Hydroxylated surface of GaAs as a scaffold for a heterogeneous Pd catalyst

A novel use of GaAs, namely, as a scaffold for a heterogeneous palladium catalyst, is proposed. Hydroxy groups on the GaAs surface play important roles. During the adsorption of Pd(OAc)(2) on the GaAs surface, the hydroxy groups attract Pd(ii) species by anion exchange. A subsequent redox reaction proceeds to generate Pd(0) nanoparticles, which are stabilized on the GaAs surface. This process is confirmed by surface-sensitive measurements: diffuse reflection IR spectroscopy and X-ray photoelectron spectroscopy. Moreover, a more bulk-sensitive measurement, hard X-ray photoemission spectroscopy with synchrotron radiation, also supported our considerations. The amounts of Pd(0) nanoparticles on the surface were evaluated by catalytic activity, yield, and recyclability in the Heck reaction, in addition to the deposit test.     

High-pressure synthesis of cyclic phenylacetylene oligomer

New conjugated oligomers were prepared by reacting phenylacetylene under high pressure of 0.11 to 0.92 GPa at 100–200°C for 0–5 h. The number-average molecular weight M?_n, the weight-average molecular weight M?_w, and the oligomer yield increased with pressure, tem-perature, and time. The average molecular weight of the oligomer showed the maximum value (M?_n: 830, M?_w: 2400) under 0.92 GPa, the maximum pressure, where phenylacetylene was oligomerized at a constant temperature. The structure of the oligomer was investigated from ESR, infrared, UV–VIS, field desorption mass (FDMS) spectra, and ¹³C NMR spec-trum. Analysis of the FDMS spectrum revealed that the molecular weight of the oligomer was multiple of the monomer. ¹³C NMR spectrum of the oligomer showed the absence of sp-carbon (? C?). We found that the oligomer had a cyclic structure. The cyclic oligomers of pentamer or more were new compounds. © 1995 John Wiley & Sons, Inc.     

Photocatalytic oxidation of 2-propanol under visible light irradiation on TiO<Subscript>2</Subscript> thin films prepared by an RF magnetron sputtering deposition method

Visible light-responsive TiO₂ (Vis-TiO₂) thin films able to absorb UV and visible light in wavelength regions of 250–600 nm were successfully developed by applying a radio-frequency magnetron sputtering deposition method. These Vis-TiO₂ thin films exhibited high activity for the photocatalytic oxidation of 2-propanol diluted in water even under visible light irradiation (λ ≥ 450 nm). The photocatalytic activity of Vis-TiO₂ thin films was dramatically enhanced by the deposition of Pt particles on the surface. Secondary ion mass spectrometry measurements revealed that Pt particles are distributed from the top surface to the deep bulk of Vis-TiO₂ thin films with a columnar structure. The unique columnar structure of Vis-TiO₂ thin films plays an important role in the high photocatalytic performance.     

Synthesis, characterization, and reactivity of a novel μ-η2:η2-diselenidodicopper(II) complex

The first μ-η(2):η(2)-diselenidodicopper(II) complex has been obtained in the reaction of a copper(I) complex with N,N',N″-tribenzyl-cis,cis-1,3,5-triaminocyclohexane and elemental selenium. The structure and reactivity of the complex is described.     

Fluorescence response of 3-trifluoroacetylaminophthalimide to a Li(+)-I(-) ion pair induced by 254 nm photolysis in acetonitrile

A 3-trifluoroacetylaminophthalimide selectively distinguished LiI from other alkaline-metal iodides and lithium halides by a marked fluorescence colour change, from orange-yellow to sky-blue, subsequent to 254 nm photolysis.     

Effect of the cooling rate on dimerization of C60(•-) in fullerene salt (DMI+)2·(C60(•-))·{Cd(Et2NCS2)2I-}

