Changes in the reactivity of the fluorescent reagents carbazole-9-carbonyl chloride and 9-carbazolylacetic acid in the presence of cyclodextrins

Carbazole-9-carbonyl chloride (C9CC) and 9-carbazolylacetic acid (9CAA) were selected as model fluorescent reagents. The effect of different chemically modified cyclodextrins (CDs) added to the aqueous solutions of these reagents was studied in water and in buffered aqueous solutions at pH 4.5 and 8.8. The CDs employed were 2-hydroxypropyl-β-cyclodextrin (HP-βCD), 2,3-di-O-methyl-β-cyclodextrin (DM-βCD) and 2,3,6-tri-O-methyl-β-cyclodextrin (TM-βCD). The inclusion of these reagents inside the cavities of the CDs was verified and this process can affect the derivatization reaction because CDs can modify the reactivity of the guest molecules. The basic conditions necessary for the derivatization reaction between C9CC and amines lead to the formation of carbazole anion through hydrolysis followed by decarboxylation. In the presence of CDs, the hydrolysis-decarboxylation of carbazole-9-carbonyl chloride is faster than in buffered aqueous homogeneous solutions. The behaviour observed for these reagents in aqueous solutions of CDs was compared to the one observed in basic ethanolic solutions. These changes are particularly noticeable in the case of 2,3-di-O-methyl-β-CD and 2-hydroxypropyl-β-CD. The characteristics of the fluorescent reagents are compared to carbazole and 9-methylcarbazole as model compounds. This paper was presented at XIIIth International Cyclodextrin Symposium. Torino, Italy, May 14–17, 2006.     

A sensitive, rapid and specific determination of midazolam in human plasma and saliva by liquid chromatography/electrospray mass spectrometry

A rapid, sensitive and selective liquid chromatography/electrospray mass spectrometry (LC/ES-MS) method was developed for the quantitative determination of the anaesthetic benzodiazepine midazolam (MID) in human saliva and plasma from patients undergoing anesthesia procedures. Biological samples spiked with diazepam-d5, the internal standard, were extracted into diethyl ether. Compounds were separated on a Xterra RP18 column using a mobile phase of acetonitrile/formic acid 0.1% at a flow rate of 0.25 mL/min under a linear gradient. Column effluents were analyzed using MS with an ES source in the positive ionization mode. Calibration curves were linear in the concentration ranges of 1-250 and 0.2-25 ng/mL in plasma and saliva, respectively. The limits of detection were 0.5 ng/mL in plasma and 0.1 ng/mL in saliva, using a 0.5-mL sample volume. The recoveries of the spiked samples were above 65%. The method was applied to ten real samples from patients undergoing midazolam treatment.     

Absolute configuration of C2-symmetric spiroselenurane: 3,3,3',3'-tetramethyl-1,1'-spirobi[3 H,2,1]benzoxaselenole

The enantiomers of 3,3,3',3'-tetramethyl-1,1'-spirobi[3 H,2,1]benzoxaselenole have been separated on a chiral preparative chromatographic column. The experimental vibrational circular dichroism (VCD) spectra have been obtained for both enantiomers in CH(2)Cl(2). The theoretical VCD spectra have been obtained by means of density functional theoretical calculations with the B3 LYP density functional. From a comparison of experimental and theoretical VCD spectra, the absolute configuration of an enantiomer with positive specific rotation in CH(2)Cl(2) at 589 nm is determined to be R. This conclusion has been verified by comparing results of experimental optical rotatory dispersion (ORD) and electronic circular dichroism (ECD) to predictions of the same properties using the B3 LYP functional for the title compound.     

Asymmetric synthesis of 2H-azirines derived from phosphine oxides using solid-supported amines. Ring opening of azirines with carboxylic acids

A simple and efficient asymmetric synthesis of 2H-azirine-2-phosphine oxides 3 is described. The key step is a solid-phase bound achiral or chiral amine-mediated Neber reaction of beta-ketoxime tosylates derived from phosphine oxides 1. Reaction of 2H-azirines 3 and 11 with carboxylic acids 4 gives phosphorylated ketamides 5 and 12. Ring closure of ketamides 5 and 12 with triphenylphosphine and hexachloroethane in the presence of triethylamine leads to the formation of phosphorylated oxazoles 8 and 13.     

Synthesis of pyrazine-phosphonates and -phosphine oxides from 2H-azirines or oximes

[reaction: see text] Tetrasubstituted pyrazines containing two phosphonate groups 2 in positions 2 and 5 and trisubstituted pyrazines containing a phosphonate 5 or a phosphine oxide group 7 in position 2 are obtained by thermal treatment of 2H-azirine-2-phosphonates 1 and -phosphine oxides 6. These pyrazines can also be prepared from beta-ketoxime tosylates 9 and 10 or from oxime derived from phosphine oxide 11.     

