS.     

Camdas: An automated conformational analysis system using molecular dynamics

We present an automated conformational analysis program, CAMDAS (Conformational Analyzer with Molecular Dynamics And Sampling). CAMDAS performs molecular dynamics (MD) calculations for a target molecule and samples conformers from the trajectory of the MD. The program then evaluates the similarities between each of the sampled conformers in terms of the root- mean-square deviations of the atomic positions, clusters similar conformers, and finally prints out the clustered conformers. This MD-based conformational analysis is a broadly used method, and CAMDAS is intended to provide a convenient framework for the method. CAMDAS has the ability to find the representative conformers automatically from an arbitrarily given structure of the molecule. The accuracy of the program was examined using N- acetylalanine-N-methylamide, and the obtained result was consistent with that of the systematic search method. In the test calculation of cyclodecane, CAMDAS could identify most of the known conformers and their conformational enantiomers by examining only 5000 conformers. In addition, the potential-scaled method, which we have developed previously as an accelerating technique for MD, could find two additional conformers of cyclodecane that have not been reported. CAMDAS presents a convenient way to find the energetically possible conformers of a molecule, which is needed especially in the early stage of drug design.