The unstable behavior of cellular premixed flames induced by intrinsic instability

The unstable behavior of cellular premixed flames induced by intrinsic instability is studied by two-dimensional unsteady calculations of reactive flows. In the present numerical simulation, the compressible Navier–Stokes equation including a one-step irreversible chemical reaction is employed. We consider two basic types of phenomena to account for the intrinsic instability of premixed flames, i.e., hydrodynamic and diffusive-thermal effects. The hydrodynamic effect is caused by the thermal expansion through the flame front; the diffusive-thermal effect is caused by the preferential diffusion of mass versus heat. A disturbance with several wavelength components is superimposed on a planar flame, and the formation of a cellular flame induced by hydrodynamic and diffusive-thermal effects is numerically simulated. After the cellular-flame formation, the combination and division of cells are observed. The behavior of cellular-flame fronts becomes more unstable when the Lewis number is lower than unity, since the diffusive-thermal effect has a great influence on the unstable behavior. The cell size changes with time, and its average is greater than the critical wavelength and becomes smaller by decreasing the Lewis number. The flame velocity of cellular flames depends strongly on the length of computational domain in the direction tangential to the flame front. As the length of computational domain increases, the flame velocity becomes larger. This is because the long-wavelength components of disturbances play an important role in the shape of cellular flames, i.e., in the flame-surface area.     

Results of 0.5% cold-leg small-break LOCA experiments at ROSA-IV/LSTF: Effect of break orientation

Three 0.5% cold-leg small-break loss-of-coolant accident (SBLOCA) experiment were conducted at the ROSA-IV Large Scale Test Facility (LSTF) to investigate the effects of break orientation on system thermal-hydraulic responses. In these three experiments, the break hole was located at the side, bottom, and top of the horizontal cold leg, respectively. Although the key phenomena observed in the three experiments were basically the same, the break flow rate was affected by the break orientation when phase stratification occured in the cold leg; the break flow rate was largest for the side break and smallest for the top break. The RELAP5/MOD2 code failed to predict the difference in the break flow rate observed in the experiments. Modification to the break flow calculation models, for both subcooled and two-phase flow discharge conditions, resulted in good agreement between data and predictions.     

Copolymerization of ethylene or propylene with α‐olefins containing hydroxyl groups with zirconocene/methylaluminoxane catalyst

Copolymerization of olefins (ethylene and propylene) and 5‐hexen‐1‐ol pretreated with alkylaluminum was performed using [dimethysilylbis(9‐fluorenyl)]zirconium dichloride/methylaluminoxane as the catalyst. The copolymerization required extra addition of alkylaluminum to prevent deactivation of the catalyst when 5‐hexen‐1‐ol was pretreated with trimethylaluminum, whereas the triisobutylaluminum‐treated system did not require any addition of alkylaluminum. The molecular weight of the copolymer depended on the kind of alkylaluminum compound (masking reagent, additive, and cocatalyst). ¹³C NMR analysis proved that poly(ethylene‐co‐5‐hexen‐1‐ol) containing 50 mol % of 5‐hexen‐1‐ol acted as an alternating copolymer, whereas the poly(propylene‐co‐5‐hexen‐1‐ol) acted as a random copolymer. The surface property of the copolymers was simply evaluated by means of water drop contact angle measurement. It was found that the copolymers containing large amounts of 5‐hexen‐1‐ol units showed good hydrophilic properties. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 52–58, 2004     

Structure and dynamics of ovalbumin gels

Solvent effects on dynamical and thermal behaviors of ovalbumin (OVA) gels induced by thermal denaturation at high temperature of 160°C were studied from dynamic shear modulus measurement, shear creep and creep recovery measurement, and DSC measurement. Two organic solvents, glycerin (G) and ethylene glycol (EG), and their mixtures with water (W)(G/W and EG/W) were used as solvent for preparation of gels. Stable gels formed in pure glycerin took a fractal structure at OVA concentration C range of 15–45wt% at a temperature specific to respective C, whereas a fractal structure was not observed for gels prepared in EG, G/W, and EG/W. The results were consistent with thermal denaturation behaviors of OVA in these solvents. Morphologies of two gels prepared in water and glycerin were explored using high resolution SEM, which showed that a basic unit responsible for formation of OVA gels was spheres with a diameter ranging from 20 to 40 nm, being much larger than 5.6 nm of the diameter of native OVA, and a fractal structure was related to network formation accompanied by melting of those spheres.Dedicated to Prof. John D. Ferry on the occasion of his 85th birthday.     

Crosstalk Suppression in Header Recognition Unit Using Time-Space Conversion

We demonstrate a suppression effect of a crosstalk among a target and similar header signals using the header recognition filter designed by a design technique of the multiple-object discriminant filter.     

An intense pulsed positron beam

A positron pulsing system for an intense positron beam generated by an electron linac is reported. The pulsing system generates an intense pulsed positron beam of variable energy and variable pulse period. The pulsed positron beam is used as a non-destructive probe for various material research. In this paper, we also discuss applications of the pulsed positron beam: positron lifetime spectroscopy, age-momentum correlation spectroscopy, positronium time-of-flight measurement, and positron annihilation-induced Auger electron spectroscopy with a time-of-flight technique.     

Symmetrization of Nonsymmetric Macdonald Polynomials and Macdonald's Inner Product Identities

We study the Macdonald polynomials that give eigenstates of some quantum many-body system with long-range interactions. Scalar products of the nonsymmetric Macdonald polynomials are algebraically evaluated through their Rodrigues-type formulas. We present a new proof of Macdonald's inner product identities without recourse to the shift operators; that is, we calculate square norms of the Macdonald polynomials through Weyl-symmetrization of those of the nonsymmetric Macdonald polynomials.     

Transport properties of a lateral semiconductor quantum dot defined by a single connected metallic front-gate

We present studies on the electric transport in a lateral GaAs/AlGaAs quantum dot defined by a patterned single connected metallic front-gate. This gate design allows to easily couple a large number of quantum dots and therefore holds high potential in the design of new materials with tailor-made band structures based on quantum dot superlattices of controlled shape. Clear Coulomb diamond structures and well pronounced tunneling peaks observed in experiment indicate that single-electron control has been achieved. However, the dependence on electron density in the heterostructure embedding the dot, which is controlled by an additional back-gate, reveals that transport characteristics are strongly influenced supposedly by potential fluctuations in the dot and lead regions.     

Reconstitution of Biosynthetic Machinery for the Synthesis of the Highly Elaborated Indole Diterpene Penitrem

Penitrem A is one of the most elaborated members of the fungal indole diterpenes. Two separate penitrem gene clusters were identified using genomic and RNA sequencing data, and 13 out of 17 transformations in the penitrem biosynthesis were elucidated by heterologous reconstitution of the relevant genes. These reactions involve 1) a prenylation‐initiated cationic cyclization to install the bicyclo[3.2.0]heptane skeleton (PtmE), 2) a two‐step P450‐catalyzed oxidative processes forming the unique tricyclic penitrem skeleton (PtmK and PtmU), and 3) five sequential oxidative transformations (PtmKULNJ). Importantly, without conventional gene disruption, reconstitution of the biosynthetic machinery provided sufficient data to determine the pathway. It was thus demonstrated that the Aspergillus oryzae reconstitution system is a powerful method for studying the biosynthesis of complex natural products.