XRD and Si MAS-NMR spectroscopy across the β-Lu2Si2O7-β-Y2Si2O7 solid solution

Samples in the system Lu_2−xY_xSi₂O₇ (0?x?2) have been synthesized following the sol-gel method and calcined to 1300 °C, a temperature at which the β-polymorph is known to be the stable phase for the end-members Lu₂Si₂O₇ and Y₂Si₂O₇. The XRD patterns of all the compositions studied are compatible with the structure of the β-polymorph. Unit cell parameters are calculated as a function of composition from XRD patterns. They show a linear change with increasing Y content, which indicates a solid solubility of β-Y₂Si₂O₇ in β-Lu₂Si₂O₇ at 1300 °C. ²⁹Si MAS NMR spectra of the different members of the system agree with the XRD results, showing a linear decrease of the ²⁹Si chemical shift with increasing Y content. Finally, a correlation reported in the literature to predict ²⁹Si chemical shifts in silicates is applied here to obtain the theoretical variation in ²⁹Si chemical shift values in the system Lu₂Si₂O₇-Y₂Si₂O₇ and the results compare favorably with the values obtained experimentally.     

Insights into the absorption of carbon dioxide by zinc substrates: isolation and reactivity of di- and tetranuclear zinc complexes

The heptadentate Schiff base H(3)L can react with zinc acetate to form the discrete dinuclear complex Zn(2)L(OAc)(H(2)O), 1.H(2)O. The reaction of 1.H(2)O with NMe(4)OH.5H(2)O both in air and under an argon stream has been investigated. On one hand, this reaction in air yields the tetranuclear complex (Zn(2)L)(2)(CO(3))(H(2)O)(6), 2.5H(2)O, by spontaneous absorption of adventitious carbon dioxide. This process can be reverted in an acetic acid medium, whereas the treatment of 2.5H(2)O with methanoic acid yields crystals of [Zn(2)L(HCOO)].0.5MeCN.1.25MeOH.2H(2)O, 3.0.5MeCN.1.25MeOH.2H(2)O. On the other hand, the interaction under an argon atmosphere of 1.H(2)O with NMe(4)OH.5H(2)O in methanol allows the isolation of the dinuclear complex Zn(2)L(OMe)(H(2)O)(4), 4.4H(2)O. Recrystallisations of 1.H(2)O, 2.5H(2)O and 4.4H(2)O, in different solvents, yielded single crystals of 1.MeCN.2.5H(2)O, 2.4MeOH and 4.3MeOH.H(2)O, respectively. The crystal structure of 2.4MeOH can be understood as resulting from an unusual asymmetric tetranuclear self-assembly from two dinuclear units, and shows three different geometries around the four zinc atoms.     

Extraction of Pb(II), Cd(II), and Hg(II) from aqueous solution by nitrogen and thiol functionality grafted to silica gel measured by calorimetry

The reaction of ethylene sulfide with 3-aminopropyltrimethoxysilane gave a new silylating agent, which was anchored onto a silica surface via the sol–gel procedure. This surface displayed a chelating moiety containing nitrogen and two sulfur basic centers potentially capable of extracting cations from aqueous solutions. The process of metal extraction was followed by a batch method, and fitted to a modified Langmuir equation. The maximum adsorption capacities found were: 2.06 ± 0.01, 3.72 ± 0.02, and 5.14 ± 0.02 mmol g⁻¹ for Pb(II), Cd(II), and Hg(II), respectively. The enthalpies of bending are: −1.16 ± 0.04, −3.60 ± 0.10, and −8.94 ± 0.03 kJ mol⁻¹ for Cd(II), Pb(II), and Hg(II), respectively. The Gibbs free energies of binding agree with the spontaneity of the proposed reactions between cations and basic centers.     

Application of low-pressure gas chromatography-ion-trap mass spectrometry to the analysis of the essential oil of Turnera diffusa (Ward.) Urb

Turnera diffusa Willd. var. afrodisiaca (Ward) Urb. (syn. T. aphrodisiaca) belongs to the family of Turneraceae and is an aromatic plant growing wild in the subtropical regions of America and Africa. It is widely used in the traditional medicine as e.g. anti-cough, diuretic, and aphrodisiac agent. This work presents a 3 min chromatographic analysis using low-pressure (LP) gas chromatography (GC)-ion-trap (IT) mass spectrometry (MS). The combination of a deactivated 0.6 m x 0.10 mm i.d., restrictor with a wide-bore CP-Wax 52 capillary column (10 m x 0.53 mm i.d., 1 microm) reduces the analysis time by a factor of 3-7 in comparison to the use of a conventional narrow bore column. Chromatographic conditions have been optimized to achieve the fastest separation with the highest signal/noise ratio in MS detection. These results allow fast and reliable quality control of the essential oil to be achieved.     

Determination of organophosphorus and triazine pesticides in olive oil by on-line coupling reversed-phase liquid chromatography/gas chromatography with nitrogen-phosphorus detection and an automated through-oven transfer adsorption-desorption interface

A method is described for the simultaneous determination of organophosphorus and triazine pesticides in olive oil, whereby reversed-phase liquid chromatography (LC) is coupled to gas chromatography by means of an automated through-oven transfer adsorption-desorption (TOTAD) interface. The olive oil needs to be filtered only before it is loaded into the liquid chromatograph, where preseparation of the pesticide residues from the other olive oil components is carried out by using methanol-water as the eluant. The LC fraction containing the pesticides is automatically transferred to the gas chromatograph by using the TOTAD interface, which almost totally eliminates the solvent, so that water-sensitive detectors such as the nitrogen-phosphorus detector can be used. Detection limits range from 0.07 to 0.38 microg/L for organophosphorus pesticides and from 6.0 to 7.0 microg/L for triazines. The results were compared with those obtained by flame ionization detection.