Control on the porosity of disk-like hematite particles prepared from a forced hydrolysis reaction using polyvinyl alcohol

The effects of polyvinyl alcohol (PVA) molecules on the porosity of disk-like hematite particles produced from the forced hydrolysis reaction using two kinds of PVA molecules with a well-defined molecular weight and a high degree of saponification (PVA-105 and PVA-124) were investigated. It is evident from TEM and field-emission scanning electron microscope (FE-SEM) measurements that a fraction of particles lost their spherical habit and acquired a disk-like shape by the addition of small amounts of both PVA molecules, though no difference in the particle size between the two PVA systems was observed. FE-SEM images of the particles revealed that the disk-like hematite particles are made up of small cluster particles with a diameter of approx. 5–10 nm. The disk-like particles produced a rather lower concentration for PVA-124 with a higher molecular weight than that for PVA-105 with a lower molecular weight. This fact was due to the large number of hydroxy groups in PVA-124 molecules than in PVA-105; hydroxy groups act as adsorption sites onto polynuclear (PN) primary particles and cause pronounced effects on the formation and structure of particles during the aggregation of PN particles. It was clarified from N₂ adsorption measurements at 77 K that the porosity of the hematite particles can be controlled from microporous to mesoporous by changing the concentrations of PVA-105 and PVA-124, as was classified into three groups, i.e., groups 1, 2, and 3. The control particles produced without PVA molecules, classified into group 1, showed type IV adsorption isotherms, and only the voids produced between spherical particles were detected as mesopores. On the other hand, the particles produced with small amounts of PVA produced micropores as classified in group 2. In this group, the particles produced uniform micropores after being outgassed at 100–200 °C. The hematite particles produced with high concentrations of PVAs were classified into group 3. In this group, the particles after being outgassed at lower temperature produced micropores with diameters between 0.6 and 2.0 nm, though the micropores in the particles changed to mesopores after outgassing at 300 °C. This mesopore formation was attributed to the elimination of the PVA-adsorbed layer by evacuation at 300 °C, i.e., the large voids residing in the disk-like hematite particles make the particles mesoporous. This mesopore formation was further confirmed by adsorption experiments of C₆H₆(benzene) and CCl₄ molecules at 298 K.     

Synthetic Studies on Sialoglycoconjugates 60: α-Stereocontrolled,Glycoside Synthesis of Trimeric Sialic Acid with Galactose and Lactose Derivatives

Abstract

α-Stereocontrolled, glycoside synthesis of trimeric sialic acid is described toward a systematic approach to the synthesis of sialoglycoconjugates containing an α-sialyl-(2→8)-α-sialyl-(2→8)-sialic acid unit α-glycosidically linked to O-3 of a galactose residue in their oligosaccharide chains. Glycosylation of 2-(trimethylsilyl)ethyl 6-O-benzoyl-β-d-galactopyranoside (4) or 2-(trimethylsilyl)ethyl 2,3,6,2′,6′-penta-O-benzyl-β-lactoside (5), with methyl [phenyl 5-acetamido-8-O-[5-acetamido-8-O-(5-acetamido-4,7,8,9-tetra-O-acetyl-3,5-dideoxy-d-glycero-α-d-galacto-2-nonulopyranosylono-1”, 9′-lactone)-4,7-di-O-acetyl-3,5-dideoxy-d-glycero-α-d-galacto-2-nonulopyranosylono-1′, 9-lactone]-4,7-di-O-acetyl-3,5-dideoxy-2-thio-d-glycero-d-galacto-2-nonulopyranosid]onate (3), using N-iodosuccinimide-trifluoromethanesulfonic acid as a promoter, gave the corresponding α-glycosides 6 and 8, respectively. The glycosyl donor 3 was prepared from trimeric sialic acid by treatment with Amberlite IR-120 (H⁺) resin in methanol, O-acetylation, and subsequent replacement of the anomeric acetoxy group with phenylthio. Compounds 6 and 8 were converted into the per-O-acyl derivatives 7 and 9, respectively.     

