Development of a wide range-operable,rich-lean low-NOx combustor for NH3 fuel gas-turbine power generation

Low-NOx NH₃-air combustion power generation technology was developed by using a 50-kWe class micro gas-turbine system at the National Institute of Advanced Industrial Science and Technology (AIST), Japan, for the first time. Based on the global demand for carbon-free power generation as well as recent advances involving gas-turbine technologies, such as heat-regenerative cycles, rapid fuel mixing using strong swirling flows, and two-stage combustion with equivalence ratio control, we developed a low-NOx NH₃-air non-premixed combustor for the gas-turbine system. Considering a previously performed numerical analysis, which proved that the NO reduction level depends on the equivalence ratio of the primary combustion zone in a NH₃-air swirl burner, an experimental study using a combustor test rig was carried out. Results showed that eliminating air flow through primary dilution holes moves the point of the lowest NO emissions to the lesser fuel flow rate. Based on findings derived by using a test rig, a rich-lean low NOx combustor was newly manufactured for actual gas-turbine operations. As a result, the NH₃ single fueled low-NOx combustion gas-turbine power generation using the rich-lean combustion concept succeeded over a wide range of power and rotational speeds, i.e., below 10–40 kWe and 75,000–80,000?rpm, respectively. The NO emissions were reduced to 337?ppm (16% O₂), which was about one-third of that of the base system. Simultaneously, unburnt NH₃ was reduced significantly, especially at the low electrical power output, which was indicative of the wider operating range with high combustion efficiency. In addition, N₂O emissions, which have a large Global Warming Potential (GWP) of 298, were reduced significantly, thus demonstrating the potential of NH₃ gas-turbine power generation with low environmental impacts.     

Gradient-norm-based histogram equalization taking account of HSV color space distribution

In the present paper, we propose an image contrast enhancement method that can enhance the contrast of a color image naturally by taking account of a color space shape. The proposed method realizes the natural enhancement based on two kinds of intensity histograms: a gradient-norm-based histogram and an ideal histogram derived from the shape of a color space. The former histogram is used to suppress over-enhancement in the flat regions of an image and the latter histogram is used to prevent the whole image from being darken. Concretely, the aforementioned intensity histograms are appropriately mixed into a histogram with a weight based on the average intensity of the input image. The contrast enhancement of the input image is realized using the cumulative histogram of the mixed histogram as an intensity transform function. To verify the validity of the proposed method, in experiments, the proposed method is applied to a variety of images and experimental results are evaluated qualitatively and quantitatively.     

Amorphous film thickness dependence for epitaxy of perovskite oxide films under excimer laser irradiation

We have studied the epitaxial growth of perovskite manganite LaMnO₃ (LMO) on SrTiO₃(1 0 0) in the excimer laser assisted metal organic deposition process. The LMO was preferentially grown from the substrate surface by the KrF laser irradiation. The study of amorphous LMO film thickness dependence on epitaxial growth under the excimer laser irradiation revealed that the photo-thermal heating effect strongly depended on the amorphous film thickness due to a low thermal conductivity of amorphous LMO: the ion-migration for chemical bond-forming at the reaction interface would be strongly enhanced in the amorphous LMO film with the large film thickness about 210 nm. On the other hand, the photo-chemical effect occurred efficiently for the amorphous film thickness in the range of 35-210 nm. These results indicate that the epitaxial growing rate was dominated by the photo-thermal heating after the photo-chemical activation at the growth interface.     

Low temperature deposited Zr-B film applicable to extremely thin barrier for copper interconnect

We have prepared thin Zr-B films at low temperatures as a new material applicable to an extremely thin barrier against Cu diffusion in Si-ULSI metallization. The obtained Zr-B films mainly consist of the ZrB₂ phase with a nanocrystalline texture on SiO₂ and a fiber texture on Cu. The resistivity of the Zr-B films depends on the substrate of SiO₂ or Cu. The constituent ratio of B/Zr is almost 2, though the contaminants of oxygen, nitrogen, and carbon are incorporated in the film. The nanocrystalline structure of the Zr-B film on SiO₂ is stable due to annealing at temperatures up to 500 °C for 30 min. We applied the 3-nm thick Zr-B film to a diffusion barrier between Cu and SiO₂, and the stable barrier properties were confirmed. We can demonstrate that the thin Zr-B film is a promising candidate for thin film application to a metallization material in Si-ULSIs.     

Quantitative approach to ultrasonic emulsion separation

Ultrasound of 2MHz was irradiated to the emulsion prepared from canola oil and water and flocculation of the oil droplets occurred immediately. By putting the emulsion sample in a thin glass cell and setting it in bath type irradiation equipment, the progress of the separation was quantitatively monitored with the optical absorbance. The use of the cell enables visual observation of the behavior of oil droplets. Pictures show the formation of flocks of the dispersed phase and the appearance of checkered pattern consisting of flocks at a regular interval. The observation indicates that the action of radiation forces on oil droplets, which causes the flocculation. The flocks started to rise after stopping irradiation with holding their shape. The rising rate of the flocks was significantly greater than that of oil droplets in the original emulsion. Ultrasonic irradiation caused a rapid decrease in the absorbance, which expresses a progress of the separation. Effects of two major operation parameters, power and time on the separation degree were examined. The degree improved with increasing power input and irradiation time. The dataset was arranged in a plot of normalized separation degree against the input energy. The plot suggests that effective separation was attained with a lower power input and a longer irradiation time. The plot provides a guide for setting condition for the separation.     