The salt (DMI(+))(2)·(C(60)(?-))·{Cd(Et(2)NCS(2))(2)I(-)} (1) containing fullerene radical anions, the anions of cadmium diethyldithiocarbamate iodide, and N,N'-dimethylimidazolium cations was obtained. Fullerenes are monomeric in 1 at 250 K and form three-dimensional packing in which each fullerene has nearly tetrahedral surroundings from neighboring fullerenes. Fullerenes with a shorter interfullerene center-to-center distance of 10.031(2) ? form spiral chains arranged along the lattice c axis. The convolution consists of four fullerene molecules. Dimerization realized in 1 within the spiral chains below 135 K manifests a strong dependence on the cooling rate. The "frozen" monomeric phase was obtained upon instant quenching of 1. This phase is stable below 95 K for a long time but slowly converted to the dimeric phase at T > 95 K. It exhibits a weak antiferromagnetic interaction of spins below 95 K (the Weiss temperature is -4 K), which results in the splitting of the electron paramagnetic resonance (EPR) signal into two components below 10 K. A disordered phase containing both C(60)(?-) monomers and singly bonded (C(60)(-))(2) dimers with approximately 0.5/0.5 occupancies is formed at an intermediate cooling rate (for 20 min). The position of each fullerene in this phase is split into three positions slightly shifted relative to each other. The central position corresponds to nonbonded fullerenes with interfullerene center-to-center distances of 9.94-10.00 ?. Two other positions are coincided to dimeric fullerenes formed with the right and left fullerene neighbors within the spiral chain. This intermediate phase is paramagnetic with nearly zero Weiss temperature due to isolation of C(60)(?-) by diamagnetic species and exhibits a strongly asymmetric EPR signal below 20 K. A diamagnetic phase containing ordered singly bonded (C(60)(-))(2) dimers can be obtained only upon slow cooling of the crystal for 6 h.     

Blockade of inflammatory responses by a small-molecule inhibitor of the Rac activator DOCK2

1. Download : Download high-res image (273KB)
2. Download : Download full-size image

Highlights? CPYPP binds to DOCK2 DHR-2 domain and inhibits its catalytic activity ? CPYPP inhibits DOCK2-mediated Rac activation in cells ? The structural features of CPYPP required for its inhibitory effect were revealed ? CPYPP inhibits lymphocyte migration and activation in vitro and in vivo     

Efficient eosin y dye-sensitized solar cell containing Br-/Br3- electrolyte

We found that Br-/Br3- is more suitable than an I-/I3- couple in dye-sensitized solar cells in terms of higher open-circuit photovoltage (Voc) production and higher overall energy conversion efficiency (eta) if the dye sensitizer has a more positive potential than that of Br-/Br3-. Under simulated AM1.5 one sun, an eosin Y dye-sensitized solar cell containing 0.4 M LiBr + 0.04 M Br2 electrolyte in acetonitrile yielded a short-circuit photocurrent (Jsc) of 4.63 mA cm(-2), Voc of 0.813 V, and fill factor (FF) of 0.693, corresponding to 2.61% of eta. Under the same conditions except for the electrolyte 0.4 M LiI + 0.04 M I2 in acetonitrile instead, the device produced 1.67% of eta (Jsc = 5.15 mA cm(-2), Voc = 0.451 V, FF = 0.721). Replacement of I-/I3- with Br-/Br3- in eosin Y dye-sensitized solar cells yielded a significant increase in Voc offset by slight decreases in Jsc and FF, leading to an increase in eta by 56%. The significant gain in Voc was attributed to the enlarged energy level difference between the redox potential of the electrolyte and the Fermi level of TiO2 and the suppressed charge recombination as well. The rate for charge recombination between bromine and the injected electrons was determined to be first order in bromine.     

Photophysical and (photo)electrochemical properties of a coumarin dye

A new coumarin dye, cyano-{5,5-dimethyl-3-[2-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)vinyl]cyclohex-2-enylidene}-acetic acid (NKX-2753), was prepared and characterized with respect to photophysical and electrochemical properties. It was employed as a dye sensitizer in dye-sensitized solar cells and showed efficient photon-to-electron conversion properties. The photocurrent action spectrum exhibited a broad feature with a maximum incident photon-to-electron conversion efficiency (IPCE) of 84% at 540 nm, which is comparable to that for the famous red dye RuL2(NCS)2 (known as N3), where L stands for 2,2'-bipyridyl-4,4'-dicarboxylic acid. The sandwich-type solar cell with NKX-2753, under illumination of full sun (AM1.5, 100 mW cm(-2)), produced 16.1 mA cm(-2) of short-circuit photocurrent, 0.60 V of open-circuit photovoltage, and 0.69 of fill factor, corresponding to 6.7% of overall energy conversion efficiency using 0.1 M LiI, 0.05 M I2, 0.1 M guanidinium thiocyanate, and 0.6 M 1,2-dimethyl-3-n-propyl-imidazolium iodide in dry acetonitrile as redox electrolyte. In comparison with its analogue NKX-2586 (Langmuir 2004, 20, 4205), NKX-2753 with an extra side ring on the alkene chain produced much higher IPCE values at the same conditions. The side ring acted as a spacer to efficiently prevent dye aggregation when adsorbed on the TiO2 surface, resulting in significant improvements of short-circuit photocurrent, open-circuit photovoltage, and fill factor compared with NKX-2586 that aggregated on the TiO2 surface.