Studies on 1-Deoxynojirimycin-Containing Glycans: Synthesis of Novel Disaccharides Related to Lactose,Lactosamine, and Chitobiose

Abstract

Suitably protected 1-deoxynojirimycin (l, 5-dideoxy-l, 5-imino-D-glucitol; DNJ) and its 2-acetamido derivative, i.e., 2, 3, 6-tri-O-benzyl-.N-benzyloxycarbonyl-l, 5-dideoxy-1, 5-imino-D-glucitol (6) and 2-acetamido-3, 6-di-O-benzyl-N-benzyloxycarbonyl-1, 2, 5-trideoxy-l, 5-imino-D-glucitol (14) were each coupled with methyl 2, 3, 4, 6-tetra-O-acetyl-1-thio-β-D-galactopyranoside (15) in the presence of dimethyl(methylthio)-sulfonium triflate (DMTST) as a promoter, to give 16 and 18, which were converted to the novel disaccharides (20, 21) related to lactose and lactosamine. Coupling of 14with methyl 3, 4, 6-tri-O-acetyl-2-deoxy-2-phthalimido-l-thio-β-D-glucopyranoside (22) gave achitobiose analog (25). O-(β-D-Galactopyranosyl)-(l→3)-DNJ derivatives (38, 39) and O-(β-D-glucopyranosyl)-(l→3)-DNJ (45) were also synthesized. Conformational analysis of a variety of DNJ derivatives, based on the ¹H NMR data, is also discussed.     

Laser-diode pumped heavy-doped Yb:YAG ceramic lasers

Laser performance of heavy-doped Yb:YAG ceramics was investigated using a two-pass pumping miniature laser configuration. Slope efficiency of 52% and optical-to-optical efficiency of 48% have been achieved for 1-mm-thick YAG ceramic doped with 20 at.% ytterbium ions. Laser spectra of Yb:YAG ceramic and single-crystal lasers were addressed under different intracavity laser intensities. Heavy-doped Yb:YAG ceramic is more suitable for a thin disk laser than a single-crystal with the same Yb(3+)-ion lasants.     

Catalytic Activity of Molecular Rhenium Sulfide Clusters [Re6S8(OH)6−n (H2O) n ](4−n)− (n = 0, 2, 4, 6) with Retention of the Octahedral Metal Frameworks: Dehydrogenation and Dehydration of 1,4-Butanediol

A series of molecular rhenium sulfide clusters [Re₆S₈(OH)_6?n (H₂O) _n ]^(4?n)? (n = 0, 2, 4, 6) catalyze dehydrogenation of alcohols, and hydrogenation of ketones and olefins in a hydrogen stream at 350 °C. The catalytic activities of the dianionic and neutral clusters (n = 2, 4) are lower than those of tetraanionic and dicationic clusters (n = 0, 6) for all the reactions. When 1,4-butanediol is allowed to react over K₄[Re₆S₈(OH)₆], dehydrogenation proceeds to yield 2-hydroxytetrahydrofuran and successively γ-butyrolactone above 300 °C. Over [Re₆S₈(H₂O)₆]SO₄ dehydration proceeds to yield tetrahydrofuran above 250 °C. The thermal activation mechanisms of these clusters were studied by powder X-ray diffraction analyses, Raman spectrometry, extended X-ray absorption fine structure spectrometry, thermogravimetry, and differential thermal analyses. The catalytically active site of K₄[Re₆S₈(OH)₆] is an uncoordinated metal site (Lewis acid site) developed by the loss of a water molecule from two hydroxo ligands. The active site of [Re₆S₈(H₂O)₆]SO₄ is a Brønsted acid site; the anhydrous aqua cluster dication disproportionates to a hydroxo cluster monocation and a proton. Both of the octahedral cluster frameworks are retained up to 500 °C.     

Direct Asymmetric Mannich‐Type Reaction of α‐Isocyanoacetates with Ketimines using Cinchona Alkaloid/Copper(II) Catalysts

The enantioselective direct Mannich‐type reaction of ketimines with α‐isocyanoacetates has been developed. Excellent yields and enantioselectivity were observed for the reaction of various ketimines and α‐isocyanoacetates using cinchona alkaloid/Cu(OTf)₂ and a base. Both enantiomers of the products could be obtained by using pseudoenantiomeric chiral catalysts. This process offers an efficient route for the synthesis of α,β‐diamino acids.     

pH-responsive non-surface-active/surface-active transition of weakly ionic amphiphilic diblock copolymers

