Directing/Protecting‐Group‐Free Synthesis of Tetraaryl‐Substituted Pyrazoles through Four Direct Arylations on an Unsubstituted Pyrazole Scaffold

A directing/protecting‐group‐free synthesis of 1,3,4,5‐tetraaryl‐substituted pyrazoles was achieved through four transition metal‐catalyzed direct arylations. Various pyrazoles with four different aryl rings were obtained using readily available reagents from an unsubstituted pyrazole. Two aryl‐substituted pyrazoles showed intense violet fluorescence, high quantum yields (Φ_f=0.68, 0.64), and large Stokes shifts (19000, 15200 cm^?1).     

Quantum yields and quantitative spectra of firefly bioluminescence with various bivalent metal ions

We measured quantitative spectra of firefly (Photinus pyralis) bioluminescence in the presence of Zn²⁺ and other bivalent metal ions to investigate the effects of these metal ions on luciferin‐luciferase reaction. We studied the dependence of the quantum yield and spectrum on quantity and kind of bivalent metal ions. Adding various amounts of Mg²⁺, Mn²⁺ and Ca²⁺ produced virtually no change in the quantum yields or the spectra of bioluminescence. In contrast, increasing amounts of ions such as Zn²⁺ and Cd²⁺ decreased quantum yields and changed the bioluminescence color from yellow‐green to red. Quantitative analysis showed that the sensitivities of the quantum yield and color to various metal ions were in the order of Hg²⁺>Zn²⁺, Cd²⁺>Ni²⁺, Co²⁺, Fe²⁺≫Mg²⁺, Mn²⁺, Ca²⁺. We propose that the changes in quantum yield and spectrum caused by the metal ions are due to their effect on luciferase that surrounds oxyluciferin during its radioactive decay. We also found that having more metal ions accelerated bioluminescence reactions. The sensitivity of the reaction rate had no correlation with those of the quantum yield and spectrum.     

Enantioenriched synthesis of cyclopropenes with a quaternary stereocenter, versatile building blocks

Ir(salen) complexes were found to catalyze enantioselective cyclopropenation efficiently. Cyclopropenation can be carried out using either a donor/acceptor- or an acceptor/acceptor-substituted diazo compound such as α-aryl-α-diazoacetates, α-phenyl-α-diazophosphonate, 2,2,2-trifluoro-1-phenyl-1-diazoethane, and α-cyano-α-diazoacetamide as carbenoid precursors. The reactions provide highly enantioenriched cyclopropenes (84-98% ee) with a functionalized quaternary carbon as versatile building blocks.     

Spectrometric analysis of nitrogen in steel with D.C. arc in the vacuum ultraviolet

Summary A spectrometric determination of nitrogen in steel was performed with d.c. arc excitation in the vacuum ultraviolet region. Two nitrogen spectral lines, 1,742 Å and 1,745 Å, were utilized for the determination of nitrogen using C I 1,930 Å as internal standard in the wave-length region of 1,200–2,000 Å. In argon atmosphere (700 mm Hg, 28 A arc current) and in helium atmosphere (700 mm Hg, 30 A arc current) nitrogen could be determined below 50 ppm after a pre-arcing time of 100 sec. Better reproducibility could be obtained with the line 1,745 Å rather than with 1,742 Å.

---

Zusammenfassung Zur Bestimmung von Stickstoff in Stählen wird eine UV-vakuumspektrometrische Methode mit Gleichstrom-Bogenentladung empfohlen. Zur Anwendung kommen die Stickstofflinien 1742 Å und 1745 Å mit der inneren Standardlinie C I 1930 Å. Unter Argon- (700 mm Hg; 28 A Bogenstrom) oder unter Heliumatmosphäre (700 mm Hg; 30 A Bogenstrom) konnten Stickstoffmengen unter 50 ppm nach einer Vorentladungszeit von 100 sec bestimmt werden. Die Linie 1745 Å ergab eine bessere Reproduzierbarkeit als 1742 Å.