Ultrasonic intensity microscopy for imaging of living cells

Ultrasound intensity microscopy was developed for in vivo imaging. This paper describes the preliminary results obtained using 300 MHz ultrasound intensity microscopy for in vitro characterization of cell cultures. The novelty of the approach lies in the fact that it allows remote, non-contact and disturbance-free imaging of cultured synovial cells and the changes in the cells’ properties due to external stimulants such as transforming growth factor beta-1 (TGF-β1). The intensity imaging method has potential for extracting mechanical cell properties and monitoring the effects of drugs.Ultrasound propagates through a thin specimen such as cultured cells and is reflected at the interface between the specimen and substrate. A two-dimensional distribution of the ultrasonic intensity, which is closely related to the mechanical properties, is visualized to analyze cell organs, such as the nucleus at the central part and the cytoskeleton at the peripheral zone. After stimulation with TGF-β1, the ultrasonic intensity at the actin zone was significantly increased compared with the control.     

Effect of surfactants on the porous structure of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) hydrogels prepared by an emulsion templating method

Stimuli-sensitive porous hydrogels prepared with an emulsion templating method developed by the authors are potentially applicable in the medical and pharmaceutical fields; thermosensitive N-isopropylacrylamide (NIPA) hydrogels having randomly distributed sphere-like cavities have been prepared by the polymerization in an aqueous phase in an oil-in-water (O/W) emulsion, followed by the washing of oil (oleyl alcohol) microdroplets. The surfactant plays a dominant role in the preparation of porous hydrogels and the pore size. This study concerns with the surfactant effects on the stability of pre-gel O/W emulsions. The porous NIPA hydrogels were successfully prepared using the surfactants forming the stable emulsion and their internal structures and swelling properties were characterized. The O/W emulsions and the porous hydrogels prepared using various amounts of oil and surfactant were characterized. The information obtained serves for preparation of porous hydrogels having suitable porous structure for their applications.     

Allosteric coextraction of sodium and metal ions with calix[4]arene derivatives 1

Solvent extraction of three alkali metal ions with p-t-octylcalix[6]arene hexacarboxylic acid, p-t-octylcalix[4]arene tetracarboxylic acid, corresponding linear trimeric and monomeric analogs was investigated. Cyclic tetramer selectively extracts sodium ion among alkali ions at extremely low pH, while the corresponding cyclic hexamer, the trimer, and the monomer exhibited only poor extraction ability for all alkali metals examined. The detailed extractive investigation of sodium ions with the cyclic tetramer was carried out. It was found that two sodium ions are simultaneously extracted by a single molecule of calix[4]arene derivative and that the second sodium extraction is facilitated by the uptake of the first sodium. The self-coextraction mechanism of sodium ions proposed in the present paper also strongly supports allosteric coextraction of sodium and other metal ions. In the competitive extraction of four alkali metal ions, potassium ion was slightly extracted as the second ion at low pH region, whereas it was hardly extracted in the individual extraction system. The result also supports the coextraction mechanism and role of the first-extracted sodium ion as an allosteric trigger. The extraction equilibrium constants of the cyclic tetramer and two sodium ions, K _ex1 and K _ex2, were estimated.     

Hydrogenolysis of the cyclopropyl group into an isopropyl group in the presence of a platinum catalyst and hydrobromic acid

Reduction of cyclopropylmethylamines proceeded under mild reaction conditions in the presence of platinum (IV) oxide catalyst and hydrobromic acid at rt, providing isobutylamines and no linear butylamines. The ring cleavage reaction was widely applicable to cyclopropane rings in various compounds such as N-cyclopropylalkyl, O-cyclopropylalkyl, and C-cyclopropylalkyl derivatives. Although unactivated cyclopropane rings were also cleaved, the cyclobutane ring was tolerated under the same reaction conditions.     

A facile access to spiro furanone skeleton based on Pd(II)-mediated cyclization-carbonylation of propargylic esters

The oxidative cyclization-carbonylation of propargylic esters mediated by Pd(II) afforded cyclic orthoesters, which were hydrolyzed into γ-acetoxy-β-ketoesters. Based on the NMR experiments, it was presumed that the cyclization reaction was initiated by a nucleophilic attack of carbonyl oxygen to the alkyne carbon coordinated to palladium(II). When the γ-acetoxy-β-ketoesters were treated with a basic condition, Knoevenagel-Claisen type condensation took place, and spiro furanone derivatives were obtained in good yields. We applied these reactions to steroid derivatives, and steroid derivatives having a spiro furanone fragment were synthesized. Among them, the spiro furanone 4j had vasorelaxant and bradycardiac activities. Compounds 2i-4k had inhibitory effect on CYP3A.