The weakly ionic amphiphilic diblock copolymer polystyrene-b-poly(acrylic acid) was synthesized by nitroxy radical-mediated living radical polymerization with precise control of block length, block ratio, and polydispersity. Systematical surface tension experiments and foam formation observations revealed that this polymer was non-surface active under neutral and alkaline (pH 10) conditions, while it was surface active under an acidic condition (pH 3). This result supports our proposed origin of non-surface activity; the image charge repulsion at the air/water interface is essential in addition to very stable micelle formation in the bulk solution. At a higher pH (pH 12), the polymer showed slight surface activity since the added NaOH played a role as an added salt. The critical micelle concentration (cmc) was estimated by static light scattering. Cmc increased with increasing added salt (NaCl) concentration as was observed for other strongly ionic non-surface-active polymers. Hence, this trend is characteristic for non-surface-active polymers. The pH dependence of cmc was minimum at pH 8–10. Since the acrylic acid block is fully ionized under this condition, the strong image charge repulsion at this condition accelerated micelle formation at a low polymer concentration, which consequently decreased cmc. Micelles in bulk solution were confirmed by dynamic light scattering, and the salt concentration and pH dependencies of the hydrodynamic radius of the micelles were also estimated. The pH-responsive non-surface-active/surface-active transition observed in this study strongly supports the fact that the image charge repulsion is an essential factor for non-surface activity in addition to stable micelle formation in solution.     

Selective decomposition of proteins by photocatalytic Ti(IV)-doped calcium hydroxyapatite particles from mixed-protein systems

The decomposition of protein molecules from a mixed-protein solution on the surface of calcium hydroxyapatite (CaHap) and Ti(IV)-doped CaHap (TiHap) particles with a Ti/(Ca + Ti) atomic ratio (X _Ti) of 0.10 and 0.20 under UV irradiation of 365 nm in wavelength was investigated. Acidic bovine serum albumin (BSA) and basic lysozyme (LSZ) were employed as a model of pathogenic proteins. The photocatalytic activities of TiHap particles were estimated from the decomposition of BSA and LSZ from the BSA (2.5 mg/cm³)–LSZ(1.0 mg/cm³) mixture under 1 mW/cm² UV irradiation dispersed in a 10-mL quartz tube. No change in BSA concentration by UV irradiation was observed for all the unheated original CaHap and TiHap particles without and with low photocatalytic activities, respectively. Similar results were observed for the systems that employed heat-treated particles endowed a high photocatalytic activity by heat treatment at 650 °C for 1 h. On the other hand, a selective photocatalytic decomposition was observed for the LSZ, i.e., only LSZ molecules were decomposed completely from the BSA (2.5 mg/cm³)–LSZ(1.0 mg/cm³) mixture by using heat-treated TiHap particles with X _Ti?=?0.10 and 0.20. This selective decomposition by TiHap particles was interpreted by higher adsorption affinity of positively charged LSZ to highly negatively charged TiHap together with low molecular weight and rigid structure of LSZ molecules.     

Electrochemical Sensing of Ovalbumin Based on the Interaction between Lysozyme Origin/Tyrosine‐rich Peptides Modified on Magnetic Beads and Oligothreonine/Ovalbumin‐origin Peptide

We developed a highly sensitive electrochemical system for the sensing of ovalbumin (OVA). Lysozyme origin/tyrosine‐rich peptides (RNRCKGTDVQAWY₄C) were immobilized on magnetic beads, and the competitive reaction between OVA and oligothreonine/OVA origin peptide probe (T₈VLLPDEVSG) could then be measured. In a previous study, the detection of OVA at the 10^?13 M level was achieved using RNRCKGTDVQAWY₄C‐modified beads via a cross‐linker. To improve the sensitivity to OVA, this system uses T₈VLLPDEVSG peptide probe to measure the interaction to RNRCKGTDVQAWY₄C immobilized on magnetic beads. The peak of Y₄C actually was an electron‐transfer peptide, which represented the oxidation of a phenolic hydroxyl group. First, we confirmed that the oxidation response of Y₄C was increased based on an improvement in the electron transfer accessibility by oligothreonine. Next, T₈VLLPDEVSG peptide probe was used for the electrochemical sensing of OVA in solutions that contained consistent amounts of RNRCKGTDVQAWY₄C on magnetic beads. As a result, the peak current decreased as the concentration of OVA increased. The sensitivity to OVA was improved compared with the use of only RNRCKGTDVQAWY₄C on magnetic beads. The OVA detection level was 10^?14 M, which approximates the results from antibody‐antigen reactions. Consequently, the proposed system is a powerful new concept in protein sensing.