     

Synthesis,Structures, and Properties of Highly Strained Cyclophenylene–Ethynylenes with Axial and Helical Chirality

Single and double cyclophenylene–ethynylenes (CPEs) with axial and helical chirality have been synthesized by the Sonogashira cross-coupling of di- and tetraethynyl biphenyls with a U-shaped prearomatic diiodoparaphenylene followed by reductive aromatization. X-ray crystallographic analyses and DFT calculations revealed that the CPEs possess highly twisted bent structures. Bend angles on the edge of the paraphenylene units were close to the value of [5]cycloparaphenylene (CPP)—the smallest CPP to date. The double and single CPEs possessed stable chirality despite flexible biphenyl structures because of the high strain in the diethynyl–paraphenylene moiety. In both the single and double CPEs, orbital interactions along the biphenyl axis were observed by DFT calculations in LUMO and LUMO+2 of the single CPE and LUMO+1 of the double CPE, which likely cause lowering of these orbital energies. Concerning chiroptical properties: boosting of the g_abs value was observed in the biphenyl-based double CPE, as well as the binaphthyl-based single CPE, compared to the biphenyl-based single CPE.     

Enantioselective Synthesis of Polycyclic Aromatic Hydrocarbon (PAH)-Based Planar Chiral Bent Cyclophanes by Rhodium-Catalyzed [2+2+2] Cycloaddition

The enantioselective synthesis of polycyclic aromatic hydrocarbon (PAH)-based planar chiral cyclophanes was achieved for the first time by the rhodium-catalyzed intramolecular regio- and enantioselective [2+2+2] cycloaddition of tethered diyne-benzofulvenes followed by stepwise oxidative transformations. The thus synthesized planar chiral bent cyclophanes, that possess bent p-terphenyl- and 9-fluorenone-cores, were converted to 9-fluorenol-based ones with excellent ee values of >99 % by diastereoselective 1,2-reduction. These 9-fluorenol-based cyclophanes exhibited high fluorescence quantum yields, which were significantly higher than that of an acyclic reference molecule (78–82 % vs. 48 %). The bending effect on the chiroptical property was also examined, which revealed that the anisotropy factors (g_abs values) for electronic circular dichroism (ECD) of these 9-fluorenol-based planar chiral bent cyclophanes increase as the tether length becomes shorter.     

On-site manipulation of single chromosomal DNA molecules by using optically driven microstructures

We report a novel method for manipulation of single giant DNA molecules under a video microscope. Using optically driven microstructures, we manipulated chromosomal DNA of length in the order of millimetres, extended by electroosmotic flow without DNA breakage in aqueous solution: we picked up DNA, using microfabricated hooks and wound it around microfabricated bobbins.     

Stir bar sorptive extraction and thermal desorption-gas chromatography-mass spectrometry for trace analysis of triclosan in water sample

A simple and highly sensitive method called stir bar sorptive extraction (SBSE) and thermal desorption (TD)-gas chromatography-mass spectrometry (GC-MS), which is used for the determination of trace amounts of 5-chloro-2-(2,4-dichlorophenoxy)phenol (triclosan) in river water samples, is described. A stir bar coated with polydimethylsiloxane (PDMS) is added to a 10mL water sample and stirring is carried out for 120min at room temperature (25 degrees C) in a vial. Then, the PDMS stir bar is subjected to TD-GC-MS. The detection limit of triclosan is 5ngL(-1) (ppt). The method shows linearity over the calibration range (0.02-20mugL(-1)) and the correlation coefficient is higher than 0.997 for triclosan standard solution. The recovery of triclosan in river water samples ranges from 91.9 to 108.3% (RSD: 4.0-7.0%). This simple, accurate, sensitive, and selective analytical method may be used in the determination of trace amounts of triclosan in river water samples.     

Mercury speciation and analysis in drinking water by stir bar sorptive extraction with in situ propyl derivatization and thermal desorption-gas chromatography-mass spectrometry

A method for mercury analysis and speciation in drinking water was developed, which involved stir bar sorptive extraction (SBSE) with in situ propyl derivatization and thermal desorption (TD)-GC-MS. Ten millilitre of tap water or bottled water was used. After a stir bar, pH adjustment agent and derivatization reagent were added, SBSE was performed. Then, the stir bar was subjected to TD-GC-MS. The detection limits were 0.01 ng mL(-1) (ethylmercury; EtHg), 0.02 ng mL(-1) (methylmercury; MeHg), and 0.2 ng mL(-1) (Hg(II) and diethylmercury (DiEtHg)). The method showed good linearity and correlation coefficients. The average recoveries of mercury species (n=5) in water samples spiked with 0.5, 2.0, and 6.0 ng mL(-1) mercury species were 93.1-131.1% (RSD<11.5%), 90.1-106.4% (RSD<7.8%), and 94.2-109.6% (RSD<8.8%), respectively. The method enables the precise determination of standards and can be applied to the determination of mercury species in water samples.