Singlet Oxygen–mediated Hydroxyl Radical Production in the Presence of Phenols: Whether DMPO–·OH Formation Really Indicates Production of ·OH?¶

The reaction of singlet oxygen (1O2) generated by ultraviolet-A (UVA)-visible light (lambda > 330 nm) irradiation of air-saturated solutions of hematoporphyrin with phenolic compounds in the presence of a spin trap, 5,5-dimethyl-1-pyrroline-N-oxide (DMPO), gave an electron spin resonance (ESR) spectrum characteristic of the DMPO-hydroxyl radical spin adduct (DMPO-*OH). In contrast, the ESR signal of 5,5-dimethyl-2-pyrrolidone-N-oxyl, an oxidative product of DMPO, was observed in the absence of phenolic compounds. The ESR signal of DMPO-*OH decreased in the presence of either a *OH scavenger or a quencher of *O2 and under anaerobic conditions, whereas it increased depending on the concentration of DMPO. These results indicate both 1O2- and DMPO-mediated formation of free *OH during the reaction. When DMPO was replaced with 5-(diethoxyphosphoryl)-5-methyl-1-pyrroline-N-oxide (DEPMPO), no DEPMPO adduct of oxygen radical species was obtained. This suggests that 1O2, as an oxidizing agent, reacts little with DEPMPO, in which a strong electron-withdrawing phosphoryl group increases the oxidation potential of DEPMPO compared with DMPO. A linear correlation between the amounts of DMPO-*OH generated and the oxidation potentials of phenolic compounds was observed, suggesting that the electron-donating properties of phenolic compounds contribute to the appearance of *OH. These observations indicate that 1O2 reacts first with DMPO, and the resulting DMPO-1O2 intermediate is immediately decomposed/reduced to give *OH. Phenolic compounds would participate in this reaction as electron donors but would not contribute to the direct conversion of 1O2 to *OH. Furthermore, DEPMPO did not cause the spin-trapping agent-mediated generation of *OH like DMPO did.     

Trifluoromethyl‐Radical‐Mediated Carbonylation of Alkanes Leading to Ethynyl Ketones

The carbonylation of alkanes 1 under radical‐reaction conditions was examined by using ethynyl triflone A as the unimolecular chain‐transfer (UMCT) reagent. Good to moderate yields of ethynyl ketones 2 were prepared by means of this three‐component coupling reaction. Higher CO pressures as well as lower concentrations of triflone A improved the efficiency of the reaction over the direct addition, the latter leading to alkylated ethynes 3 . In contrast to the reaction with A , the reaction of cyclohexane ( 1a ) with allyl triflone B (= ethyl 2‐methylene‐3‐[(trifluoromethyl)sulfonyl]propanoate) in the presence of CO gave a mixture of carbonylation products, including 8a formed from two molecules each of cyclohexane, CO, and allyl triflone B .     

Total synthesis of cis-solamin and its inhibitory action with bovine heart mitochondrial complex I

A convergent total synthesis of cis-solamin (1a) and its diastereomer (1b) was accomplished. A key reaction of this approach was the use of VO(acac)₂-catalyzed diastereoselective epoxidation of (Z)-bis-homoallylic alcohol 3 followed by spontaneous cyclization for the cis-THF ring formation. By comparison of the optical rotation of the two possible diastereomers, it is suggested that the absolute configuration of natural cis-solamin is 1a. Inhibitory action of synthetic 1a and 1b with bovine heart mitochondrial complex I are reported.     

Thermally-induced radical rearrangement of 2-(2-thienylmethoxy)-and 2-(2-benzo[b]thienylmethoxy)tropones

Upon heating at ca. 160°, 2-(2-thienylmethoxy)tropone afforded 3- and 5(2-thienylmethyl)tropolones. Formation of 3,5-bis(2-thienylmethyl)tropolone and unsubstituted tropolone indicated a radical chain mechanism for the thermolysis.     

Total synthesis of cis-solamin

[structure: see text] A convergent total synthesis of cis-solamin and its diastereomer was accomplished using VO(acac)2-catalyzed diastereoselective epoxidation followed by cyclization of bis-homoallylic alcohol as the key step. By comparison of the optical rotation of two possible diastereomers, it is suggested that the absolute configuration of natural cis-solamin is 1a.     

Polymerization of coordinated monomers VII. A kinetic study on the alternating copolymerization of methyl methacrylate with styrene using stannic chloride

The alternating copolymerization of methyl methacrylate with styrene in the presence of stannic chloride at ?50°C in toluene was kinetically investigated both under photoirradiation and with the tri-n-butylboron-benzoyl peroxide initiator. The concentrations of the binary and ternary molecular complexes in the copolymerization solution were estimated by use of the equilibrium constants. The rates are found to be proportional to the 1.5th and 1.0th orders of the concentration of the ternary molecular complex composed of stannic chloride, methyl methacrylate, and styrene, under photoirradiation and with initiator, respectively. The conversion increases proportionally with the polymerization time, while the degree of polymerization is constant irrespective of the time. The rates depend linearly upon the square root of the intensity of the incident light and upon the concentration of tri-n-butylboron, respectively. The alternating copolymerization is confirmed experimentally to precede the homopolymerization of the monomer charged in large excess both under photoirradiation and with initiator. The kinetic results indicate consistently that the alternating copolymerization proceeds through the homopolymerization of the ternary molecular complex in the steady state with a bimolecular termination. Both the conventional radical mechanism and the double complex mechanism are unsuitable for the present alternating copolymerization.     

Polymerization of coordinated monomers. III. Copolymerization of acrylonitrile–zinc chloride,methacrylonitrile–zinc chloride or methyl methacrylate–zinc chloride complex with styrene

The 1:1 or 2:1 complex of acrylonitrile, methacrylonitrile, or methyl methacrylate with ZnCl₂ was copolymerized with styrene at the temperature of 0–30°C without any initiator. The structure of the copolymer from methyl methacrylate complex and styrene was examined by NMR spectroscopy. The complexes of acrylonitrile or methacrylonitrile with ZnCl₂ gave a copolymer containing about 50 mole-% styrene units. The complexes of methyl methacrylate yielded an alternating copolymer when the feed molar ratio of methyl methacrylate to styrene was small, but with increasing feed molar ratio the resulting copolymer consisted of about 2 moles of methyl methacrylate per mole of styrene. The formation of a charge-transfer complex of styrene with a monomer coordinated to zinc atom was inferred from the ultraviolet spectra. The regulation of the copolymerization was considered to be effected by the charge-transfer complex. The copolymer resulting from the 2:1 methyl methacrylate–zinc chloride complex had no specific tacticity, whereas the copolymer from the 1:1 complex was richer in coisotacticity than in cosyndiotacticity. The change of the composition of the copolymer and its specific tacticity in the polymerization of the methyl methacrylate complex is related to the structure of the complex.     

Novel rearrangement of twisted 2,4-di-alkyl 2-trans-4-trans pentadienals: An approach to cyclopentenones based on molecular mechanical consideration

Rearrangement of 2,4-di-$\text{trans}$-pentadienals $\text{IVa-d}$ was described as a consequence of the successive alkyl substitutions on the C-2 and C-4 positions. ¹H-FT nmr spectroscopy suggested that the reaction involves ketene $\text{VIII}$ as an intermediate.     

Hydrides with the perovskite structure: General bonding and stability considerations and the new representative CaNiH3

The stability and electronic structure of perovskite hydrides ABH₃ were investigated by means of first-principles density functional calculations. Two types of perovskite hydrides are distinguished: (1) When A and B are alkali and alkaline earth metals, the hydrides are ionic compounds with calculated band gaps of around 2 eV and higher. Their stability trend follows basically the concept of Goldschmidt's tolerance factor. (2) When A is one of the heavier alkaline earth metals (Ca, Sr, Ba) and B a transition metal, stable compounds ABH₃ result only when B is from the Fe, Co, or Ni groups. This stability trend is basically determined by effects associated with d band filling of both the transition metal and the hydride. In contrast to group (1) perovskites, the transition metal-containing compounds are metals. The synthesis of CaNiH₃ and its structure determination from CaNiD₃ is reported. This compound is a type (2) perovskite hydride with a fully occupied hydrogen position (CaNiD₃: a=3.551(4) Å, d_Ni-D=1.776(2) Å). Its stability is discussed with respect to transition metal hydrides with complex anions (e.g., Mg₂NiH₄, Na₂PdH₂, Sr₂PdH₄).     

Polymerization of coordinated monomers. XVI. Stereoregulation in the alternating copolymerization of methyl methacrylate with styrene in the presence of metal halides

Triad cotacticities of alternating copolymers of methyl methacrylate with styrene prepared in the presence of zinc chloride, ethylaluminium sesquichloride, and ethylboron dichloride are investigated from the mechanistic point of view by means of ¹H- and ¹³C-NMR. The cotacticities from ¹H-NMR spectra are obtained accurately by using α-d-styrene in the place of styrene and by measuring the spectra on the copolymer in o-dichlorobenzene at 170°C. The relative intensities of three peaks of the splitting signal for the methoxy protons in the nonalternating copolymers obtained by the use of benzoyl peroxide in the absence of metal halides agree well with the cotacticity distribution calculated theoretically by the Lewis-Mayo mechanism with the stereoregulation following Bernoullian statistics. The splitting signals in the ¹H- and ¹³C-NMR spectra of the alternating copolymers prepared in the presence of metal halides cannot be explained by the same mechanism. The relative intensities of three peaks of the splitting signals for the methoxy protons and for the carbonyl carbon in the methyl methacrylate unit (the contents of cotactic triads centered by the methyl methacrylate unit) are not equal to those for the aromatic C₁ carbon in the styrene unit (the contents of cotactic triads centered by styrene unit). The value of f²Y - 4fxfz is not equal to zero, where fx, fy, and fz are the cosyndiotactic, coheterotactic, and coisotactic triad contents, respectively, in the alternating copolymer. Copolymers obtained in the presence of zinc chloride are not exactly equimolar alternating but always contain a methyl methacrylate unit in excess, and the relative intensities of the three peaks for the aromatic C₁ carbon change with the copolymer composition. These results are explained by a proposed mechanism: the alternating copolymerization proceeds through the homopolymerization of a ternary molecular complex composed of a metal halide, methyl methacrylate, and styrene, accompanied with the stereoregulation following first-order Markovian statistics; the increase of methyl methacrylate content in the copolymer prepared in the presence of zinc chloride is caused by the participation of the binary molecular complex composed of a metal halide and methyl methacrylate in addition to the ternary molecular complex.